Pioneer DDJ-SX2 DJ Controller + Mackie Thump 15A 1300W Speakers + Bags + Cables + Stands

Pioneer DDJ-SX2 Serato DJ 4 Channel Controller

The DDJ-SX2 is the industry’s first controller to give DJs dedicated control of the new Serato Flip functions within Serato® DJ . Serato Flip is an expansion pack for Serato DJ that gives DJs the power to record and re-play hot cue sequences on the fly. The DDJ-SX2 is the only controller with designated buttons – Record, Start, and Slot – to put intuitive Serato Flip performances at their fingertips. The four-channel DDJ-SX2 builds on the popularity of its predecessor, but inherits two must-have features from the top-flight DDJ-SZ: Performance Pads with velocity sensitive, multi-colored LEDs and on-jog digital cue point markers. The DDJ-SX2 is also Serato DJ DVS upgrade ready and boasts improved jog wheel reaction time

 Serato Flip is a new function in Serato DJ that lets DJs record hot cue combinations and replay them on a loop. DJs can record themselves triggering cues using the Performance Pads and automatically loop the sequence back on demand. Up to six recordings (slots) of Hot Cue sequences can be made for playback at a later time. Pioneer added Record (start/stop recording), Start (start/stop loop), and Slot (store) buttons to quickly access the Serato Flip operation.

 CONTROL LAYOUT

The DDJ-SX2 provides the same functional layout of its predecessor with quick access to a multitude of Serato DJ features. The layout of the buttons, knobs, sliders and Performance Pads deliver the best DJ controller experience designed to match the applicable software functions perfectly:

 Multi-colored Performance Pads – Introduced in the top-of-the-line DDJ-SZ, the DDJ-SX2 now incorporates the highly attractive and functional multi-colored Performance Pads that control eight types of Serato DJ functions. The various illumination colors provide quick identification of the different actions/commands such as beats and drum rolls. The eight pads located below the Jog wheel offer HOT CUE, ROLL, SLICER and SAMPLER functionalities. While in velocity SAMPLER mode, the output level from the pad can vary depending on the strength of each tap from the user.

 Amplified MIC Input – Improved from the first generation, the controller features a balanced microphone (MIC) input circuit to provide clear audio output with no distortion regardless of the type or brand of microphone used. The controller can deliver clear audio even at high volume levels because of increased headroom and highly improved signal-to-noise (S/N) ratio.

High Accuracy Jog Wheel – The output reaction time of the JOG wheels is significantly improved, further cutting down on latency, ensuring tasks such as “scratch” performances are at their highest levels. The model also features “Hot Cue Countdown” providing users, via its JOG Display, with the time remaining to a Hot Cue point, helpful in quickly arriving to a specified position in the music playing.

 4-Channel Mixer – The DDJ-SX2 features an independent 4-channel mixer that can be used with other external sources such as turntables. Its master level meter provides instantaneous sound level adjustment as well as independent output controls with a display indicator for each channel when used as a standalone mixer.

 ADDITIONAL FEATURES

• High Quality Audio – A low-jitter clock and high-performance digital-to-analog converter (DAC) provide accurate and clear audio playback
• Slip Mode – While activated, Slip Mode silently continues song playback during a performance loop, scratch or hot cue and resumes audible playback when the loop, scratch, or hot cue operation is ended, creating smoother and more seamless transitions
• Aluminum Finish – The DDJ-SX2 sports an aluminum top panel and a brushed aluminum finish on the JOG wheels for optimal look and feel
• Multiple Connection Options – The DDJ-SX2 offers dual CD and phono/line inputs for external devices as well as two microphone inputs, two Master Outputs (XLR and RCA) and a Booth Out terminal
• Built-in Sound Card (audio interface)
• Needle Search – Users can immediately jump to a specific part of a music track with a simple touch of the Needle Search pad
• Adjustable Cross-Fader Curve – Suits any type of mixing style
• Channel Fader Start – Enables use of the channel fader to control and play/cue tracks.
• Assignable Settings – Pioneer offers a TSI file for use with the Native Instruments TRAKTOR PRO2 software

Samson R21S Dynamic Microphone

Samson's R21S Dynamic Microphone brings great sound and versatility to a variety of vocal miking applications. Perfect for live vocal performances, presentations and more, the R21S is engineered to the finest detail to provide any performance with exceptional sound reproduction and accuracy.

