This product has been discontinued.
IK Multimedia iRig Stomp I/O Usb Pedalboard Controller
iRig Stomp I/O is a pedalboard controller with integrated audio/MIDI interface for iPhone, iPad and Mac/PC. It's the ideal way for guitarists, vocalists and more to perform live or record in the studio with a single, simple solution that provides pristine sound quality and superior control over any virtual rig.
4 assignable stomp switches, a built-in expression pedal, 2 expansion jacks and full MIDI I/O, let you control your rig your way whether live on stage on in the studio, with dedicated control for AmpliTube and other popular apps, as well as easy configuration to adjust to any setup. iRig Stomp I/O is built road-tough with a rugged metal chassis, and offers easy visual indicators for status, signal and volume for use on stage. It includes built-in integration with IK's AmpliTube and VocaLive software, as well as presets for other popular apps, but even works stand-alone without a device as a full-featured MIDI foot controller.
iRig Stomp I/O also offers everything you need to connect instruments or microphones with pristine audio quality. It's a complete 24-bit, 96 kHz audio interface, with Neutrik combo jack, switchable phantom power, adjustable input and output volume and both 1/4"" balanced and headphone outputs. Everything connects to your device through one single cable (both Lightning and USB cables included) for an elegant, simple solution for performing or recording.
Whether live or on-stage, iRig Stomp I/O offers complete control and easy routing for any setup. An optional power supply will also charge your iOS device, or iRig Stomp I/O can be run off your laptops' USB power for minimal cable hassles. And to complete the package, iRig Stomp I/O includes over $800 worth of apps and software, including AmpliTube 5 SE, the latest generation of IK's award-winning amp & FX modeling software, plus the new TONEX SE, IK's groundbreaking AI-powered Tone Model capture software to clone your actual gear digitally.
It's never been easier or more convenient to take your rig virtual than with iRig Stomp I/O.
- MIDI floor controller with 4 stomp switches & built-in expression pedal
- 24-bit, 96 kHz audio interface with Neutrik combo input
- Compatible with iPhone, iPad, Mac & PC, with Lightning and USB cables included
- Optional expansion jacks and MIDI I/O for more advanced setups
- Includes AmpliTube 5 SE and TONEX SE Amp & FX modeling & capture software & apps
Common
- Conversion: 24-bit A/D, 24-bit D/A
- Sampling Rate: 44.1 kHz, 48 kHz, 88.2 kHz and 96 kHz
- Power: USB bus powered (when used with a computer) or DC IN
- Device Connection: USB B-Type and Mini-DIN
- Enclosure: metal sheet
Microphone Input
- Connector: balanced female 3-pin XLR. Pin 2: hot / Pin 3: cold / Pin 1: ground
- Microphone Input Level: from 6 mVpp to 1.4 Vpp
- Microphone Input Impedance: approx 2 kOhms
- Gain Range: approx 48 dB
- Phantom Power: +48V ± 4V
- Frequency Response: 20 Hz – 20kHz +/-1.5dB
- Input Noise: -103 dB(A), -97 dB RMS
Instrument Input
- Connector: unbalanced, Hi-Z, TS 1/4" Jack. Tip: signal / Shield: ground
- Instrument Input Level: from 30mVpp to 6.9Vpp
- Instrument Input Impedance: 1MOhms
- Gain Range: approx 27dB
- Frequency response: 20 Hz – 20kHz +/-1.5dB
- Input Noise: -103 dB(A), -97 dB RMS
Stereo Headphone Output
- Connector: 1/8" TRS Jack. Tip: right / Ring: left / Shield: ground
- Headphone Level control: numbered thumbwheel
- Headphone Output Power: 100mW into 50Ohms
Stereo Line Output
- Connector: 2x balanced female 1/4" TRS Jack. Tip: hot / Ring: cold / Shield: ground
- Maximum Output Level: +16 dBu into 600 Ohms balanced load
- Output Impedance: 150 Ohms balanced
- Floating Balanced Outputs
MIDI Input/Output
- Connector: 2x 5-pin DIN
- Connections and Controls
Top Panel
- Four metal foot-switches with one indication LED each, dual color
- Two analog potentiometers for Input GAIN and output VOLUME
- "Stomp MODE" LED
- "Phantom 48V" LED
- "PEDAL" LED
- 4 segments mono input level meter (peak)
- 4 segments device output meter
- Continuous pedal (expression pedal) with virtual switch at the top of its travel
Rear Panel
- Neutrik Combo socket for MIC input and Instrument input (auto selecting)
- +48V phantom power switch
- 1/4" headphones output
- 2 x 1/4" TRS Balanced floating line outputs
- MIDI I/O 5-pin DIN connectors
- 2 x 1/4" TRS External controllers sockets
- B-Type USB socket for connecting a computer (Mac/PC)
- Mini-DIN "iOS" connector for connecting an iOS device
- Barrel DC-in socket for powering up the Stomp I/O and charging the iOS device at the same time
Package includes
- iRig Stomp I/O
- Lightning to Mini-DIN connection cable (60cm/23.62")
- USB A-Type to USB B-Type connection cable (2.5m/8.2ft)
- DC power supply
Dimensions
- Size: 41.5cm/16.3" x 21cm/8.5" x 7.2cm/2.83"
- Weight: 3.2kg/7.1lb
- Lightning to Mini-DIN connection cable (60cm/23.62")
- USB A-Type to USB B-Type connection cable (2.5m/8.2ft)
| Condition | New |
|---|---|
| SKU | IKM-IRIG-STOMP-IO |
| UPC | 8025813749030 |