RME AO4S-192 AIO 4-Channel Analog I/O Module with 192 kHz Support
This analog expansion board adds 4 analog outputs in professional quality to RME's HDSPe AIO. Level adjustment, balanced circuit design, 118 dBA SNR and highest suppression of PC-noise guarantee perfect sound quality.
The converters offer the same performance as the on-board stereo analog I/O of the HDSPe AIO - up to 192 kHz resolution, balanced connection, and the choice of 3 different reference levels, selected in the settings dialog.
The expansion board can be used with the HDSPe AIO and the HDSP 9632 to provide a maximum of 6 channels of audio output when combined with the 2 channels of I/O available on the main board. However, no more than one AO4S-192 AIO can be connected to each card, although a combination of an input and output card is possible.
Package Contents
Please ensure that all the following parts are included in the AO4S-192 AIO's packaging box:
- Analog Expansion Board
- 1 flat ribbon cable, 26 pins
- 1 set of nuts
- Manual, drill template
Hardware Requirements
The AO4S-192 AIO can only be connected to the HDSP 9632. No more than one AO4S-192 can be connected to each card.
Features
- Choice of 3 different reference levels
- Up to 24-bit/192kHz resolution
- Can be combined with similar input expansion board
- Analog output expansion card for the HDSPe AIO and the HDSP 9632, adding an additional 4 outputs to the system
- Servo balanced outputs on 1/4" TRS connectors
- Resolution DA: 24 Bit
- Signal to Noise ratio (SNR): 114 dB RMS unweighted, 118 dBA @ 44.1 kHz (unmuted)
- THD: < - 104 dB, < 0.00063 %
- THD+N: < -102 dB, < 0.0008 %
- Crosstalk: > 110 dB
- Maximum output level: +19 dBu
- Frequency response @ 44.1 kHz, -0.5 dB: 1 Hz – 22 kHz
- Frequency response @ 96 kHz, -0.5 dB: 1 Hz – 34 kHz
- Frequency response @ 192 kHz, -0.5 dB: 1 Hz – 50 kHz
- Output: 4 x 1/4" TRS jack, balanced
- Output impedance: 50 Ohm
- Output level: Hi Gain, +4 dBu, -10 dBV
- Output level at 0 dBFS @ Hi Gain: +19 dBu
- Output level at 0 dBFS @ +4 dBu: +13 dBu
- Output level at 0 dBFS @ -10 dBV: +2 dBV
- Power supply via flat cable
- Standard bracket, board dimensions: 90 x 95 mm
Condition | New |
---|---|
SKU | RME-AO4S-192AIO |
UPC | 4260123362560 |