This product has been discontinued.

We have discontinued this product permanently. Please find alternative products from below section.

Sennheiser MKH416 P48 Shotgun Mic with Blimp Wind Shield/ Shock Mount System, KE-89CC Boom, and 15 ft Mogami Cable

SKU
BU-MKH416-BLIMP-CABLE-89CC

Sennheiser MKH416 P48 Condenser Mic Shotgun Microphone TV Film Recording MKH 416

The venerable MKH 416 is a compact pressure-gradient microphone with short interference tube, highly immune to humidity due to its RF condenser design. Featuring high directivity, low self noise, high consonant articulation and feedback rejection, the MKH 416 can handle difficult exterior filming and reporting conditions without any difficulty. Supercardioid/lobe pattern, matte black finish, supplied with the MZW415 windscreen

Features

  • Pressure gradient receiver with short interference tube

  • Hypercardioid at low and medium frequency

  • Above 2kHz approaches lobar pattern

 

Rode Blimp Wind Shield and Shock Mount System

The RØDE Blimp is a complete windshield and shock mounting accessory for the NTG1, NTG2 and NTG3 microphones, as well as any third party shotgun microphone up to 325mm (12 ¾”) in length.

Now featuring the Rycote® Lyre suspension system, the Blimp provides the ultimate in microphone suspension and isolation. Constructed from a single piece of hard-wearing thermoplastic, the Lyre provides superior acoustic suspension to traditional elastic solutions, and will never wear out, sag or snap.

The Blimp’s handle has also been completely redesigned, reducing the product weight significantly, while increasing the ergonomics for handheld use. Housed inside the grip is a heavy-duty Mogami cable which splits via a junction box to a highly-flexible thin cable inside the Blimp, to minimise the transference of vibration to the microphone.

With the lightweight design of the handle and suspension system the new Blimp design is over 25% lighter (550gm without microphone or DeadWombat fitted).

The Blimp attaches to any standard boompole via 3/8" thread attachment at the base. The Universal Blimp Mount is available as an option to remove the handle when the Blimp is being used primarily on a boompole to reduce weight.

The Dead Wombat windshield, caring brush and tail/patch cable are included.

The added confidence of a full ten year warranty* ensures that the Blimp is by far the best microphone windshield system available, further evidenced by a 2009 Red Dot Award and Australian International Design Award for outstanding product design.

*Excludes normal wear and tear of Dead Wombat furry cover or any misuse, modification or improper storage and transportation of the product.

 

K-Tek KE-89CC Avalon Series Aluminum Boompole with Internal XLR Cable KE89CC

The K-Tek KE-89CC Avalon Series Aluminum Boompole provides a moderately priced, lightweight boompole solution for ENG, EFP and other field recording applications. Its sturdy aluminum design is tough enough to endure the rigors of road use while remaining lightweight and travel worthy. This pole features an internally coiled cable and XLR connection at the base of the pole. A total of 4 aluminum sections telescope between 2' 5"-7' 2" (0.76-2.19m) and will easily store in any standard equipment case. The captive-collet coupling system lock each section in place for even further reliability.

Features

  • Internally coiled XLR cable and connection at the base

  • The KE-89CC features a bottom-mounted 3-pin XLR connection

  • Designed to fit in any standard equipment case, for ENG, EFP and DV location production work

  • Jam-resistant collar coupling

  • Unique pole top design with cable retention slots and replaceable stailess steel mounting stud

 

Mogami Gold Studio Mic XLR Male to Female 15ft Microphone Cable

This Mogami Gold Studio XLR Microphone Cable is a high quality microphone cable for studio use utilizing Neglex Studio Quad #2534 cabling for better clarity and diminished noise and RF interference. This cable is terminated with black body 3-pin XLR connectors and gold contacts.

Neglex type Quad Cables have been developed for the highest quality recording applications where maximum definition of recorded sound is of critical importance. Special proprietary materials & construction methods make those state-of-the-art mic cables a must for direct to DISC and digital recording. Basic matters of flexibility, microphonics and shielding effect have been designed to meet international professional requirements.

  • Neglex quad microphone cable helps alleviate RFI interference problems

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer, reproductive, and developmental harm. For more information, visit www.p65warnings.ca.gov

Sennheiser MKH416 P48 Condenser Mic Shotgun Microphone TV Film Recording MKH 416

  • Dimensions: Ø 19 x 250 mm

  • Frequency response (microphone): 40.....20000 Hz

  • Sensitivity in free field, no load (1kHz): 25 mV/Pa +- 1 dB

  • Nominal impedance: 25 Ohm

  • Min. terminating impedance: 800 Ohm

  • Equivalent noise level: 13 dB

  • Equivalent noise level weighted as per CCIR 468-3: 24 dB

  • Maximum sound pressure level (passiv): 130 dB

  • Current consumption: 2 mA

  • Voltage: 48 +- 4 V Phantom

 

Rode Blimp Wind Shield and Shock Mount System

  • Weight: 550gm

  • Dimensions: 285.00mmH x 490.00mmW x 125.00mmD

 

K-Tek KE-89CC Avalon Series Aluminum Boompole with Internal XLR Cable KE89CC

  • Material: Aluminum

  • Sections: 4

  • Length: 2' 5"-7' 2" (0.76-2.19m)

  • Weight: 1.11 lbs (0.50kg)

  • Load Capacity: Not Specified By Manufacturer

 

Mogami Gold Studio Mic XLR Male to Female 15ft Microphone Cable

  • Cable Type: XLR microphone cable
  • Length: 15' (4.5m)
  • Gauge: 4 x 24 AWG
  • Shielding: 100% spiral shield
  • Connector 1: 3-Pin XLR male
  • Connector 2: 3-Pin XLR female

 

 

 

More Information
Condition New
SKU BU-MKH416-BLIMP-CABLE-89CC
UPC 7011587033
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account