This product has been discontinued.
Rode VideoMicro Compact On-Camera Microphone & SC7 3.5mm TRS to TRRS Patch Cable for use with iOS Devices
Rode VideoMicro Compact On-Camera Microphone
The VideoMicro is a compact microphone designed to improve the audio quality of your videos. It incorporates a high-quality cardioid condenser microphone capsule for great quality audio recordings when used with a wide range of cameras. A directional microphone, the VideoMicro reduces distracting peripheral sounds and focusses on the audio in front of the camera. Its pickup is more forgiving than RØDE’s other on-camera microphones providing a more natural sound when recording indoors. Perfect for capturing incredible audio to accompany inspiring vision. The microphone body is made from aluminum, giving it a high level of RF rejection, and is finished in RØDE’s high-grade ceramic anti-glare black coating. Included with the VideoMicro is a camera shoe mount featuring a Rycote Lyre shock mount. Featuring a suspension structure composed of a hard-wearing thermoplastic, it is far more effective at minimising unwanted vibrations, handling and cable-borne noise than traditional elastic suspensions. Virtually indestructible, the Rycote Lyre will never sag, snap, wear out or require rethreading to maintain its effectiveness. Also included is the WS9 synthetic furry wind shield with foam inner cell, designed for use in outdoor scenarios where wind and environmental noise can inhibit recordings. Optionally available is the RØDE SC7, a TRS to TRRS cable that allows the VideoMicro to be used with smartphones, to capture crystal clear, directional sound for video and video applications such as Periscope.
Features
- Compact size and lightweight - only 80mm (3’) long and 42gm (1.5oz)
- All-metal microphone body
- No battery required (powered by camera plug-in power - min 3V)
- Rycote® Lyre® shock mount included
- Deluxe furry windshield included
- Designed and manufactured in Australia
Rode SC7 3.5mm TRS to TRRS Patch Cable
The SC7 is a high-quality shielded patch cable, designed to allow the VideoMic GO to connect to TRRS compatible devices such as the iPhone or iPad.
The gold-plated contacts are colour coded, with grey indicating the TRRS output. The cable is colour matched to the red TRS to TRS cable that is supplied with the VideoMic GO, and is easily fitted by inserting the TRS (black) jack into the rear of the VideoMic GO and the TRRS end (grey) into the smartphone or tablet.
Rode VideoMicro Compact On-Camera Microphone
Acoustic Principle |
Pressure Gradient |
Active Electronics |
JFET impedance converter |
Capsule |
0.50" |
Address Type |
End |
Frequency Range |
100Hz - 20kHz |
Maximum SPL |
140dB SPL (@ 1kHz, 1% THD into 1KΩ load) |
Sensitivity |
-33.0dB re 1 Volt/Pascal (22.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
Equivalent Noise Level (A-weighted) |
20dB-A |
Power Options |
|
Weight |
42gm |
Dimensions |
21mmH x 21mmW x 80mmD |
Output |
Minijack/3.5mm |
Rode SC7 3.5mm TRS to TRRS Patch Cable
-
Weight: 20.00gm
-
Dimensions: 30.00mmH x 10.00mmW x 170.00mmD
Condition | New |
---|---|
SKU | BU-VIDEOMICRO-SC7 |
UPC | 7014497484 |