ADAM Audio S3H Dual 7-Inch 3-Way Powered Midfield Studio Monitor Speaker Pair w/ SUB15 Subwoofer

ADAM Audio Sub15 15.5-Inch Powered Studio Subwoofer

ADAM Audio Sub15

The Sub15 is an extremely powerful subwoofer capable of extending the frequency range of main and midfield monitors down to 20Hz. The sturdy 15″ woofer is made of an exceptionally rigid aluminum membrane and is driven by two powerful magnets and a 100mm voice coil. With 1000 Watts (RMS) power capability, the PWM amplifier has an efficiency factor of nearly 90%. With these performance features, the Sub15 is easily capable of handling critical musical passages with intense and sudden bass peaks without showing signs of distortion or overheating. The downward firing bass port has been specially designed with ample dimensions and rounded edges to cancel any port noise.

In order to adjust the sound of the Sub15 to different room situations or individual taste, we have implemented several controls including one for volume (-60dB to +6dB) and one for the crossover frequency (50Hz – 150Hz). The satellite speakers can either be driven full range or high pass filtered at 85Hz. This allows the Sub15 to be easily integrated into a Dolby surround setup. Unfavorable phase relationships between the satellites and the subwoofer, particularly in the crossover frequency range, can be easily controlled with the supplied phase reverse switch.

The Sub15 is also very flexible when it comes to connectivity: There are balanced (XLR) and unbalanced (RCA) input/output connectors to be found on the rear of the subwoofer.

The Sub15 combines excellent transient response capability with an impressive low frequency performance to enable a genuinely musical reproduction experience. With a high and undistorted sound pressure output of 120dB maximum SPL at one meter, the Sub15 makes the perfect subwoofer for mid-sized and larger control rooms.

Features

• Linear bass reproduction down to 20 Hz
• Maximum Peak sound pressure in 1 m ≥ 120 dB
• High efficiency PWM amplifier
• Special 15" woofer with aluminum diaphragm
• Additional sub output
• Downward working bass reflex tube with generous dimensions and corresponding rounding
• Upper cut-off frequency is selectable between 50 - 150 Hz
• Connectable high-pass filter for the satellite outputs, which blocks signals below 85 Hz
• 2 years warranty with optional extension to 3 years with the registration of the product
  
  

Benefits

• Ideal addition to midfield and main monitors
• Powerful, compression-free sound reproduction even at very high sound levels
• Low-distortion amplification at both low and high volume levels
• Unrestricted bass reproduction for low-fatigue operation even at high volumes
• Allows building a (double) bass array
• Prevention of air turbulence noise
• Allows optimal adaptation of the total system on the bass performance of the satellites
• Dolby®- Fair reproduction of film sound
• Discharging the satellites from the low frequencies
• Full repair service if required for 5 years
  
  
  

ADAM Audio S3H Dual 7-Inch 3-Way Powered Midfield Studio Monitor Speaker

The S3H builds on the successes of ADAM Audio’s most popular studio monitors, the S3A and S3X-H, and, like its predecessors, sets new standards in terms of technical innovation and design.

The dual 7-inch bass drivers, powered by a 500 W Class D amplifier, offer flawless reproduction of frequencies all the way down to 30 Hz. ADAM Audio’s newly developed DCH, a 4-inch hybrid dome/cone mid-range driver, is powered by a 300 W Class D amplifier and handles audio above 250 Hz and below 3 kHz, its leading-edge hybrid design offering the sonic advantages of both cone and soft-dome drivers in a single, one-piece unit. Frequencies above 3 kHz are routed to the innovative combination of the S-ART treble driver (each handmade at ADAM Audio’s Berlin factory), the new precision HPS waveguide, and a 50 W Class A/B amplifier. The result of all this innovation is a beautifully transparent three-dimensional soundscape, with an extensive sweet spot.

