This product has been discontinued.

We have discontinued this product permanently. Please find alternative products from below section.

Heil Sound PR 40 Dynamic Studio Microphone Bundle with PRSM Shock Mount, PL2T Overhead Broadcast Boom, and XLR Cable

SKU
BU-HEIL-PR40-A
Heil Sound PR 40 Dynamic Studio Microphone Bundle with PRSM Shock Mount, PL2T Overhead Broadcast Boom, and XLR Cable
Heil Sound PR 40 Dynamic Studio Microphone Bundle with PRSM Shock Mount, PL2T Overhead Broadcast Boom, and XLR Cable

Heil Sound PR40 Large Diaphragm Multipurpose Dynamic Microphone

The Heil Sound PR40 is a full-range dynamic microphone designed with the ability to reproduce frequencies as low as 28Hz, ideal for live sound, recording, and broadcast applications. The unique, copper-wound voice coil uses a mixed metallic magnet structure that creates a magnetic field 10 times stronger than most mics. Coupled with a large 1-1/2", low-mass, quilted aluminum diaphragm, this makes for tremendous low-frequency response and low distortion throughout the PR40 mic's wide frequency range. A unique dual pop screen design ensures that breath blasts never hit the diaphragm directly.

Features:

  • Large 1-1/2" aluminum diaphragm
  • Wide frequency response, down to 28Hz
  • End fire, cardioid pattern
  • Low handling noise
  • Natural articulation

 

Heil Sound PL2T Overhead Broadcast Microphone Boom Mount

The Heil Sound PL-2T overhead boom uses a system of perfectly balanced internal springs rather than the unsightly mechanically unstable outboard springs used on booms of much lesser quality. Handles microphones up to 3-1 2 pounds in weight. Remove the top and back plates to thread the mic cable inside the boom with ease. No more cable connectors to remove and replace! Ships with a standard C-clamp mount. The PL-2 accepts industry standard 5 8 threaded mic clips or shockmounts. The chrome threaded stem can be locked into place depending upon the exact type of microphone or shockmount. Counterweight included to accommodate lighter microphones. Need to mount the PL-2T permanently to a desk or table? See the FL-2 Permanent Flange Mount (sold separately).

Heil Sound PRSM Microphone Shock Mount - Champagne

The PRSM Shock Mount is a flexible support system that helps suppress low-frequency rumble on the microphone line by absorbing and damping vibrations picked up from the studio desk or console.

The PRSM is designed for use with the large-diameter professional-grade Heil Sound microphones, including the PR 30, PR 30B, PR 31BW, PR 40, PR 780, PR 781. Its 5/8" threads mount onto the PL-2T "Topless" and other mounts, for easy installation. Black (PRSM-B) and Champagne (PRSM-C) colors are available.

Pig Hog PHM10 8mm Microphone XLR Cable 10ft

Pig Hog cables are precisely overbuilt to stand up to the most grueling tour conditions imaginable. They feature extra-thick 8mm wire, performance quality connectors, and tension-resistant stress relief. And with Pig Hog's "no question" lifetime guarantee, we've got your back for the life of the cable. Don't settle for those fat-free cables. Grab hold of a Pig Hog!

Features

  • High performance microphone cable

  • 8mm high quality rubber outer covering

  • Heat shrink protected connectors

  • Lifetime guarantee

Heil PR40 Dynamic Microphone

Generating element: Copper-wound dynamic with neodymium magnet structure
Body: Steel body with zinc die-cast bottom ring
Frequency response: 28Hz to 18kHz
Impedance: 600 ohms balanced
Output level: -53.9dB @ 1,000 Hz.
Polar pattern: End fire, cardioid, uniform front to back discrimination
Diaphragm: Large diameter low-mass aluminum
Finish: Anodized champagne matte
Net weight: 1 lb.

Heil Sound PL2T Overhead Broadcast Microphone Boom Mount

Product Dimensions: 60.7 x 18.4 x 6.4 cm

Heil Sound PRSM Microphone Shock Mount - Champagne

  • Item Weight 1.4 pounds
  • Product Dimensions 1 x 1 x 1 inches
More Information
Condition New
SKU BU-HEIL-PR40-A
UPC 7052335561
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account