Tascam UH-7000 High-End USB Audio Interface

Availability: Out of stock

Tascam UH-7000 High-End USB Audio Interface

SKU
TCM-UH-7000
$399.99
Earning 399 points for this item
Applies only to registered customers, may vary when logged in.
Availability: Out of stock
Earn 10 points for writing a review for this product
UH-7000 UH-7000 front UH-7000 back
UH-7000

The UH-7000 is a pro-level microphone preamp and audio interface designed with a strong focus on low noise and high audio quality. Not only can this unit be used as a 4-in/4-out audio interface in a DAW production environment, but as a standalone microphone preamp and A/D / D/A converter. The built-in HDIA (High Definition Instrumentation Architecture) microphone preamps are newly designed and perform at −128 dBu equivalent input noise, a signal-to-noise ratio of 117 dB and distortion of 0.0009 % or less.

The grand nature of the UH-7000’s sound is partially due to the careful attention spent on selecting parts. In addition to Burr-Brown converters and metal thin-film resistors, installed is a powerful TCXO clock generator with a precision of ±1 ppm.

The unit’s half-rack size makes it easy to install at a studio console or work desk. The thick aluminum panels used on the front and sides of the full-metal body help increase stability. Highly important but easily forgotten about are the smooth-tension aluminum input level knobs for precise level adjustments.

The UH-7000 microphone preamp and audio interface enables composers, musicians and recording engineers to produce music in their private quarters at a level generally reached only in professional studios.

Features

  • Top-of-the-line two-channel USB audio interface for Windows and Macintosh computers

  • Can be used as a stand-alone high-end AD converter for monitoring or recording to stand-alone recorders

  • High-performance mic preamp newly designed for this model reduces influence of impedance mismatch with high accuracy resulting in most accurate audio reproduction at the input stage

  • Superb audio quality with samling rates up to 192 kHz at 24-bit resolution

  • Ultra-high dynamic range of 123 dB (A/D) and 128 dB (D/A)

  • Professional-grade PCM4220 A/D and D/A converters from Texas Instruments

  • Selected components like metal film resistors and film capacitors for outstanding sound quality with noise and distortion minimized to a minimum

  • High-precision clock synchronization with sample-accuracy at both recording and playback

  • On-board DSP mixer and effects like EQ, compressor, noise suppressor, de-esser, exciter and reverb (effects up to 96 kHz only)

  • Two selectable mixer modes:

    • Multi Track mode for DAW recording and composing: Create a monitor mix independent of the actual recording levels

    • Stereo Mix mode for internet broadcasting and video editing: Create a stereo mix of two different sources plus loop-back signal from the computer

  • Mixer panel for intuitive mixing and effects handling on the computer screen

  • Dedicated button for opening/closing the mixer panel on the computer

  • Two large TRIM knobs for precise level adjustment

  • XLR and TRS balanced analogue inputs

  • Switchable 48-V phantom power on XLR inputs

  • XLR balanced line outputs

  • Line output level can optionally be adjusted with the headphones level control

  • Output selector allows a source to be output via the unit's mixer or via a computer connected by USB

  • Powerful headphones output with dedicated level control

  • AES/EBU digital I/O

  • Low-latency monitoring

  • Easy-to-read 20-dot LED level meter

  • Aluminum front and side panels for long durability even under tour conditions

  • Half-rack size

  • Audio resolution

  • Sampling frequencies: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz

  • Quantization bit depth: 24-bit

  • Analogue audio inputs and outputs

  • Line inputs (ANALOG (BALANCED) LINE IN 1/2): 6.3-mm standard TRS jacks

  • Input impedance: 15 kOhm

  • Maximum input level: +26.5 dBu

  • Minimum input level: −38 dBu

  • Mic inputs (ANALOG (BALANCED) MIC IN 1/2): XLR-3-31 equivalent

  • Input impedance: 2.2 kOhm

  • Maximum input level: +2 dBu

  • Minimum input level: −60 dBu

  • Line outputs (ANALOG (BALANCED) OUTPUT L/R): XLR-3-32 equivalent

  • Output impedance: 100 Ohm

  • Maximum output level (INPUT knob at minimum): +24 dBu

  • Headphones output (PHONES): 6.3-mm standard stereo jack

  • Maximum output power: 45 mW + 45 mW or higher (THD+N: 1% or less, 32 Ohm load)

  • Digital audio inputs and outputs

  • DIGITAL (AES/EBU) IN: XLR-3-31 equivalent

  • Formats: 

    • IEC 60958-3 (S/PDIF)

    • IEC 60958 for pro use (AES/EBU)

  • Sampling frequencies: 

    • ×1: 44.1 kHz, 48 kHz

    • ×2: 88.2 kHz, 96 kHz

    • ×4: 176.4 kHz, 192 kHz

  • DIGITAL (AES/EBU) OUT: XLR-3-32 equivalent

  • Formats: 

    • IEC 60958-3 (S/PDIF)

    • IEC 60958 for pro use (AES/EBU)

  • Sampling frequencies: 

    • ×1: 44.1 kHz, 48 kHz

    • ×2: 88.2 kHz, 96 kHz

    • ×4: 176.4 kHz, 192 kHz

  • Other inputs and outputs

  • USB: 4-pin USB B-type

  • Transfer rate: USB 2.0 High Speed (480 Mbit/s), Full Speed (12 Mbit/s)

  • Audio performance

  • Equivalent input noise (EIN): –128 dBu (unweighted, 60 dB, 40 Ohm)

  • ADC dynamic range: 123 dB (A-weighted)

  • DAC dynamic range: 123 dB (A-weighted)

  • Frequency response, Mic preamp: 20 Hz – 80 kHz, +0.005 dB/−0.16 dB (all Fs)

  • S/N ratio: 117 dB (MIC to AD)

  • Distortion: 0.0009 % (MIC to AD)

  • Power supply and other specifications

  • Power supply: AC 100–240 V, 50/60 Hz

  • Power consumption: 15 W

  • Dimensions (W × H × D): 214 mm × 81 mm × 233 mm

  • Weight: 2.2 kg

  • Operating temperature range: 5–35 °C


More Information
Condition New
SKU TCM-UH-7000
UPC 043774030170
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
We found other products you might like!