Rode NTG2 Multi-Powered Shotgun Microphone

0 Review(s) | Add Your Review SKU: RODE-NTG-2 |UPC: 698813000470

Availability: Out of stock

Earn points:
Reward Points earn 10 Points for reviewing this product.

  • Condenser transducer

  • Rugged metal construction

  • Two step High Pass Filter (Flat/80Hz)


The RØDE NTG2 is a lightweight condenser shotgun microphone, designed for professional applications within the film, video, television and production industries.

Its full frequency response, low noise and audio transparency make it an ideal film, video, and voice over microphone, while its low weight (161gm/5.7oz without battery) makes it an ideal boom microphone.

In addition to the native 20Hz-20kHz frequency response a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded.

The NTG2 operates either from a AA (1.5V) battery or P48 phantom power which can be supplied by professional cameras, audio recorders and power supplies. The battery power option makes the NTG2 ideal for scenarios where the camera does not supply phantom power such as DSLR video.

The WSVM windshield is supplied to minimise light wind noise and plosives during recording. The optional 'DeadCat' furry is recommended for outdoor applications.

The RØDE NTG2 shotgun microphone is designed and made in Australia, and covered by RØDE Microphones' industry leading 10 year warranty.



  • Broadcast sound quality

  • Low noise circuitry

  • Condenser transducer

  • Rugged metal construction

  • Two step High Pass Filter (Flat/80Hz)

  • P48 phantom power or AA battery option

  • Low handling noise

  • Low weight - 161g (5.17 oz.)

  • Includes mic clip, wind shield and zip case

  • Ideal for professional applications within the film, video, television and production industries



Additional Information

UPC 698813000470
Weight 2.0000
  • Acoustic Principle: Line Gradient

  • Active Electronics: JFET impedance convertor with balanced transformer output

  • Capsule: 0.50"

  • Polar Pattern: Supercardioid

  • Address Type: End

  • Frequency Range: 20Hz - 20kHz (selected HPF @ 0)

  • Output Impedance: 250Ω

  • Maximum SPL: 131dB SPL (@ 1kHz, 1% THD into 1KΩ load)

  • Maximum Output Level: 6.9dBu (@ 1kHz, 1% THD into 1KΩ load)

  • Sensitivity: -36.0dB re 1 Volt/Pascal (15.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz

  • Equivalent Noise Level (A-weighted): 18dB-A

  • Power Options: AA battery powered; +48v phantom power required from mixer or interface

  • Weight: 161.00gm

  • Dimensions: 280.00mmH x 22.00mmW x 22.00mmD

  • Dimensions: 280.00mmH x 22.00mmW x 22.00mmD

  • Output: 3-pin XLR output

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Use spaces to separate tags. Use single quotes (') for phrases.

You may also be interested in the following product(s)