(3) Audix OM-5 Dynamic Hypercardioid Microphones with SKB iSeries Mic Case & Cables

Audix OM-5 Dynamic Hypercardioid Microphone 

The OM5 is made with an extremely tight and uniformly controlled hypercardioid polar pattern which isolates the vocals from the rest of the instruments on stage or in a studio.

Used on stage, in studios and for broadcast applications, the OM5 has a reputation for clarity, resistance to feedback and ability to handle SPLs in excess of 144 dB without distortion.

The OM5 is naturally attenuated at 120 Hz to reduce boominess and handling noise. The mid-range is tailored to provide extra presence in the vocals allowing the vocalist to be easily heard through the main speakers as well as the monitors.

Features

• High-quality sound at very high SPLs without distorion or feedback

• Naturally attenuated at 120Hz to reduce boominess and handling noise

• Mid-range tailored for clarity and presence

• VLM (Very Low Mass) technology delivers outstanding transient response

Pig Hog PHM20 8mm Microphone XLR Cable 20ft 

Pig Hog cables are precisely overbuilt to stand up to the most grueling tour conditions imaginable. They feature extra-thick 8mm wire, performance quality connectors, and tension-resistant stress relief. And with Pig Hog's "no question" lifetime guarantee, we've got your back for the life of the cable. Don't settle for those fat-free cables. Grab hold of a Pig Hog!

Features

• High performance microphone cable

• 8mm high quality rubber outer covering

• Heat shrink protected connectors

• Lifetime guarantee

SKB 3i-0907-MC3 iSeries Injection Molded (3) Microphone Case with Storage Compartment

The 3i-0907-MC3 allows 3 mics to be stored horizontally. Each microphone cutout measures 1.5” wide by 6.75” long with two perforated removable foam pieces, one located on each end allowing microphone sizes up to 8.5” in length. By removing the perforated foam piece near the grill of the microphone you can change the shape from being round to square. This will accommodate other popular hand held microphones with square style grills such as the Sennheiser and Electro Voice mics. The 3I-0907-MC3 case measures 9” x 7” x 4” deep and is the most compact 3-mic case on the market. 3I Series injection molded waterproof cases are constructed of ultra high-strength polypropylene copolymer resin and feature a gasketed, waterproof and airtight, submersible design (IP67) that is resistant to corrosion and impact damage. Its continuous molded-in hinge, patented "trigger release" latch system, comfortable, snap-down rubber over-molded cushion grip handle, secure stacking, and automatic ambient pressure equalization valve (MIL-STD-648C) all contribute to its military grade design.

Features

• Ultra high-strength polypropylene copolymer resin
• UV, solvent, corrosion and fungus resistant (MIL-STD-810F)
• Complete gasket seal makes these cases absolutely watertight (MIL-STD-C-4150J)
• Automatic ambient pressure equalization value (MIL-STD-648C & IP67)
• Resistant to corrosion and impact damage
• Continuous molded-in hinge
• Patented "trigger release" latch system
• Rubber over-molded cushion grip handle
• Custom cut foam to hold six microphones