This product has been discontinued.

We have discontinued this product permanently. Please find alternative products from below section.

Alto Mixpack Express - Portable Powered PA System - Speakers + Mixer + Stands

SKU
BU-MPE350-STANDS
Alto Mixpack Express - Portable Powered PA System - Speakers + Mixer + Stands
Alto Mixpack Express - Portable Powered PA System - Speakers + Mixer + Stands

Alto MPE350 MixPack Express Ultra-Portable Powered PA System

The 350 Watt MIXPACK Express is one of three PA systems in the MIXPACK line, along with the 600 Watt MIXPACK and 1000 Watt MIXPACK Pro. Being the lightest and most portable of all MIXPACK PAs has its advantages. There simply isn't an easier, more affordable way to get this much clean power, mixing and Alesis DSP effects in one place. It takes only a few minutes from the time you bring MIXPACK Express into the venue, to the time the gig powers on, and power on it will. 

MIXPACK Express comes complete with two 10" speakers and 350 watts of continuous power. All the right connections are present including balanced XLR, balanced/unbalanced TRS and unbalanced RCA so no matter what you need to connect, you're all set. MIXPACK Express also includes two speaker cables in the package so you can get set up in no time. The speakers attach and detach to the amp/mixer module using firm, rugged latches and the entire kit can be carried in one hand thanks to a convenient, molded handle on top.

The built-in mixer on MIXPACK Express has five input channels with 16 Alesis DSP presets with 24-bit effects for Hall, Room, Vocal, Plate, Stereo Delay, Reverb + Delay and Reverb + Chorus combinations. Fine tune the performance with the integrated 7-band graphic EQ and monitor all of it with the built-in LED and Monitor Out jack.

If you need a solid PA system that is loaded with features and easy to transport, grab a MIXPACK Express. If you need a little more power, check out the MIXPACK and MIXPACK Pro, also from Alto Professional.

Features

  • 350 Watts of continuous power

  • Lightweight, one-piece design for convenient transport

  • Two 10” speakers with cables included

  • Built-in mixer with seven-band graphic EQ and XLR, line and RCA inputs

  • Integrated Alesis DSP with 24-bit effects including reverb, delay and chorus

 

Alto F8 Adjustable Speaker Tripod Stand for Mixpack Express

F8 Speaker Stands are a must-have accessory for your MIXPACK Express portable PA system.

With a compact, foldable design and durable aluminum construction, each F8 Speaker Stand is ready to go wherever you bring your MIXPACK Express system. Their aluminum bodies make F8 Speaker Stands lightweight and strong; they’ll give your MIXPACK Express speakers the elevation they need to properly fill a venue with sound while adding very little weight to your MIXPACK Express system, keeping it mobile and easy to transport.

Each F8 Speaker Stand comes equipped with easy to use knobs for quick adjustment and breakdown, and each has a steel safety pin that ensures your speaker will stay at the height you set.

Give your MIXPACK Express system a lift with F8 Speaker Stands from Alto Professional.

 

Features

  • Durable aluminum construction
  • Tripod base for optimal stability
  • Adjustable height
  • Ergonomic knobs for easy adjustment and breakdown
  • Steel safety pin for added stability
  • Compatible all MIXPACK loudspeakers

Alto MPE350 MixPack Express Ultra-Portable Powered PA System

Mixer Section

  • Microphone/Line Input:Electronically balanced, discrele input configuration

  • Frequency Response:10 Hz to 55 kHz, +/-3 dBu

  • Microphone Input Impedance:3.9 kΩ

  • Line Input Impedance: 10kΩ

  • Microphone Input S/N ratio: >94 dBu

  • Microphone Inputs: Balanced XLR connectors

  • Line Inputs:Balanced / Unbalanced, 1/4' (6.3 mm) TRS jack connectors

  • Tape Inputs:Unbalanced RCA jack

  • Inputs Distortion (THD & N):0.04% at 0 dBu, 1 kHz

  • Channel EQHigh shelving: +/-15 dB @ 12 kHz  Low shelving  +/-15 dB @ 80 Hz                                      

  • Aux Send:1 with paths for DSP internal section, external DSP section and Monitor Out

  • DSP Section:24-bit Hall, Room, Vocal, Plate, Stereo Delay, Reverb + Delay and Reverb + Chorus combinations

  • Master Section:Master Level knob, 4 LEDs level meter, 7-band graphic output EQ, and DSP Return level

  • Output Master EQ:7-band, +/-5 dB @ 63Hz, 160 Hz, 400 Hz, 1 kHz, 2.5 kHz, 6.3 kHz, 16 kHz

  • Monitor Section:Master Level knob, 4 LEDs level meter, and 1/4" (6.3 mm) Monitor Out jack 

Speaker Section

  • System Type2-way coax vented box

  • Frequency Response65 Hz - 20 kHz at -10 dB

  • Spherical horn Coverage70° H × 70° V

  • Continuous Power150 Watts AES Standard

  • Peak Power300 Watts Peak

  • ProtectionElectronic circuit on driver

  • Speaker Specification10" (254 mm) Low Frequency Driver /  2" (50.8 mm) Voice Coil, 1" (25.4 mm) Neodymium High

  • Input Connectors1/4" (6.3 mm) mono (TS) jack on each cabinet

Amplifier Section

  • Output Power350 Watts (EIAJ)  

  • Impedance4Ω

  • ProtectionsOverload / Short Circuit / Soft Clip Limiter / Thermal Protection Fan Cooling

  •  

Alto F8 Adjustable Speaker Tripod Stand for Mixpack Express

Compatibility: Works with all Alto Professional MIXPACK series speakers
Height: Adjustable

 

More Information
Condition New
SKU BU-MPE350-STANDS
UPC 7019548217
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account