Adam A7V 7-Inch Active Studio Monitor Speaker Pair w/ Focusrite Scarlett 2i2 & Cables

SKU
BU-ADAM-A7V-1
was $1,808.87 Special Price $1,779.99
SAVE $28.88
Out of stock
Adam A7V 7-Inch Active Studio Monitor Speaker Pair w/ Focusrite Scarlett 2i2 & Cables
Adam A7V 7-Inch Active Studio Monitor Speaker Pair w/ Focusrite Scarlett 2i2 & Cables

Adam A7V 7-Inch Active Studio Monitor Speaker w/ Rotatable X-ART Tweeter

The A Series A7V speaker represents the evolution of ADAM Audio’s best-selling, award-winning A7X. The two-way A7V combines a new 7-inch woofer built from Multi-Layer Mineral (MLM) fibers and ADAM Audio’s handmade precision X-ART tweeter to deliver a wide frequency range of 41 Hz to 42 kHz. Rotatable HPS waveguide technology and onboard DSP-based tuning options enable you to optimize the sound of the A7V for your precise room requirements and sonic preferences. For many artists, mixers, and producers, the A7V will be the sweet spot in the A Series line.

Rotatable HPS Waveguide & X-ART Tweeter 

ADAM Audio HPS (high-frequency propagation system) waveguide technology enables tweeters to disperse sound with controlled consistency, broad in the horizontal axis but tightly focused in the vertical plane. The A Series introduces a rotatable HPS waveguide design. You can shift A Series tweeters in 90-degree steps to continue to benefit from HPS waveguide technology whether you position the speakers horizontally or vertically.

The A Series HPS Waveguide is made from a new glass fiber polymer compound that helps create a clear sound, free of unwanted resonance. The ADAM Audio X-ART tweeter is at the heart of the rotatable HPS waveguide. Handmade in Germany, the X-ART tweeter provides a precise transient response and reproduces the finest sonic details. This X-ART tweeter is used in every A Series speaker, providing a detailed, consistent sound across the product line. 

Multi-Layer Mineral Woofer 

A Series woofers are constructed with a unique blend of mineral stone fibers that have been baked together to create a lightweight but highly stable material. The mineral composition, layering and geometry of each cone is specific to the driver used in each model. By combining this material with a new magnet system, A Series woofers produce high output with low distortion, delivering a clean low-end.

Hybrid Amplification  

The A Series combines the best of both digital and analogue worlds. The woofers are driven by Class D amplifiers that help produce linear performance while reducing distortion. These amplifiers were chosen specifically for their power and efficiency, in terms of both energy consumption and sound reproduction. Low thermal dissipation allows for a smaller heat sink, which facilitated additional investment in the exceptional power and performance of the A Series. 

Tweeters and midrange drivers are powered by Class AB amplifiers which offer a smooth, natural reproduction of high frequencies. Each amplifier is optimized for its working range, resulting in a fine-tuned, properly aligned speaker. To reach this point, ADAM Audio carried out extensive measurements and listening sessions, trialing countless amplifiers and amplifier components.

DSP-Based Electronics 

The A Series capitalizes on the transformative power of DSP-based electronics to provide greater tuning precision and better predictability than analogue-only speakers. With firmware that can be updated through an Ethernet connection, over time you can expect to integrate the latest DSP-based capabilities from ADAM Audio—including new filter types and features, plus alternative voicings. 

Room Adaptation 

On the back panel of A Series speakers, you will find four bands of room adaptation equalization: Bass, Desk, Presence and Treble. Each band is adjustable in predefined steps, offering more than 100 tuning options to help compensate for the typical acoustic problems that arise from speaker placement.

Voicings 

A “Voicing” is a pre-defined sound profile of the A Series monitors. On the back panel, you will find two different selections, “UNR” and “Pure”. Here you will also find the “Ext” option which is dedicated to the extended functionality that comes with A Control via the Ethernet connection. 

“UNR” or “Uniform Natural Response™” is a dynamic, natural-sounding response curve of ADAM Audio’s own design, which stems from a variety of iconic ADAM Audio legacy products, including the preceding AX Series. It lends itself to production, composition and song writing as its engaging and present sound can give you more room for creativity and flow. It is also a great option whenever you want to use your speakers simply to enjoy some good music. 

“Pure” is a highly accurate and neutral sounding option. This is the “flat” setting, ideal for mixing and mastering, where you really must be aware of all the details and rely on an honest representation from your speakers. 

The “Ext” option is dedicated to the extended functionality that comes with A Control via the Ethernet connection. Using A Control’s six-band EQ, a custom voicing and be created and pushed to the monitor.

