Konova K3 Slider 120cm & MS Kit 250 Motor with Basic Pan Tilt Controller

KONOVA KNK3120 K3-10

• Konova Slider Core Features
  
  Slider Dolly for smooth tracking shots
  
  The slider dolly allows quiet and smooth camera movements. The camera carriage glides smoothly over the rail, which can be aligned horizontally, vertically and diagonally. Multiple screw threads allow to fasten the rail to one or more tripod stands.
  
  Smooth camera movement
  
  The specially designed dolly glides smoothly on a pulley system mounted on the rail. It is made with a 3/8 "connector to attach a tripod head or video head. A mounting screw prevents the dolly of unintentional slipping, if the rail is aligned vertically. In order to remove dust from the metal bars of the rails, you will find two oil sills that can be pulled over the rail.
  
  Adjustable legs
  
  For a secure grip on different surfaces, the legs are fitted with rubber feet. To compensate unevenness in the floor and straighten the camera bracket, all four feet can be adjusted in height and angle.
  
  Vertical, horizontal or diagonal orientation
  
  The slider can either be oriented close to the ground attached to the included legs, or in various combinations on tripods. For mounting on tripods you will find connecting threads at the bottom of the slider (right, centre and left). For vertical movements, the slicer can be mounted vertically on a tripod. To attach a tripod, you will find connecting threads at the head and the foot of the slider. All connection point offer one with a 1/4" and one with a 3/8" thread.

Konova MS Kit 250 Motor with Basic Pan Tilt Controller

• MS Kits(Motorized Kits) without any controller
• The MS kits can work in different shooting positions. (Horizontal, vertical, diagonal)
• Easy to set up: can be set up on the slider in less than 30 seconds.
• Expandability: The MS kits are compatible with KONOVA Basic Pan Tilt controller, Smart Pan Tilt controller and Smart Head for 3 Axis motion(tracking, panning and tiliting). powerful motor: it can support up to 20kg(44lbs)
• There are 3 motors available for different speeds (1/50, 1/250 and 1/1500).