PreSonus SCEPTRE S6 Active Studio Monitor Pair with Stands, Isolation Pads, and Mogami Cables

PreSonus SCEPTRE S6 Active Studio Monitor Pair with Stands, Isolation Pads, and Mogami Cables

PreSonus SCEPTRE-S6 High Definition CoActual Active Studio Monitor

The first time you hear Sceptre-series CoActual™ 2-way studio monitors, you’ll discover fine nuances of your music that can’t be reproduced by conventional designs. The Sceptre’s panoramic soundstage, fine detail, and stunning dynamics will astonish you.
Each Sceptre monitor contains a DSP chip that enables the use of Fulcrum Acoustic’s TQ algorithms. The result is speakers that deliver the full benefits of coaxial design.

Sceptres provide extensive user-adjustable contour features that let you optimize the monitors for any mixing space.
The Sceptre series includes two models with the same high/mid coaxial section. The S6 delivers far better bass response than you’d expect for its size. The S8’s bass response is downright stunning.

CoActual technology

• Combines DSP time-correction and point-source design for symmetrical soundstage and micro-definition imaging 

• Unique coaxial transducer integrates 8-inch (Sceptre S8) or 6.5-inch (Sceptre S6) midrange driver and 1-inch (25 mm), horn-loaded HF transducer with Coaxial Speaker Coherence Alignment 

• Powerful DSP provides critical Temporal Equalization™ with multiple FIR filters 

Acoustic-tuning controls

• HF Driver Adjust (0 dB, +1 dB, -1.5 dB, -4 dB) 

• Acoustic Space settings (0 dB, -1.5 dB, -3 dB, -6 dB) 

• High-pass filter (Off, 60 Hz, 80 Hz, and 100 Hz, -24 dB/octave slope) 

• Sensitivity (+4 dBu to -10 dBV) 

Power and safety

• 180W RMS, Class D biamplification with internal heat sink 

• 102 dB maximum continuous SPL

• RF shielding, current-output limiting, and over-temperature protection 

• Amplifier “soft start” feature eliminates popping on power-up 

• Internal power supply with IEC connector 

• Power switch with on/off LED

Inputs and outputs

• Balanced XLR and ¼-inch TRS line-level inputs with A-taper level control

Ultimate Support JS-MS70 Jamstands Adjustable Studio Monitor Stands (Pair)

If you're just starting out and have smaller studio monitors that you'd like to set on stands, the JS-MS70 is the perfect solution for you! The stable low-profile base can easily be positioned into tight spaces and includes both leveling floor spikes for carpeted areas and rubber feet for hard wood and tile surfaces. The JS-MS70 has four heights from 32.5" to 44.25" and can be securely locked into place with the included locking pin.

Features

• Height-adjustable stand for studio monitors
• Locking pin ensures stable and accurate height positions
• Leveling floor spikes and rubber feet included
• Low-profile base can be easily positioned into tight spaces

Mogami Gold 1/4" TRS Male to XLR Male Cable - 10 ft

This balanced patch cable with gold-pin/black body ¼" TRS and male XLR connectors is a popular choice for powered speakers. Mogami Gold TRS-XLRM uses Neglex™ Studio Quad cabling, legendary for clarity and freedom from noise/RF interference. Neglex™ type Quad cables are designed for the highest quality recording applications where maximum definition is critical. 

Features

• The finest patch cable you can buy for neutral tone and noise rejection
• Conductor insulation is XLPE (Cross-Linked Polyethylene) for excellent sonic clarity
• Mogami Signature Ultra High Density Spiral Pure Copper Shield for superior sound quality and silent background
• A perfect choice for high end audio equipment
• Lifetime warranty

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer, reproductive, and developmental harm. For more information, visit www.p65warnings.ca.gov

Auralex MoPAD Monitor Isolation Pads for Studio Monitoring

Your loudspeakers are the most critical components you use to verify the quality of your work. No matter how good your mixer, mics, preamps, cables, and other pieces of gear that you've invested in, you're not truly hearing what your recordings sound like until you isolate your monitors from their environment.

This is where the Auralex MoPADs come in. MoPAD Monitor Isolation Pads provide sonic isolation between your monitors and whatever your monitors are resting on, INSTANTLY improving the accuracy of your entire monitoring system.

MoPADs are designed so that they can be used to support virtually all sizes of bookshelf loudspeakers or recording monitors up to 100 lbs. each. While some smaller loudspeakers may be sufficiently supported by a single MoPAD, most require the support of two MoPADs.

MoPADs are affordable, easy to implement and really effective at decoupling your monitors from your room and all its contents. You've gotta get some! Until you do, you'll never know what your recordings really sound like.

MoPADs are extraordinarily effective AND really versatile. There are 5 different positioning options available. By using the included MoPAD Wedge Adjusters, you can adapt your loudspeakers to listening angles of -8°, -4°, 0°, +4° and +8°, as shown below.

• Dimensions: 12" long x 4" wide
• Weight Limitations: 100lbs.