Audio-Technica AT4050ST Stereo Condenser Microphone AT4050 ST 4050 ST Mic

0 Review(s) | Add Your Review SKU: AT-4050ST |UPC: 4961310106676
Audio Technica
Audio-Technica AT4050ST Stereo Condenser Microphone AT4050 ST 4050 ST Mic

Availability: Out of stock

$1,299.00
Earn points:
1299
Reward Points earn 10 Points for reviewing this product.


  • Innovative side-address Mid-Side stereo microphone engineered for professional recording, broadcast and sound reinforcement



  • Independent cardioid and figure-of-eight condenser elements

Offering the realism of a live sound field, the AT4050ST is a side-address condenser with cardioid and figure-of-eight elements configured in a Mid-Side arrangement. This innovative stereo condenser allows sound recordists the choice of selecting a left-right stereo output or choosing discrete Mid-Side signals for later manipulation, a remarkable flexibility. The microphone’s dual-diaphragm capsules maintain precise polar pattern definition across the full frequency range. Its transformerless circuitry virtually eliminates low-frequency distortion.

    • Innovative side-address Mid-Side stereo microphone engineered for professional recording, broadcast and sound reinforcement


    • Independent cardioid and figure-of-eight condenser elements


    • Switch selection of Mid-Side mode and two internally matrixed stereo modes


    • Dual-diaphragm capsules maintain precise polar pattern definition across the full frequency range of the microphone


    • Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients


    • The 2-micron-thick, vapor-deposited gold diaphragms undergo a five-step aging process so that the optimum characteristics remain constant over years of use


    • Open acoustical environment of the symmetrical housing assembly minimizes unwanted internal reflections


    • Integral 80 Hz high-pass filter switch and 10 dB pad switch


    • State-of-the-art design and manufacturing techniques ensure compliance with A-T’s stringent consistency and reliability standards


    • Custom shock mount provides superior isolation


    • Certified by the METAlliance (Music Engineering and Technology Alliance)


SPECIFICATIONS
ELEMENT Externally-polarized (DC bias) condenser
POLAR PATTERN Cardioid and Figure-of-eight
FREQUENCY RESPONSE 20-18,000 Hz
LOW FREQUENCY ROLL-OFF 80 Hz, 12 dB/octave
OPEN CIRCUIT SENSITIVITY Stereo 90°: -42 dB (7.9 mV) dB re 1V at 1 Pa 
Stereo 127°: -41 dB (8.9 mV) dB re 1V at 1 Pa 
Mid: -36 dB (15.8 mV) dB re 1V at 1 Pa 
Side: -36 dB (15.8 mV) dB re 1V at 1 Pa
IMPEDANCE 50 ohms
MAXIMUM INPUT SOUND LEVEL Mid and Side: 149 dB SPL, 1 kHz at 1% T.H.D.; 
159 dB SPL, with 10 dB pad (nominal)
NOISE Stereo 90°: 25 dB SPL 
Stereo 127°: 16 dB SPL 
Mid: 15 dB SPL 
Side: 17 dB SPL
DYNAMIC RANGE (TYPICAL) Mid: 134 dB, 1 kHz at Max SPL 
Side: 132 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO Stereo 90°: 69 dB, 1 kHz at 1 Pa 
Stereo 127°: 78 dB, 1 kHz at 1 Pa 
Mid: 79 dB, 1 kHz at 1 Pa 
Side: 77 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS 48V DC, 6.4 mA typical (both channels total)
SWITCHES 90°, 127°, M-S; 
Flat, roll-off; 
10 dB pad (nominal)
WEIGHT 517 g (18.2 oz)
DIMENSIONS 193.0 mm (7.60") long, 
53.4 mm (2.10") maximum body diameter
OUTPUT CONNECTOR Integral 5-pin XLRM-type
CABLE 5.0 m (16.5') long, 8-conductor, shielded, vinyl-jacketed stereo cable with 5-pin XLRF-type connector at microphone end and two 3-pin XLRM-type connectors at output end
ACCESSORIES FURNISHED AT8449 shock mount for 5/8"-27 threaded stands; microphone dust cover; protective carrying case
AUDIO-TECHNICA CASE STYLE R1


SPECIFICATION GRAPHS
Click on the chart to view the larger image
POLAR PATTERN
POLAR PATTERN
STEREO 90°
POLAR PATTERN
POLAR PATTERN
STEREO 127°
POLAR PATTERN
POLAR PATTERN
MID
POLAR PATTERN
POLAR PATTERN
SIDE
FREQUENCY RESPONSE
FREQUENCY RESPONSE

 

Additional Information

Condition New
SKU AT-4050ST
UPC 4961310106676

Write Your Own Review

Only registered users can write reviews. Please, log in or register