The heart of the R21S's performance stems from its shock mounted mic element. Offering high gain output and a low impedance design, the capsule also features a cardioid pickup pattern. This enables the R21S to pick up all the nuances of any performance with exceptional clarity and detail, while reducing feedback and unwanted signals.

The R21S offers a frequency response of 80Hz–12kHz, which is ideal for vocal and presentation applications. Also equipped to withstand high sound pressure levels, the mic produces vocals that sound huge and crystal clear. This makes the R21S a versatile tool in recording settings as well.

The R21S features a convenient On/Off switch, as well as an XLR to 1/4" mic cable. For added versatility, a mic clip is also included.

Features

• Cardioid pickup pattern

• Dual Stage Windscreen

• Gold-plated XLR connectors

• Mic Clip with Euro Adapter

• 18' XLR cable

Mackie Thump15A 1300W 15” Powered Loudspeaker

Delivering proven, chest-thumping low-end in an extremely affordable package; the 1300W Thump15A 15” Powered Loudspeaker has been redesigned from the ground up to sound better than ever. Thump™ features an all-new amplifier design with Dynamic Bass Response™ for chest-thumping low end. Plus, the flexible built-in 2 channel mixer features Vita™ preamps with Wide-Z™ technology that handle mic, instrument or line signals with ease. Application specific speaker modes let you dial in the system at the push of a button. And with an all-new professional enclosure and robust system protection, you can walk into your next gig with confidence.

Features

PROVEN THUMP PERFORMANCE

• 15″ high-output woofer / 1.4″ titanium dome compression driver
• 1300W of ultra-efficient Class-D powerNext-generation system protection and thermal limiting keep your system safe
  • LF - 1000W
  • HF - 300W

CLASS-LEADING, CHEST-THUMPING LOW END

• All-new amplifier design with Dynamic Bass Response™ technology allows for incredibly fast transient response delivering more chest-thumping low-end than ever

ULTIMATE FLEXIBILITY

• Built-in 2-channel mixer features Vita™ preamps with Wide-Z™ technology to handle mic, line and instrument signals with ease
• XLR thru output allows for simple wired connection to other Thump loudspeakers
• Flexible mounting options including tripod and pole-mounting
• Dual angle design perfect for use as a stage monitor

TOTAL SYSTEM OPTIMIZATION

• Four Application-specific speaker modes for instant system optimization
• Precision digital crossover
• Transducer time alignment
• Universal power supply (100-240VAC) with Power Factor Correction technology ensures consistent performance even with unstable AC power

LIGHTWEIGHT AND PORTABLE

• Completely redesigned professional enclosure designed for heavy use
• Loading in and out is easy with a new 4 handle design
• 40 lbs. / 18.1 kg

Ultimate Support JS-TS50-2 Pair of Tripod Speaker Stand with Carrying Bag

Speaker stands need to be both sturdy and easy to move. The Speaker Stand (Pair) fits on both accounts, giving you a stable environment in which to elevate your speakers to optimum height. Crafted from aluminum and powder-coated for finish durability, these stands will give you years of service. Each stand can hold up to 120 lbs. The strong telescoping and leg collars provide a stable stand for your speakers. The height adjustment collar has a safety pin for extra security. The JS-TS50-2 also includes a handy carry bag for FREE!

JS-TS50-2 Pair of Tripod Speaker Stand with FREE Carrying BagFeatures:

• Part Name: JS-TS50-2

• Long-lasting aluminum construction

• Durable powder-coated finish

• Tripod base is very stable and sturdy

• Stand is height-adjustable

• Carrying bag included for FREE!

• Holds up to 120 lbs.

• Height 46.5" - 81.5"

Pig Hog PHM20 8mm Microphone XLR Cable 20ft

Pig Hog cables are precisely overbuilt to stand up to the most grueling tour conditions imaginable. They feature extra-thick 8mm wire, performance quality connectors, and tension-resistant stress relief. And with Pig Hog's "no question" lifetime guarantee, we've got your back for the life of the cable. Don't settle for those fat-free cables. Grab hold of a Pig Hog!

Features

• High performance microphone cable

• 8mm high quality rubber outer covering

• Heat shrink protected connectors

• Lifetime guarantee

Mackie TH-15A Heavy Duty Nylon Protective Loudspeaker Carrying Bag

Perfectly fitting the form of a TH-15A active loudspeaker, this rugged bag has an extra compartment for cables and other accessories.

Features:

• made from black nylon

• extra compartment for accessories
  

• heavy-duty zippers

• padded for protection