AEA R84 Large Ribbon Studio Microphone with Cable and Carrying Case

SKU
AEA-R84
AEA R84 Large Ribbon Studio Microphone with Cable and Carrying Case AEA R84 Large Ribbon Studio Microphone with Cable and Carrying Case
AEA R84 Large Ribbon Studio Microphone with Cable and Carrying Case
$1,099.00
Out of stock

AEA R84 Large Ribbon Studio Microphone with Cable and Carrying Case

Based on the character of the legendary R44, R84 series ribbon mics provide classic tonality with extended top-end and reduced proximity effect for medium and close range recording. The R84A is an active version of the R84, allowing its use with a wider range of preamplifiers.

A WORKHORSE RIBBON

The R84 series quickly endears itself to engineers and musicians due to its remarkably expansive frequency range complete with sweeping highs and booming lows. The R84’s balanced and manageable proximity effect just feet away from the source bolsters the low end of vocals, drums, and brass. With a ribbon mic as multi-purpose, lightweight, and maneuverable as the R84, it is well-suited for both close-up and ambient mic applications. The R84A retains the same sonic character of the R84 but offers an additional 12dB of output and a stable impedance giving it even more flexibility when used with quiet sources and any preamp.

A MODERN CLASSIC

The R84 is a staple in numerous recording studios because of its unique tonality and classic sound. Its smooth, high-frequency roll-off and reduced sibilance make it the go-to choice for engineers tracking vocals and other instruments that often sound harsh when recorded with condenser mics.The R84’s gorgeous mid-range captures the unique qualities of many instruments with detailed elegance. Its large low end is perfect for beefing up the sound of drum kits or thickening up the bass in thin vocals. It’s a mic that works well on practically any voice or musical instrument, making it useful tool in both recording and broadcast studios.

BIG SOUND IN COMPACT WAY

In 2000, AEA sought to design a more compact, lighter and less expensive version of the hefty, eight-pound RCA 44BX. The result was the R84, which includes the best of the 44 series in a lower cost, three-pound package. The R84 and original RCA 44 (now our R44C) share the same Big Ribbon element, transformer and other elements in the design. By using modern design techniques and stronger but smaller magnets in the R84, the classic RCA ribbon sound is retained.

However, the R84 has improvements  including less proximity effect, better top end, vibration isolation and greater placement flexibility on tight stages and in studios. The mic’s U-shaped yoke acts as a shock mount and also enables the user to position the R84 at numerous angles even with a straight stand.

YES, THERE’S A MATCHING PREAMP

Since the R84 is a passive ribbon microphone, the preamp is critical for optimum performance. Preamp gain should be at least +60dB or higher and it should have a very high impedance. It’s the same requirement with all passive ribbon mics.

To guarantee consistent, full-range ribbon sound with the passive R84, we recommend AEA’s RPQ2, RPQ500 and TRP2 preamps, which were specially designed for ribbon microphones. However, preamps with above a 5K ohm impedance found in many live soundboards are adequate for guitar amps and other louder instruments. On quiet sound sources or for distance recording, an AEA preamp is highly recommended. If you do not own a ribbon preamp, we recommend the active R84A because of its higher output and preamp flexibility.

Features

  • Warm, smooth and detailed classic ribbon sound
  • Full and rich tonality with generous highs and lows
  • Voiced like the legendary R44 Series but with less proximity effect
  • Versatile for both close and ambient applications
  • Made in the U.S.A.
  • Operating Principle: Pressure gradient transducer
  • Directional Pattern: Bidirectional
  • Frequency Range: <20 Hz to >20 kHz
  • Polarity: Pin 2 high for positive pressure on front of
  • microphone

Polar Response

  • Horizontal: Up to 90 dB rejection at right angles to the
  • front/back axis. 
  • Vertical: Level changes with angle of incidence, but
  • frequency response is consistent.
  • Transducer Element Material: Pure aluminum corrugated ribbon
  • Thickness: 1.8 µm
  • Width: 0.185 in (4.7 mm)
  • Length: 2.35 in (59.7 mm)

Microphone Dimensions

  • Height: 11.6 in (29.5 cm)
  • Width: 3.9 in (9.9 cm)
  • Depth: 2.5 in (6.4 cm)
  • Weight with cable: 3 lb (1.36 kg)
  • Connector: XLR-3M

R84 Passive Microphone

  • Maximum SPL: 165 + dB SPL (1% third harmonic > 1 kHz)
  • Sensitivity: 2.5 mV/Pa (-52 dBv/Pa) into unloaded circuit
  • Output Impedance: 270 Ω nominal
  • Recommended Load Impedance: 1.2K Ω or greater
  • Phantom Power: Not required or recommended

Accessories Included

  • Softcase, user manual, captive 10” (3 meter) output cable with XLR-3M connector
More Information
Condition New
SKU AEA-R84
UPC 4078621676
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account