A Control (Real-Time Remote Control) 

The DSP-based functionality of all A Series monitors can be controlled remotely and in real time over Ethernet using the free to download A Control software. A Control is available to download for Windows and MacOS in the MyADAM area of www.adam-audio.com for customers who have registered their A Series monitors.  

Once downloaded and installed, you can control multiple speakers at once, precisely adjusting equalization and delay settings from various listening positions in your studio space. While you work, you can remotely control monitor levels if you’re far from a fader or physical interface. Remote-control capabilities are particularly useful in multi-purpose rooms allowing you to make sure that voicing, EQ, and other settings are all exactly how you want them. 

Room Correction & Sonarworks Integration 

A Series speakers are designed to be adaptable to changing requirements, preferences, and environments. Using the A Control software, you can push advanced filters directly to an embedded platform onboard the monitors to help compensate for imperfect room acoustics. This embedded platform supports filters from industry leading third-party Sonarworks. Using Sonarworks software and a measurement mic, you can calibrate your speakers for a new room or shifting taste.

Bass Reflex System, Cabinets and Mounting 

The new A Series cabinets build on the heritage of ADAM Audio and the AX Series in particular. In an evolutionary design, A Series cabinets have deeper beveling to further reduce diffraction. In addition, thicker baffle walls strengthen the cabinets and reduce internal vibrations, while a flared-port design optimizes airflow and reduces port noise. All A Series speakers include an underside mounting interface, giving you the flexibility to mount them wherever you need them.

A Solution for Every Space 

With five models of varying dimensions and specifications to choose from, finding the right speaker is simply a matter of taste and understanding the acoustic requirements of your space. For added flexibility when it comes to speaker positioning, the rotatable HPS waveguide means each speaker can be used in a horizontal or vertical position with minimal compromise in sound quality. Room adaptation options directly on the backplate of the monitor help address common speaker placement issues such as bass overrepresentation caused by nearby walls and surfaces.

Superior Audio Performance 

Every aspect of the A Series’ design, material, and components contributes toward exceptional sound quality and improved output when comparing similar models of the preceding AX Series.

The combination of Class D amplifiers used in A Series woofers, and the Class AB amplifiers found in the tweeters deliver impressive SPL across the range and an ultra-low frequency response. The use of digital signal processing enables the more advanced features found in the A Series.

All A Series speakers come equipped with an X-ART tweeter enclosed in a tailor made HPS waveguide. The high quality of the tweeter materials, folded by hand in Berlin, combined with the precise propagation control of the waveguide, results in superior dispersion of high frequencies over short and long listening distances. 

A Series woofers are constructed from multiple layers of mineral stone fibers baked together to create a lightweight but highly stable material that helps eliminate partial vibrations and other sonic impurities. By combining that material with a new magnet system, A Series woofers produce high output with low distortion, delivering a clean sound for low-end material. 

The elegant design of A Series cabinets also contributes toward superior audio performance. Specifically, the cabinets have deeper beveling to minimize diffraction, and thicker baffle walls that reduce vibrations within the enclosure. In addition, a flared-port design reduces port noise compared with AX Series speakers by optimizing airflow.

Truthful Mixing 

The A Series features 2 selectable voicing options found directly on the back panel of the monitors. “Pure” is a highly accurate and neutral sounding option. This is a super flat setting, offering an honest representation from your speakers and making it ideal for mixing, mastering and critical listening applications.

Characterful Sound  

The A Series also offers the characterful and present sound you would expect from ADAM Audio. “UNR” or “Uniform Natural Response™” is a dynamic, natural-sounding voicing that is selectable on the back panel of the monitors. Its design stems from a variety of iconic ADAM Audio legacy products, including the preceding AX Series. It lends itself to production, composition and song writing as its engaging sound can give you more room for creativity and flow. It is also a great option whenever you want to use your speakers simply to enjoy some good music.

Can’t Treat Your Space? Compensate for it. 

For many people, acoustic treatment is not an option due to the cost and complexity involved or because they use their speakers in a living room or bedroom. The A Series offers several solutions to address poor room acoustics, from room adaptation equalization to deal with unavoidable nearby objects, to automated room correction available through the Sonarworks collaboration. Together these technologies can greatly improve the listening experience without the need for costly alterations to your space.

Save Space with Mounting Options 

The A Series cabinets were designed with mounting in mind. All models feature four M8 threaded screw holes (10 mm depth) in a rectangular pattern of 127 mm x 70 mm.

Stay in the Zone with Remote Operation 

Much of the embedded technologies found in the A Series can be controlled remotely and in real time via the A Control software application. This means you can focus on your project and monitor adjustments from your listening position without the need to reach behind the speakers to adjust.

