This product has been discontinued.

We have discontinued this product permanently. Please find alternative products from below section.

EBS OctaBass Studio Edition Triple Mode Octave Divider Guitar Effects Pedal with Patch Cables

SKU
EBS-SE-OC-PATCH
EBS OctaBass Studio Edition Triple Mode Octave Divider Guitar Effects Pedal with Patch Cables EBS OctaBass Studio Edition Triple Mode Octave Divider Guitar Effects Pedal with Patch Cables EBS OctaBass Studio Edition Triple Mode Octave Divider Guitar Effects Pedal with Patch Cables
EBS OctaBass Studio Edition Triple Mode Octave Divider Guitar Effects Pedal with Patch Cables

EBS OctaBass Studio Edition Triple Mode Octave Divider Guitar Effects Pedal

THE EBS OCTABASS STUDIO EDITION ANALOG OCTAVE DIVIDER CREATES A SINGLE NOTE ONE OCTAVE BELOW THE PITCH OF THE PLAYED NOTE, ADDING A NEW DIMENSION TO YOUR SOUND.

Track your note. The pedal recognizes two or three-note chords and trigger the lowest note. Control the level of the original tone and mix in the octave effect. Choose between High, Mid or Low Range - which relates to the character of the sound of the sub-note.

Hints. Sub-notes are perhaps most effective when playing on the higher frets, and could add a nice touch just slightly blended into the original tone, especially on a solo on bass or guitar. The OctaBass works really good together with distortion as well, but remember to keep the OctaBass before the drive in the signal chain, so it get’s as clean as possible tone to trigger. If you are after a synth-bass type of sound, a great way to achieve that is to run an OctaBass, combined with an EBS BassIQ envelope filter, and use the ‘Down’mode on the IQ. That makes the impression of hitting a key on a keyboard, and adds that sub-bass as well as synth sound to the tone. 

The original EBS effect! The OctaBass was the very first stompbox effect from EBS. This classic effect was introduced in 1992, and based on an onboard effect featured in the legacy EBS Taurus combo. It has become 'classic' after being a trusted companion to legendary bassists like Tony LevinRoger GloverMarcus MillerTal Wilkenfeld & many many more...

The 2008 edition improvements added 3 dB higher headroom, higher sensitivity and new analog circuitry with higher dynamics and lower noise, as well as true bypass switching technique. 

The 2015 Studio Edition comes with optimized signal path, new design, new signal relay switching technique, protection against over voltage use up to 18V and the possibility to power the pedal with anything from 9-12V DC.

 

Features

  • Preserve the low range
  • Suitable for live and studio use
  • Triple Mode Octave Divider
  • High, Mid and Low Ranges
  • Controls for Normal and Octave volume
  • True Bypass Signal Relay Switching
  • Protected against over voltage up to 18V
  • Powered by 9 to 12V DC
  • Optional (not included): EBS AD-9+ Power Supply

Strukture S6P48 Right-Angle Guitar Patch Cable 6 in.

  • Length: 6 in.
  • Jack: Right-angle
  • High quality woven outer covering
  • State-of-the-art shrink-wrap sleeve
  • Thick ABS sleeve protects solder connections
  • Dual right angle connectors

EBS OctaBass Studio Edition Triple Mode Octave Divider Guitar Effects Pedal

Nominal Input Level -8 dBv
Input Impedance 700 kohms
Dry Bandwidth +0 / -2 dB 20 - 20k Hz
Dry Level min / max -oo / 0 dB
Dry Noise Level   -96 dBv
Octaver Bandwidth +0 / -3 dB 10 - 110 Hz
Octaver Level Gain min / max -oo / 12 dB min
Octaver Filter Slope 18 dB/oct. Low pass
Low Pass Triggering Threshold -70 dBv @200 Hz
Dimensions (L x W x H) 2.8 x 4.5 x 1.4” (70 x 115 x 35 mm)
Weight 400g (0.88 lb.)
Bypass True Bypass
Power Requirements 9-12 V DC Regulated, 30 mA max

 

More Information
Condition New
SKU EBS-SE-OC-PATCH
UPC 7021452355
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account