Rode NTG-2 Shotgun Mic with Blimp Wind Shield/ Shock Mount System, KE-89CC Boom, and 15 ft Mogami Cable

Rode NTG2 Multi-Powered Shotgun Microphone

The RØDE NTG2 is a lightweight condenser shotgun microphone, designed for professional applications within the film, video, television and production industries.

Its full frequency response, low noise and audio transparency make it an ideal film, video, and voice over microphone, while its low weight (161gm/5.7oz without battery) makes it an ideal boom microphone.

In addition to the native 20Hz-20kHz frequency response a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded.

The NTG2 operates either from a AA (1.5V) battery or P48 phantom power which can be supplied by professional cameras, audio recorders and power supplies. The battery power option makes the NTG2 ideal for scenarios where the camera does not supply phantom power such as DSLR video.

The WSVM windshield is supplied to minimise light wind noise and plosives during recording. The optional 'DeadCat' furry is recommended for outdoor applications.

The RØDE NTG2 shotgun microphone is designed and made in Australia, and covered by RØDE Microphones' industry leading 10 year warranty.

• Broadcast sound quality
• Low noise circuitry
• Condenser transducer
• Rugged metal construction
• Two step High Pass Filter (Flat/80Hz)
• P48 phantom power or AA battery option
• Low handling noise
• Low weight - 161g (5.17 oz.)
• Includes mic clip, wind sheild and zip case
• Ideal for professional applications within the film, video, television and production industries

Rode Blimp Wind Shield and Shock Mount System

The RØDE Blimp is a complete windshield and shock mounting accessory for the NTG1, NTG2 and NTG3 microphones, as well as any third party shotgun microphone up to 325mm (12 ¾”) in length.

Now featuring the Rycote® Lyre suspension system, the Blimp provides the ultimate in microphone suspension and isolation. Constructed from a single piece of hard-wearing thermoplastic, the Lyre provides superior acoustic suspension to traditional elastic solutions, and will never wear out, sag or snap.

The Blimp’s handle has also been completely redesigned, reducing the product weight significantly, while increasing the ergonomics for handheld use. Housed inside the grip is a heavy-duty Mogami cable which splits via a junction box to a highly-flexible thin cable inside the Blimp, to minimise the transference of vibration to the microphone.

With the lightweight design of the handle and suspension system the new Blimp design is over 25% lighter (550gm without microphone or DeadWombat fitted).

The Blimp attaches to any standard boompole via 3/8" thread attachment at the base. The Universal Blimp Mount is available as an option to remove the handle when the Blimp is being used primarily on a boompole to reduce weight.

The Dead Wombat windshield, caring brush and tail/patch cable are included.

The added confidence of a full ten year warranty* ensures that the Blimp is by far the best microphone windshield system available, further evidenced by a 2009 Red Dot Award and Australian International Design Award for outstanding product design.

*Excludes normal wear and tear of Dead Wombat furry cover or any misuse, modification or improper storage and transportation of the product.

K-Tek KE-89CC Avalon Series Aluminum Boompole with Internal XLR Cable KE89CC

The K-Tek KE-89CC Avalon Series Aluminum Boompole provides a moderately priced, lightweight boompole solution for ENG, EFP and other field recording applications. Its sturdy aluminum design is tough enough to endure the rigors of road use while remaining lightweight and travel worthy. This pole features an internally coiled cable and XLR connection at the base of the pole. A total of 4 aluminum sections telescope between 2' 5"-7' 2" (0.76-2.19m) and will easily store in any standard equipment case. The captive-collet coupling system lock each section in place for even further reliability.

Features

• Internally coiled XLR cable and connection at the base

• The KE-89CC features a bottom-mounted 3-pin XLR connection

• Designed to fit in any standard equipment case, for ENG, EFP and DV location production work

• Jam-resistant collar coupling

• Unique pole top design with cable retention slots and replaceable stailess steel mounting stud

Mogami Gold Studio Mic XLR Male to Female 15ft Microphone Cable

This Mogami Gold Studio XLR Microphone Cable is a high quality microphone cable for studio use utilizing Neglex Studio Quad #2534 cabling for better clarity and diminished noise and RF interference. This cable is terminated with black body 3-pin XLR connectors and gold contacts.

Neglex type Quad Cables have been developed for the highest quality recording applications where maximum definition of recorded sound is of critical importance. Special proprietary materials & construction methods make those state-of-the-art mic cables a must for direct to DISC and digital recording. Basic matters of flexibility, microphonics and shielding effect have been designed to meet international professional requirements.

• Neglex quad microphone cable helps alleviate RFI interference problems

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer, reproductive, and developmental harm. For more information, visit www.p65warnings.ca.gov