Milkman Sound 20W Creamer Amp Head, New Moon Walnut

I design amps based on my own experience and needs, and when it came time to design the Creamer, I wanted to find a balance between a perfectly voiced guitar tone with a fair amount of power and portability. Everyone loves low power vintage amplifiers, but sometimes I need a bit more power, reliability, and headroom on the gig. In studio, the Creamer is virtually silent when idle. Its the ultimate refinement and alternative to the vintage small format amplifier. 

I wanted the Creamer to be very versatile so I included an adjustable cathode bias circuit so that the user can easily substitute 6L6 or 6V6 output tubes with no need to rebias the output tubes. I have added a rear mounted switch to maintain an 8ohm speaker output regardless of which tube type used. Inside of the chassis, you will find an internal bias adjustment in case you want to fine tune the cathode bias when substituting in vintage tubes which tend to draw more current. 

With 6V6 the Creamer puts out about 20 watts into 8ohms and has sweet breakup. Put a pair of 6L6s in, flip the switch on the rear panel and you get a bit of more low end, subtler mids, and a touch more headroom. 

The tremolo circuit in the Creamer is unique and sounds outstanding. It is harmonically rich, deep, and has a very useful range of speed.  

Like all Milkman amplifiers, the Creamer is built using the finest possible components onto a turret board, and is hand wired with cloth covered wire.