The S Series’ custom-designed DSP optimizes the loudspeaker crossovers to create linear responses for the entire range, as well as providing user equalization and in-room tuning/voicing functions. A unique feature of the S3H’s DSP options is a built-in factory EQ preset that emulates the response of ADAM Audio’s legendary S3A monitor. The DSP also handles the limiter-based high-frequency driver protection, processes the signals from the AES3 digital inputs, and will in time facilitate various expansion options. Software updates can be carried out with ease via the associated USB port, which also allows users to connect computers and control the speakers’ DSP functions via a software front-end.

With its massively powerful amplification and three-way design (optimally configured for use horizontally), the S3H was conceived as a midfield monitor, but can be employed equally well in more compact listening environments. As with all ADAM Audio designs, the sound is punchy but musical, with crystal-clear reproduction of the all-important mid-range.

The S3H’s wide-ranging frequency response, its power amps’ instantly available, plentiful headroom, and the lack of need for additional subwoofers should appeal to any audio professional looking for a stand-alone, full-frequency active solution for their recording studio, one which provides equally detailed audio information at any volume setting, loud or quiet. Whatever your preferred output level, the S3H’s vibrant authenticity is a spur to creativity for producers, engineers and musicians everywhere, and its sound remains remarkably unfatiguing, even when working uninterrupted for extended periods.

Features

• S-ART tweeter, handmade in Berlin and manufactured to the tightest tolerances in ADAM Audio’s history
• The air velocity ratio of 4:1 during the sound generation by folded S-ART membrane
• Newly designed HPS waveguide, milled from a solid block of aluminum
• New midrange driver with one-piece hybrid dome/cone (DCH) design
• Custom-built Extended Linear Excursion (ELE) bass driver
• Custom-designed Symmetrical Magnet Assembly (SMA)
• Harzontal 3-way system with 2 x 7” woofer and 1 x 4"" DCH midrange
• Spacious bass reflex ports on the front
• Highly efficient PWM ICE Power amplifier for the woofer and midrange driver coupled with an A/B amplifier for S-ART tweeter
• Linear frequency response of 32 Hz to 50 kHz (-20 dB)
• Maximum peak sound pressure per pair in 1 m ≥ 124 dB
• Custom DSP engine
• Analog XLR input
• Acoustically optimized and weightily constructed cabinets
• 2 years warranty with optional extension to 3 years with the registration of the product
  
  

Benefits

• Allows longer operation with fewer signs of fatigue
• Their breakup is prevented by the folded diaphragms, distortions are effectively reduced to a minimum
• Advanced dynamic range due to acoustically effective diaphragm surface that is 2.5 times bigger (compared to a classic tweeter according to the piston principle)
• Direct, fast response in the high-range even with complex transients
• Makes dispersion more consistent and imaging more stable over a wider area
• Reduction of early reflections on the surfaces of, e.g. mixing consoles, desks, etc.
• Offering the sonic advantages of both driver types, with minimal partial resonances
• Partly responsible for the excellent mid-range dispersion characteristics of the S Series, due to improved integration with the treble driver
• Accurate audio reproduction at an extremely high resolution thanks to the precision-designed relationship between its low weight, optimized inner damping and highly rigid HexaCone membrane, in conjunction with a basket which has been developed to eliminate unwanted resonance and distortion
• Allows the voice coil a maximum excursion three times greater than that offered by previous designs, with an extended, symmetrical magnetic field ensuring linear, low-distortion operation
• Power compression effects are prevented by an intelligent self-cooling system
• Very high resolution of the stereo image
• Bass reproduction with very low compression
• Allows positioning close to walls
• Low-distortion amplification at both low and high volume levels
• Unbiased reproduction in a wide frequency band
• Powerful, compression-free sound reproduction even at very high sound levels
• Perfect crossovers for optimal frequency response and maximum dynamic range
• EQ options and presets for in-room optimization
• Limiter-based amp protection, AES3 digital inputs and board connectors for future expansion options, together with a USB connector for software upgrades and computer-based control
• Optimized for balanced line signals
• Reduction of susceptibility to vibrations and unwanted edge-diffraction effect
• Full repair service if required for 5 years