This product has been discontinued.
- 16 total inputs including XLR jacks with Phantom Power on channels 1 through 4
- 4 mic input channels with gold-plated XLR and balanced line inputs
- 2 stereo input channels with balanced TRS jacks
- Extremely high headroom offering extra dynamic range
- 3-band EQ on each channel
- On-board digital effects processor and 3-shelf EQ on each mono and stereo channel
- Footswitch input for effects bypass/activation (footswitch not included)
- 2 aux sends pre-fader for external effects and monitoring
- 2-bus design with Main and Control Room 1/4” stereo outputs
Input Channels: Mono channels (Ch. 1 - 4)
Microphone Input: Electronically balanced, discrete input configuration
Frequency Response: 20 Hz to 22 kHz, +/-1 dB
Distortion (THD&N): ≦0.005% At +4 dBu, 1 kHz
Gain range: 0 dB to 50 dB (Mic)
Maximum Voltage Gain: 70 dB Ch. Mic input → Main Mix out & Tape out, 80 dB Ch. Mic input → Control Room & Phones, 60 dB Ch. Mic input → Aux send
SNR (Signal to Noise Rate ): ≧110 dBu
Phantom power (Mic Pin 2 / Pin 3 and Pin 1): +48 V - with switch control
Line Input: Electronically Balanced
Frequency Response: 20 Hz to 22 kHz, +/-1 dB
Distortion (THD&N): ≦0.005% at + 4 dBu, 1 kHz
Gain Range: 15 dBu to 35 dBu
Stereo Channels: (Ch. 5 - 8)
Line Input: Electronically Balanced
SNR (Signal to Noise Ratio): ≧110 dBu
Frequency Response:20 Hz to 22 kHz, +/-1 dB
Distortion (THD&N): ≦0.005% at +4 dBu, 1 kHz
Gain range: -20 dBu to +20 dBu, 60 dB Ch. Line → Main Mix out
Maximum Voltage Gain: 20 dB FX Return → Main Mix out, 20 dB RCA Tape input → Main Mix out
Impedance
Microphone Input: 3.9 kOhms
All Other Inputs: 10 kOhms or greater
Tape Out: 1 kOhms
All Other Outputs: 120 Ohms
Equalization
Noise (Bus noise): ≦-90 dB @ 20 Hz ~ 22 KHz (channel & Main level at 0 dB, other at minimum, DSP mute)
Dimensions (WxLxH): 256mm x 250mm x 72mm
Weight: 5.07 lb
Condition | New |
---|---|
SKU | ALT-ZMX-122FX |
UPC | 816311010177 |