The K1 is a DAC / Amplifier portable headset that is distinguished both by its ergonomics and its design as their construction and electronic architecture.
Equipped with a USB interface that can support PCM audio files up to 24bit / 96kHz, this interface can be used without drivers on PC and MAC. It can be easily connected, no external power is required.
It has a PCM5102 converter having the distinction of having a high signal to noise ratio and low distortion associated with an amplification stage based TPA61332A Texas
Features
- Ultra-portable DAC and headphone amplifier
- Decode audio over USB
- TI PCM5102 DAC with support for 24-Bit/96KHz
- USB powered
Weight |
11.3g (incl. belt clip) |
Audio Input |
Micro USB |
Drive ability |
16~100 Ω (recommended) |
Battery Capacity |
N/A |
Output Power 1 |
>75 mW(16Ω/THD+N<1%) |
THD+H |
<0.01% (1 kHz) |
Frequency Response |
20 Hz~20 kHz |
Input Sensitivity |
>0 dB |
Crosstalk |
≥70 dB (1 kHz) |
Gain |
1.2 dB |
MAX output voltage |
3.25 Vp-p |
Color Available |
Titanium |
Dimensions |
50mm x 20.5mm x 8mm |
Headphone output |
Standard 3.5mm Port |
Sample rate (USB decoding) |
Max 96kHz/24bit supported |
Power supply |
USB on PC |
Output Power2 |
>35 mW(32Ω/THD+N<1%) |
Output Impedance |
≤ 1 Ω |
SNR |
≥100dB (A-weighted) |
MAX input Level |
N/A |
Channel imbalance |
< 0.3dB |
Status LED |
Yes (blue light when on) |
MAX output current |
35.93 mA |
Condition | New |
---|---|
SKU | FIIO-K1 |
UPC | 6953175710059 |
Weight | 0.130000 |