Death by Audio Total Sonic Annihilation 2 Feedback Looper Pedal

The TSA2 works on a simple premise: what if effect pedals were patched back into themselves? What does it sound like for a filter to be multiplied by infinity? Or if your modulator was modulating its own modulations? The TSA2 creates a controllable feedback loop, causing your pedals to cycle back on themselves, feeding the output back into the input as much or as little as you want. Experience true sonic exploration: every unique pedal array will produce a vast world of textures and possibilities.

CONTROLS

• ON: In the ON position, this toggle switch activates the ACTIVE BOOST circuit.
• PHASE: Flips the phase of the effects loop, only when the ACTIVE BOOST is on.
• GAIN: Controls the amount of gain of the ACTIVE BOOST circuit.
• LIMIT: Limits the output volume of the entire pedal only when the ACTIVE BOOST is engaged.
• STOMP SWITCH: Bypasses the effect.
  
  

CONNECTIONS

• INPUT: Plug an instrument into this jack.
• OUTPUT: The output of the Total Sonic Annihilation 2 is here. It connects to your amplifier.
• SEND: Connect this to the input of the effect (or chain of effects) you would like to control and warp. If left unconnected it is connected internally to the receive jack.
• RECEIVE: This is connected to the output of the effects in the feedback loop.
• 9V: Plug a 9V Negative Tip Positive Ring DC adaptor in here. When plugged in it will bypass the internal battery. NOTE: When the ACTIVE BOOST is not engaged, the pedal is completely passive and can work without power.