Rode NT1 Complete Recording Kit
The NT1 is a revolutionary new 1" diaphragm condenser microphone from RØDE.
Although the body of the new NT1 closely resembles the NT1-A, the microphone has been completely redesigned from the ground up, with the only shared component being the mesh grille.
RØDE’s design engineers approached the NT1 as a marriage of innovation and tradition, starting with the capsule which is a completely new design. Codenamed the HF6, it is the perfect example of RØDE’s fusion of artistic design approaches and cutting-edge manufacturing techniques, and features a sound signature reminiscent of the famous microphones of old while at the same time exhibiting extremely low noise.
It has been developed with a focus on detailed midrange response, coupled with silky smooth high frequencies, and warm, round, bass reproduction to make the NT1 an absolute standout in its class.
In another world-first for RØDE, the transducer itself is suspended inside the microphone using Rycote’s industry-leading Lyre system, minimizing external vibrations at the capsule level. The capsule is then married to high-grade electronics that have been designed to provide the lowest noise level of any studio microphone available. The NT1 is an incredibly quiet microphone, measuring only 4.5dBA of self-noise.
Its body is machined from 6061 aluminium and then nickel plated for resistance against corrosion. Finally it is coated in a durable, military-grade ceramic layer, using advanced electrostatic application techniques developed by RØDE to ensure an extremely hard wearing finish that is resistant to scratches or marks.
The NT1 is supplied with the SM6, a high-quality suspension shockmount that provides isolation from external physical factors that may cause unwanted rumble and vibrations in the microphone. It includes a removable pop shield with two axes of adjustment and a telescopic arm for ultimate application versatility.
The NT1 is designed and made in Australia, and is covered by RØDE's industry-leading 10 year warranty.
- Large diaphragm 1” gold-sputtered capsule
- Cardioid polar pattern
- Internal capsule shock mounting system
- Ultra-low noise, self noise of only 4.5dB (A)
- State-of-the-art surface mount electronics
- 10 year extended warranty when you register your microphone
In The Box
- NT1: 1" Cardioid Condenser Microphone
- Microphone Dust Cover: Premium drawstring dust cover
- SM6: Shock Mount with Detachable Pop Filter
Ultimate Support JS-MCFB100 Tripod Mic Stand with Fixed-length Boom
On stage or in the studio, you need a mic stand you can rely on. The Tripod Mic Stand with Fixed-Length Boom resists tipping and is built tough to withstand every-day use. The powder-coated finish is scratch resistant to maintain its appearance, even on the most rigorous tour or recording schedules. Easily adjust the Tripod Mic Stand with Fixed-Length Boom to perfect height with the traditional turn clutch.
Features
- 31.5” Fixed-length boom arm for precise positioning
- Strong, tip-resistant tripod base
- Scratch-resistant powder coat finish
- Die-cast leg housing for dependable base support
- Non-slip rubber feet
Pig Hog PHM25 8mm Microphone XLR Cable 25ft
Pig Hog cables are precisely overbuilt to stand up to the most grueling tour conditions imaginable. They feature extra-thick 8mm wire, performance quality connectors, and tension-resistant stress relief. And with Pig Hog's "no question" lifetime guarantee, we've got your back for the life of the cable. Don't settle for those fat-free cables. Grab hold of a Pig Hog!
Features
- High performance microphone cable
- 8mm high quality rubber outer covering
- Heat shrink protected connectors
Rode NT1 Complete Recording Kit
- Acoustic Principle: Pressure Gradient
- Active Electronics: JFET impedance converter with bipolar output buffer
- Capsule: 1.00"
- Polar Pattern: Cardioid
- Address Type: Side
- Frequency Range: 20Hz - 20kHz
- Output Impedance: 100Ω
- Maximum SPL: 132dBSPL
- Maximum Output Level: 8.0mV (@ 1kHz, 1% THD into 1KΩ load)
- Sensitivity: -29.0dB re 1 Volt/Pascal (35.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
- Equivalent Noise Level (A-weighted): 4dBA
- Power Options: +24V phantom power+48V phantom power
- Weight: 440.00g
- Dimensions: 187.00mmH x 50.00mmW x 50.00mmD
- Output: XLR Output
- Warranty: 1 year with free extension to 10 years
Ultimate Support JS-MCFB100 Tripod Mic Stand with Fixed-length Boom
- Product Name: JS-MCFB100
- Part Number: 16791
- Boom Length: 31.5” (800mm)
- Height: 40.25” – 68” (1022mm – 1727mm)
- Threading: 5/8”
- Weight: 5.35 lbs. (2.53 kg)
Condition | New |
---|---|
SKU | BU-NT1-KIT-A |
UPC | 7016289161 |