This product has been discontinued.

We have discontinued this product permanently. Please find alternative products from below section.

Rode AI-1 Complete Studio Kit with NT1 Microphone, Audio Interface, Shockmount, and Cables

Rating:
100 % of 100
SKU
RODE-NT1-AI1
Rode AI-1 Complete Studio Kit with NT1 Microphone, Audio Interface, Shockmount, and Cables Rode AI-1 Complete Studio Kit with NT1 Microphone, Audio Interface, Shockmount, and Cables Rode AI-1 Complete Studio Kit with NT1 Microphone, Audio Interface, Shockmount, and Cables Rode AI-1 Complete Studio Kit with NT1 Microphone, Audio Interface, Shockmount, and Cables Rode AI-1 Complete Studio Kit with NT1 Microphone, Audio Interface, Shockmount, and Cables
Rode AI-1 Complete Studio Kit with NT1 Microphone, Audio Interface, Shockmount, and Cables

Rode AI-1 Complete Studio Kit with NT1 Microphone, Audio Interface, Shockmount, and Cables

RØDE’s AI-1 Audio Interface is stacked with incredible technology to ensure recording on your computer is easy, versatile and sounds superb. The Complete Studio Kit comes with the AI-1, RØDE’s peerless NT1 large diaphragm condenser microphone, a shock mount and all cables. Let’s get started.

As for inputs: the AI-1’s got both kinds

The AI-1’s single input is a NeutrikTM Combo Jack, which takes both a 3-pole XLR (common to most microphones) and a quarter-inch jack common to most electric instruments like guitar, bass et al. Layering tracks is as easy as plug in, set level and go.

No cords barred (and other puns)

The Complete Studio Kit comes with the RØDE NT1 studio condenser microphone, a shock mount, pop-shield, RØDE XLR cable and USB-C/A cables to transfer data from your AI-1 to your computer, and power – including 48V phantom power to your AI-1.

Superior Headphone Amplifier onboard

Not only does the AI-1 deliver crystal clear audio to your computer software, but headphones have never sounded sweeter thanks to the discrete studio-quality headphone output and level control.

  • Computer Connectivity: USB
  • Form Factor: Desktop
  • Simultaneous I/O: 1 x 2
  • Number of Preamps: 1
  • Phantom Power: Yes
  • Bit Depth: 24-bit
  • Sample Rates: 44.1 kHz,48 kHz,88.2 kHz,96 kHz
  • Analog Inputs: 1 x Neutrik XLR-1/4” combo
  • Analog Outputs: 2 x 1/4” (impedance balanced),1 x 1/4” (headphones) 
  • Direct Monitor: Yes
  • USB: 1 x USB Type C 
  • Bus Powered: Yes 
  • OS Requirements: Mac OS 10.10 or later,Windows 7 or later 
  • Power: USB bus-powered
  • Depth: 100mm total (with knobs)
  • chassis: 88mm
  • Width: 124mm
  • Height: 38mm
  • Weight: 1lb 3.7oz(560g)
XLR/MIC INPUT
  • Dynamic Range: 104dBA
  • Equivalent Input Noise @ Maximum Gain (Source Impedance 150 ohms, 20Hz-20kHz, A-weighted): –128dBA
  • Frequency Response (Measured after ADC): 20Hz – 20kHz better than ±1dB
  • Gain Range: 0dB – >45dB
  • Input Impedance: 1.3k Ohms
INSTRUMENT INPUT
  • Dynamic Range: 99dBA
  • Frequency Response (Measured after ADC): 20Hz – 20kHz better than ±1dB
  • Gain Range: 0dB – >45dB
  • Input Impedance: 900k Ohms
MONITOR OUTPUTS
  • Maximum Output Level: -6dBu
  • Frequency Response: 20Hz – 20kHz better than ±1dB
HEADPHONE
  • Max output power at 1% THD: 32Ohms – >210mW,300Ohms – >390mW
More Information
Condition New
SKU RODE-NT1-AI1
UPC 698813005123
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account