Tascam DR-701D Linear PCM Field Recorder for DSLR Camera (C-STOCK)

SKU
TCM-DR701D-CSTK
Tascam DR-701D Linear PCM Field Recorder for DSLR Camera (C-STOCK) Tascam DR-701D Linear PCM Field Recorder for DSLR Camera (C-STOCK) Tascam DR-701D Linear PCM Field Recorder for DSLR Camera (C-STOCK)
Tascam DR-701D Linear PCM Field Recorder for DSLR Camera (C-STOCK)
$369.00
Starting at $31/mo with .
Out of stock

The DR-701D is TASCAM's flagship recorder for single-shooter video production. A timecode generator is included for location reference, which can be jam synced from a SMPTE generator, camera, or smart slate. The HDMI in and out allows a DSLR camera to start recording on both devices, and video clock prevents drift between sound and picture.

Four mic inputs can be individually recorded and mixed to a stereo track, for a total of six-track recording. For additional tracks, multiple units can be cascaded together. The lightweight yet rigid chassis is forged from a magnesium alloy. Tripod mounts on the top and bottom of the unit allow the unit to mount under a camera, attach to a follow-focus cage, or used stand-alone.

Designed for the needs of professional filmmakers, television producers, advertisers, and documentarians, the DR-701D packs high quality multitrack recording into a package compact enough for use with any camera.