Future Proof Feature Set  

Software and firmware played an important role in the development of the A Series and will continue to long after the launch of the speakers. Via the Ethernet connection you can expect to integrate the latest DSP-based capabilities from ADAM Audio, including new filter types and features, plus alternative voicings, meaning your A Series monitors will continue to deliver the best sound possible for many years to come.

Beyond Stereo Applications  

The A Series features a variety of input options, mounting possibilities, and sound adjustability, making it suitable for multichannel and surround applications.

Free Up Processing Power 

For the past 3 years, ADAM Audio and Sonarworks have worked side-by-side to deliver an innovative integration running directly on A Series monitors. This negates the need for an additional DAW plugin, simplifying workflows and ensuring that your studio monitors are always optimally tuned, regardless of the audio source or type.

What’s In The Box

  • 1 x Loudspeaker
  • 1 x Power cable
  • 1 x Quick start guide


Focusrite Scarlett 2i2 3rd Gen USB 2.0 Audio Interface 2 Inputs 192kHz

The essential audio interface.

Scarlett has gone platinum. Sitting on the desks of a huge global community of musicians, producers and home-recordists, the iconic 2i2 has already helped make more records than any other interface in history. And with the 3rd Generation, you’re going to sound better than ever.

Two of the best performing Scarlett mic preamps the range has ever heard – now with Air – for miking up guitars or recording vocals

Two high headroom instrument inputs, for plugging your guitar or bass straight in

High-performance converters, allowing you to record, mix and play back audio in studio quality, anywhere

Easy Start tool, making it easier than ever to get up and running

Your music, write away

Scarlett’s best-selling interface – millions of musicians use 2i2 to write and record every day. Featuring natural sounding 3rd Gen mic preamps, and Air, emulating our original ISA preamps, 2i2 is getting musicians the most from their mics everywhere, all the time. It’s like writing in a studio.

The best sounding, easily

Getting studio quality recordings at home has never been easier. Easy Start gets you set up, recording and playing back within minutes. Our mic preamps, high-headroom instrument inputs and now-iconic Gain Halos mean the science of sounding great is sorted. We’ve worried about the tech, you can focus on the music.

Your recording is 30 years in the making

We’ve been making mic preamps for 30 years, and the 3rd Gen mic pre is the best Scarlett has ever heard. The 24-bit/192kHz converters give your recordings clarity and detail. Air mode breathes life into vocals, adding unique high-end detail. Our decades of experience mean Scarlett sounds just like you.

OUR TECHNOLOGY IS SOUND

Incredibly reliable, Focusrite hardware won’t let you down. If, however, you come across a problem you can rely on our global support team and your three-year warranty to get it sorted. Sound.

The Focusrite sound: Officially supported on iPad Pro

Scarlett 2i2 is officially supported in use with USB-C iPad Pros. Setup and operation is simple: just plug in, fire up your favourite music-making app, and enjoy the Focusrite sound wherever you go. Scarlett 2i2 has been tested extensively with Garageband, Cubasis 2, Auria Pro, Ampify Launchpad, Ampify Groovebox and Ampify Blocs Wave, as well as FL Studio. Now you can record anywhere, really.

HITMAKER EXPANSION

Create studio quality vocals, powerful guitars, luscious keys and huge drums, then mix and master with iconic Focusrite studio hardware – all in the box. Every new Scarlett 3rd Gen, Clarett and Red interface comes with an unbeatable range of tried-and-tested studio tools from some of the biggest names in the business.

Hitmaker Expansion – available with every Scarlett 3rd Gen, Clarett+, Clarett USB and Red interface purchased and registered on or after October 1st 2021 – is built to get you creating records immediately. These are all the plug-ins you need to write, produce, mix and master your music in studio quality.

Hitmaker Expansion features exclusive content from legendary Auto-Tune® creators Antares®, along with Brainworx®, Softube®, XLN Audio®, Relab and more.

ALL THE TOOLS YOU NEED TO START RECORDING RIGHT, NOW

There’s no better way to step into studio recording – your Scarlett interface comes with some of the best loved tools in the business, including:

Hitmaker Expansion: features exclusive content from legendary Auto-Tune® creators Antares®, along with Brainworx®, Softube®, XLN Audio®, Relab and more.

Ableton® Live Lite™: the iconic DAW gives you everything you need to get started including instruments, effects and Live’s trademark clip and scene launching for taking ideas further or performance.

Focusrite Plug-in Collective: get a new plug-in and exclusive offers from a new partner every few months.

Three Month Avid® Pro Tools® Artist Subscription with Complete Plugin Bundle

A three-month subscription to Avid Pro Tools Artist and Avid Complete Plugin Bundle, with a 25% discount on Avid Pro Tools Artist after the subscription period, or a 33% discount on Avid Pro Tools Studio.

