Event 20/20BAS V3 Active Studio Monitor (Single)

0 Review(s) | Add Your Review SKU: EVENT-2020-BASV3 |UPC: 0698813002221
Event Electronics
Event 20/20
Event 20/20 Event 20/20 Event 20/20

Availability: Out of stock

$349.50
Earn points:
349
Reward Points earn 10 Points for reviewing this product.

A whole new generation of legendary 20/20 sound.


 


NOTE: This is for ONE monitor, NOT a pair

Related Products

First released in 1995, the original 20/20 nearfield studio monitor revolutionised the recording industry and secured itself a place in the hearts of audio engineers the world over for its truthful reproduction and outstanding sonic character.

 

Now Event is proud to announce a new generation of clarity, transparency and definition with the release of the 20/20BAS. This two-way front ported speaker incorporates a number of fundamental improvements over the original model while remaining true to its tonal character and performance strengths.

 

Event's engineering team used ideas and technologies from its flagship Opal speaker in order to achieve performance in keeping with the company design philosophy of high output, low distortion and excellent dynamics.

 

 

A Modern Classic

 

First released in 1995, the original 20/20 nearfield studio monitor was universally acclaimed and launched the Event brand worldwide. Using manufacturing processes and materials unheard of at the time, the 20/20 combined a magnetically shielded 25mm natural silk dome with an 8" mineral-impregnated polypropylene cone. A laminated and internally dampened MDF cabinet with a front-mounted large diameter bass port assisted in providing the 20/20's impressive low end response.

 

A year later Event released a powered version, the 20/20bas, to critical acclaim from engineers, musicians and the media alike. The very first pair of 20/20bas speakers were used by Francis Buckley to mix Quincy Jones' Q's Jook Jointalbum for which he won the 1996 Grammy Award for Best Engineered Album.

 

The New 20/20BAS 

 

Now fifteen years later Event is pioneering a new generation of clarity, transparency and definition with the release of the 20/20BAS. This speaker incorporates a number of fundamental improvements over the original model while remaining true to its character and performance strengths.

 

The original transducer design and cabinet volume have been maintained, however the high and low frequency amplifiers, cabinet bracing and overall construction have been revolutionised to improve audio characteristics, increase dynamics and extend reliability.

 

Opal Technology

 

Event's engineering team used ideas and technologies from its flagship Opal speaker in order to achieve performance in keeping with the company design philosophy of high output, low distortion and excellent dynamics.

Fully discrete Class AB amplifiers for the tweeter and woofer provide up to 250 watts of burst power with less than .01% Total Harmonic Distortion (THD). This more than doubles the power provided by the original 20/20bas amplifier design with less than half the distortion. Sustained high output performance is ensured through a new oversized toroidal power supply that can ensure sustained extreme low frequency reproduction.

"We were very respectful to the original 20/20 speaker" explains Event's Director of Engineering, Marcelo Vercelli. "Everyone in Event's design department has great respect for the speaker, but we saw a few areas where we could use techologies developed for Opal to get even better dynamics with lower distortion. The new low frequency amp can deliver up to 250w of peak power into the woofer. This gives you the BOOM... the definition in the bottom end that you're looking for."

Additional Information

Condition New
SKU EVENT-2020-BASV3
UPC 698813002221

System

  • Frequency Response: 35Hz - 20kHz ±2dB
  • Crossover Frequency: 2300Hz
  • 3rdHarmonic Distortion @ 90dB SPL, 1m,500-7kHz0.08%
  • 3rd Harmonic Distortion @ 90dB SPL, 1m,200 - 20kHz0.2%
  • 3rd Harmonic Distortion @ 90dB SPL, 1m,<200Hz1.5%
  • Acoustic Output - SPL @ 1m, Long term(80Hz - 20kHz)105dB
  • Acoustic Output - SPL @ 1m, Peak(80Hz - 20kHz)108dB
  • Signal InputXLR (balanced)

 

Low Frequency Transducer

  • Piston Diameter: 180mm (7.1")
  • Voice Coil Configuration: High temperature single coil
  • Voice Coil Diameter: 38mm (1.5")
  • Former Material: High-strength Polyamide - Glass Fiber
  • Magnet Type: Ferrite
  • Cone Type: Mineral Filled Polypropylene
  • Magnetic Shielding: Bucking magnet and steel cap

 

High Frequency Transducer

  • Dome Diameter: 25.4mm (1")
  • Voice Coil Diameter: 25mm (0.98")
  • Magnet Type: Ferrite
  • Dome Type: Silk
  • Gap Design: Ferrofluid Cooled
  • Magnetic Shielding: Bucking Magnet

 

Amplifier - Low/high frequency

  • Frequency Response: 20Hz - 20kHz(±0.2dB)
  • Operating Band Pass: 20Hz - 2400Hz (LF)/2400Hz - 20kHz (HF)
  • Total Harmoic Distortion: 0.01% 120 Watts into 4 Ohm Load
  • Long Term Power @ 4 Ohms: 80 Watts
  • Burst Power @ 4 Ohms: 120 Watts
  • Output Topology: Class AB
  • LF Trim: Constantly variable ±3dB
  • HF Trim: Constantly variable ±3dB
  • Subsonic Filter: -3dB @ 30Hz
  • Driver Protection: Current Limiting
  • Temperature Protection: Thermal Cut-Off Switch
  • Indicators: Event badge 'On' mode
  • Cooling: Convection - Aluminium Heat Sink
  • Power Requirements: Voltage selector 110-120V or 220-240V, 50/60Hz, 180VA ; Power via detachable 3 circuit IEC type linecord

 

Physical

  • Cabinet Construction: MDF
  • Low Frequency Vents: Front Port
  • Cabinet Dimensions: 260mmW x 375mmH x 310mmD ; (10.2"W x 14.8"H x 11.8"D)
  • Cabinet Weight: 17kg (37.48lb)
  • Shipping Dimensions: 375mmW x 495mmH x 415mmD ; (14.8"W x 19.5"H x 16.3"D)
  • Shipping Weight: 19kg (41.88lb)

 

Write Your Own Review

Only registered users can write reviews. Please, log in or register