Features

  • SD/SDHC/SDXC cards used for recording media.
  • 6 maximum simultaneous recording tracks
  • MONO, STEREO, 2MIX, DUAL MONO, DUAL ST and DUAL2MIX recording modes
  • Recording formats: 16/24-bit, 44.1/48/96/192kHz (WAV/BWF) (192kHz only for two-track recording)
  • Built-in original TASCAM HDDA mic preamps provide high audio quality
  • Input levels can be adjusted separately for each track
  • XLR/TRS inputs support +4dBu line level and 24/48V phantom power
  • Clock and record start/stop can be synchronized with a camera using the HDMI port
  • DR-701D audio signal can be output to an external camera or recorder from the HDMI OUT or line output
  • Cascade function using HDMI connections allows multiple DR-701D transport and monitoring operations
  • SMPTE Timecode can be input through the TC IN connector to add recording start times to files
  • Timecode generator (RTC) allows recording start times to be added to files even when there is no timecode input
  • Plug-in power mics and high output mics (EXT IN 1/2) supported
  • OUT (CAMERA OUT) connector can output audio mixed by the DR-701D to a DSLR camera
  • IN (CAMERA IN) connector enables monitoring the sound from a DSLR camera through the DR-701D
  • High quality audio output through a line output jack separate from the headphones jack
  • Headphones jack with 50mW+50mW maximum output
  • Tripod attachment threads (bottom), camera screw attachment that can be installed or removed with a coin (top) and shoe mount (top) included
  • Handles on the left and right sides of the front protect the control surface and also enable attachment of a shoulder strap
  • Transport and SLATE buttons made of rubber suppress noise during operation
  • HOLD switch prevents misoperation
  • 128×64-dot graphic LCD with backlight
  • LED lights have high visibility even in direct sunlight
  • High-speed transfer of files to computers possible using USB 2.0
  • Micro-B type USB cable included
  • Powered by 4 AA batteries, USB bus power or a PS-P515U AC adapter (sold separately)
  • BP-6AA external battery pack (sold separately) enables operation for even longer times
  • Optional RC-3F foot switch and RC-10 wireless remote control can be connected (both sold separately)
  • Built-in mixer enables pan and level adjustments as well as solo monitoring and can output a mix of 4 channels
  • GANG function allows the levels of multiple channels to be controlled simultaneously
  • Individual channel trim settings shown
  • 5-position low-cut filter (50/80/120/180/220 Hz) cuts unwanted low frequencies
  • Multiband limiter automatically adjusts input overloads (stereo-linking possible with 1/L and 2/R)
  • Delay function can compensate for distances between mics (+/-150 ms)
  • Mid-side decoder function enables use with mid-side stereo mics
  • Slate tone insertion functions (AUTO/MANUAL)
  • Slate tone insertion points can be selected (recording start or recording start and stop when slate AUTO function used)
  • Recording media: SD card(64MB to 2GB), SDHC card(4GB to 32GB), SDXC card(48GB to 128GB)
  • Recording format
    • WAV: 44.1k/48k/96k/192k Hz, 16/24-bit
    • BWF: 44.1k/48k/96k/192k Hz, 16/24-bit
  • Number of input channels
    • 44.1k/48k/96k Hz: 4 maximum
    • 192kHz: 2 maximum
  • Number of recording tracks
    • 44.1k/48k/96k Hz: 6 maximum
    • 192kHz: 2 maximum
  • Analog audio inputs: *The maximum input level the level that the input knob can be adjusted and a digital full-scale(0dBFS) signal can be input without distorting.
  • *The minimum input level is the level that the input knob can be adjusted and a -20dBFS signal can be input.
  • IN 1, IN 2, IN 3, IN 4: XLR can provide phantom power
  • Connectors
    • XLR-3-31 (1:GND, 2:HOT, 3:COLD)
    • 6.3mm(1/4")standard TRS jacks(tip:HOT, Ring:COLD, Sleeve:GND)
  • Input gain: ”LOW”/”MID”/”HI”/”HI+
  • Input impedance: 2k ohms
  • Phantom power: 48V +/-4V(10mA/CH), 24V +/-4V(10mA/CH)
  • Maximum input level: +4dBu
  • Minimum input level: -72dBu
  • MIC input gain: TRIM MAX
  • LOW: +20dB
  • MID: +40dB
  • HI: +52dB
  • HI+: +64dB
  • Input gain: LINE
  • Input impedance: 10k ohms
  • Nominal input level: +4dBu
  • Maximum input level: +24dBu
  • EXT IN 1/2
    • Connector: 3.5mm(1/8")stereo mini jack (can provide plug-in power)
    • Input impedance: 10k ohms
    • Maximum input level: +10dBV
    • Minimum input level: -50dBV
    • MIC input gain: TRIM MAX
    • LOW: +3dB
    • MID: +11dB
    • HI: +26dB
    • HI+: +38dB
  • IN
    • Connector: 3.5mm(1/8")stereo mini jack
    • Input impedance: 10k ohms
    • Nominal input level: -10dBV
    • Maximum input level: +6dBV
    • Analog audio outputs
  • LINE OUT
    • Connector: 3.5mm(1/8")stereo mini jack
    • Output impedance: 200 ohms
    • Nominal output level: -14dBV
    • Maximum output level: +6dBV
  • OUT
    • Connector: 3.5mm(1/8")stereo mini jack
    • Output impedance: 200 ohms
    • Nominal output level: -44dBV
    • Maximum output level: +6dBV
  • PHONES
    • Connector: 3.5mm(1/8")stereo mini jack
    • Maximum output: 50mW + 50mW
    • Control inputs/outputs:
  • HDMI IN/OUT:
    • Connectors: Type A receptacle
  • USB
    • Connector: Micro-B
    • Format: USB2.0 HIGH SPEED mass storage class
  • TIMECODE IN
    • Connector: BNCConnector
    • Signal voltage amplitude: 0.5Vp-p to 5Vp-p
    • Input impedance: 10k ohms
    • Format: SMPTE 12M-1999 compliant
  • REMOTE
    • Connector: 2.5mm TRS jack
    • Power: 4 AA batteries(Alkaline, NI-MH or lithium),
    • AC adapter(TASCAM PS-P515U, sold separately),
    • External battery pack(TASCAM BP-6AA, sold separately)
    • Power consumption: 6.5W(maximum)
    • Current consumption (USB bus power): 1.3A(maximum)
    • Battery operation time (continuous operation): 2ch WAV, 48kHz, 16bit rec
  • *When using phantom power, the operation time might be reduced depending on the mic being used.
  • DR-701D
  • Lithium(Energizer ULTIMATE LITHIUM)
    • About 7:30 : Built-in mic used for 3/4ch, Phantom power unused,HDMI not connected
    • About 6:30 : 1/2ch used, 3mA phantom power used for 2ch, HDMI not connected
    • About 3:30 : 1/2ch used, 3mA phantom power used for 2ch, HDMI input connected(1080/60i)
  • NI-MH batteries(eneloop)
    • About 4:00 : Built-in mic used for 3/4ch, Phantom power unused,HDMI not connected
    • About 2:30 : 1/2ch used, 3mA phantom power used for 2ch, HDMI not connected
    • About 2:00 : 1/2ch used, 3mA phantom power used for 2ch, HDMI input connected(1080/60i)
  • Alkaline batteries (EVOLTA)
    • About 3:45 : Built-in mic used for 3/4ch, Phantom power unused,HDMI not connected
    • About 2:00 : 1/2ch used, 3mA phantom power used for 2ch, HDMI not connected
    • About 1:30 : 1/2ch used, 3mA phantom power used for 2ch, HDMI input connected(1080/60i)
  • DR-701D + BP-6AA: *BP-6AA is using the alkaline batteries (EVOLTA).
  • Lithium batteries (Energizer ULTIMATE LITHIUM)
    • About 12:30 : Built-in mic used for 3/4ch, Phantom power unused,HDMI not connected
    • About 7:30 : 1/2ch used, 3mA phantom power used for 2ch, HDMI not connected
    • About 5:30 : 1/2ch used, 3mA phantom power used for 2ch, HDMI input connected(1080/60i)
  • NI-MH batteries(eneloop)
    • About 9:30 : Built-in mic used for 3/4ch, Phantom power unused,HDMI not connected
    • About 7:00 : 1/2ch used, 3mA phantom power used for 2ch, HDMI not connected
    • About 4:00 : 1/2ch used, 3mA phantom power used for 2ch, HDMI input connected(1080/60i)
  • Alkaline batteries(EVOLTA)
    • About 9:00 : Built-in mic used for 3/4ch, Phantom power unused,HDMI not connected
    • About 6:30 : 1/2ch used, 3mA phantom power used for 2ch, HDMI not connected
    • About 3:45 : 1/2ch used, 3mA phantom power used for 2ch, HDMI input connected(1080/60i)
  • Dimensions: 169(W)×57.3(H)×113.5(D)mm (with the top adapter attached)
  • Weight: 654g (including batteries) / 567g (without batteries)
  • Operating temperature: 0°C to 40°C
  • Standard accessories: USB cable, Camera attachment bracket screw hole covers × 6 Owner's Manual (including warranty)
  • Audio performance
  • Frequency response
    • 20-20kHz +0.5/-1dB(LINE IN to LINE OUT, Fs48kHz, JEITA)
    • 20-40kHz +0.5/-1dB(LINE IN to LINE OUT, Fs96kHz, JEITA)
    • 20-80kHz +0.5/-5dB(LINE IN to LINE OUT, Fs192kHz, JEITA)
  • Distortion: 0.007% or less(MIC IN to LINE OUT Fs44.1k/48k/96k/192k Hz, JEITA)
  • S/N ratio: 100dB or more
  • (MIC IN to LINE OUT, -10dBu??, 1kHz, Fs44.1k/48k/96k/192k Hz, JEITA)
  • Equivalent input noise: -124dBu or less
More Information
Condition C-Stock
SKU TCM-DR701D-CSTK
UPC 4157329284
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account