This product has been discontinued.
We have discontinued this product permanently. Please find alternative products from below section.
Keith McMillen Instruments K-Mix BLUE 8-In / 10-Out Programmable Digital Mixer
SKU
KMI-K-737B
Announcing the K-Mix BLUE Edition
K-Mix BLUE is a performance upgrade of our K-Mix high-quality 8×10 digital mixer, USB audio interface, and advanced touch-sensitive MIDI/DAW control surface.
The New K-Mix BLUE Edition features:
- Upgraded, ultra-accurate and low noise µPre preamps
- New ultra-durable ABS-Polycarbonate finish
- Full Ableton Live 11 control surface integration.
Features
Audio Interface
K-Mix is a pro-quality USB audio interface with transparent µPre preamps for quality recording in the studio or on the stage.
Programmable Mixer
K-Mix is a fully programmable mixer that features flexible routing, per-channel DSP, and can function without a computer.
Control Surface
K-Mix features an unbreakable precision opto-tactile control surface designed from the ground up to command any DAW.
Digital Mixer
- High Pass Filter, Three band EQ, Gate, and Compressor on Every Channel
- On-Board Reverb with Dedicated Send/Return Bus
- Flexible Routing to four Stereo Output Buses and USB
- Headphone Monitoring of Channels, Busses, or a Dedicated Mix
- Standalone Quad, 5.1, 7.1 and Octo Surround Mixer
- Onboard Preset Storage
- No Computer Required
Audio Interface
- USB Bus Powered
- Ultra-Low Noise µPre™ Preamps
- High-End AKM Converters
- 32-bit Floating Point Signal Path
- 8-in/10-out Audio
Control Surface
- Ultra-Sensitive Precision Rotaries and Faders
- User Assignable MIDI Controls in Three Banks
- Light Weight and Portable
- Rugged Construction, No Moving Parts
Audio
- input Channels
- 8 Balanced Inputs
- Signals up to +28dBu
- output Channels: 10 Outputs (8 balanced)
- Bit depth
- 24-bit AKM Converters
- 110dB dynamic range
- sample rate: 44.1kHz, 48kHz, 88.2kHz, 96kHz
- internal latenCy: ~2.5ms
Connections
- analoG inputs
- 2 XLR/TRS combo jacks:
- XLR Mic/Line Inputs (balanced)
- Hi-Z Inst/Line 1/4” TRS Inputs (balanced)
- 6 1/4” TRS Connectors (line/phono, balanced)
- analoG outputs
- 8 1/4” TRS Connectors (balanced)
- 1 stereo 3.5mm TRS headphone output
- < 50 Ohms output impedance
- +2.6dBV max output level
- diGital
- 1 Micro-USB (Audio I/O, MIDI I/O, Power)
- 1 Mini-USB (Power, Expander MIDI)
Control
- Faders
- 8 channel faders (75mm)
- 12 LED indicators per channel fader
- 1 master fader with 24 LEDs
- MIDI position CC output on all faders
- rotaries
- 4 rotary controls (360°)
- 16 LEDs per rotary
- MIDI position CC output on all rotaries
- Buttons
- 9 Channel Select Buttons
- 4 Bank Select Buttons
- 17 Function Buttons
- MIDI note output on all buttons
Mic preamps
- numBer: 2 ultra low-noise µPre™ mic pres
- phantom power: +48V or +12V phantom power
- Gain: +60db additional gain
- thd + noise
- -105.12 dBu @ 0dB gain, 20Hz–20kHz (unweighted)
- -116.49 dBu @ 0dB gain, 20Hz–20kHz (A weighted)
- ein: -127.0 dBu, 150ohms @ 20Hz–20kHz, max gain (unweighted)
- FrequenCy response
- ± 0.03dB @ 20Hz–20kHz (44.1kHz, unweighted)
- ± 0.15dB @ 20Hz–40kHz (96kHz, unweighted)
Processing
- equalization
- 3-band semi-parametric EQ
- ±18dB cut/boost
- Compressor
- Compressor/Limiter on each channel
- Adjustable threshold, attack, release, and makeup gain
- Gate
- Noise gate on each channel
- Adjustable threshold, attack, release, and gain reduction
- reverB: Master reverb with individual sends per channel
- surround: Quadraphonic, 5.1, 7.1, and Octophonic
- surround output: Each channel assignable to one of four
- surround panners: Optional bass management crossover
| Condition | New |
|---|---|
| SKU | KMI-K-737B |
| UPC | 658580050054 |
Write Your Own Review