Three Month Splice Sounds Subscription: spark inspiration instantly with Splice’s huge Sounds library. With 100 credits per month added to your account, you can grab samples of thousands of artists and millions of sounds.

Plug-in Collective, for a lasting connection

When you buy any Focusrite hardware you gain access to the most innovative music software brands on the market. Plug-in Collective keeps you up to date on the latest tools, offering you new free downloads every couple of months, along with generous discounts. Let’s stay together.


Hosa Technology HSX-005 Balanced 1/4 Inch TRS Male 3-Pin XLR Male - 5 ft

This cable is designed to connect gear with balanced phone outputs to gear with XLR inputs. It is ideal for use in touring and other live-sound applications.

Features include:

  • REAN® connectors for superior signal transfer rugged durability
  • 24 AWG Oxygen-Free Copper (OFC) conductors for enhanced signal clarity
  • 90 % OFC spiral shield for effective EMI and RFI rejection and flexibility

Conductor(s): 24 AWG x 2 OFC
Connector(s): REAN 1/4 in TRS to XLR3M
Length: 5 ft
Shield: 90% OFC Spiral

Landr Studio, plus five free masters

Produce and release your best work with two months' access to Landr Studio, as well as five free masters you can use even when your two months subscription is over.

Adam A7V 7-Inch Active Studio Monitor Speaker w/ Rotatable X-ART Tweeter

  • Tweeter: Rotatable X- ART Tweeter + HPS Waveguide 
  • Woofer: 1x 7" MLM woofer 
  • Woofer Voice Coil Ø: 33 mm / 1.3”
  • Frequency response @ -6dB: 41 Hz - 42 kHz
  • peak SPL per speaker at 1 m: 105 dB SPL
  • AD convertor: 24-bit
  • Internal sample rate: 96 kHz
  • Amplifier power RMS: 110 W (Woofer) + 20 W (Tweeter)
  • Crossover frequency: 2.8 kHz
  • Power rating: 300 W max 
  • Analog Inputs (balanced): 1x XLR
  • Analog Inputs (unbalanced): 1x RCA 
  • Net Weight: 8.7 kg / 19 lb 3 oz 
  • Gross Weight: 10.7 kg / 23 lb 9 oz 
  • Cabinet Height x Width x Depth: 337 mm x 200 mm x 280 mm [13 1/4" x 7 7/8" x 11"]
  • Box Dimensions: 470 mm x 330 mm x 415 mm [18 1/2“ x 13“ x 16 3/8“]
  • AC Input Voltage: 100 - 240V, 50/60 Hz


Focusrite Scarlett 2i2 3rd Gen USB 2.0 Audio Interface 2 Inputs 192kHz

  • Supported Sample Rates
    • 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz
  • Microphone Inputs
    • Frequency Response: 20Hz - 20kHz ± 0.1dB
    • Dynamic Range: 111dB (A-weighted)
    • THD+N: <0.0012%
    • Noise EIN: -128dBu (A-weighted)
    • Maximum Input Level: 9dBu (at minimum gain)
    • Gain Range: 56dB
    • Impedance: 3kΩ
  • Line Inputs
    • Frequency Response: 20Hz - 20kHz ± 0.1dB
    • Dynamic Range: 110.5dB (A-weighted)
    • THD+N: <0.002%
    • Maximum Input Level: 22dBu (at minimum gain)
    • Gain Range: 56dB
    • Impedance: 60kΩ
  • Instrument Inputs
    • Frequency Response: 20Hz - 20kHz ± 0.1dB
    • Dynamic Range: 110dB (A-weighted)
    • THD+N: <0.03%
    • Maximum Input Level: 12.5dBu (at minimum gain)
    • Gain Range: 56dB
    • Impedance: 1.5MΩ
  • Line/Monitor Outputs
    • Dynamic Range (Line Outputs): 108dB
    • THD+N: <0.002%
    • Maximum Output Level (0 dBFS): 15.5dBu
    • Impedance: 430Ω
  • Headphone Outputs
    • Dynamic Range: 104dB (A-weighted)
    • THD+N: <0.002%
    • Maximum Output Level: 7dBu
    • Impedance: <1Ω


Hosa Technology HSX-005 Balanced 1/4 Inch TRS Male 3-Pin XLR Male - 5 ft

  • Type: Audio, balanced
  • Conductor: 24AWG OFC wire
  • Shielding: 90% OFC spiral shield
  • Connectors: 1 x REAN 1/4" TRS male phone connector, 1 x REAN 3-pin XLR male connector
  • Length: 5' (1.5 m)
More Information
Condition New
SKU BU-ADAM-A7V-1
UPC 7157325038
Weight 98.000000
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account