Audix i5 Microphone with Cabgrabber Amp Microphone Holder & 10 ft XLR Cable

Audix i5 Dynamic Instrument Microphone

Designed with a cardioid pickup pattern for isolation and feedback control, the i5 is equipped with a VLM™ diaphragm for natural, accurate sound reproduction. The i5 is used for stage, studio and broadcast applications and is able to handle SPLs in excess of 140 dB without distortion.

The i5 can be used to mic a wide variety of musical instruments, guitars and bass cabinets as well as vocals and speech. The i5 is sturdy, compact and easy to position. With a wide frequency response of 50 Hz - 16 kHz, the i5 provides clear sound reproduction without having to rely on EQ.

Features

• Transducer Type: Dynamic

• Frequency Response: 50 Hz- 16kHz

• Polar Pattern: Cardioid

• Output Impedance 280 ohms

• Sensitivity: 1.6mV/Pa @ 1k
  

• Capsule Technology: VLM Type B

• Off axis rejection: >23dB

• Maximum SPL: ≥140dB

• Power Requirement: None

• Cable/Connector: 3 pin male XLR

• Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector

• Materials/Finish: Zinc Alloy / Black Finish
  

• Accessories: adjustable mic clip with 5/8" 27 thread stand adapter, zippered carrying pouch

• Length: 141mm / 5.6 in
  

• Weight: 248g / 8.7oz
  

Pig Hog PHM10 8mm Microphone XLR Cable 10ft

Pig Hog cables are precisely overbuilt to stand up to the most grueling tour conditions imaginable. They feature extra-thick 8mm wire, performance quality connectors, and tension-resistant stress relief. And with Pig Hog's "no question" lifetime guarantee, we've got your back for the life of the cable. Don't settle for those fat-free cables. Grab hold of a Pig Hog!

Features

• High performance microphone cable

• 8mm high quality rubber outer covering

• Heat shrink protected connectors

• Lifetime guarantee

Audix Cab Grabber Microphone Holder

Compact mic clamp for guitar amps and cabinets.

Features

• An innovative miking solution for guitar amps and cabinets

• Allows for precise positioning

• Simple, elegant, compact, and easy to use

• No tools required

• Adjustable, tension-held

• Mic arm hand tightens firmly into position

• Holds mics weighing up to 1 lb.

• Works on cabinets with flat surface or recessed edge

• Will clamp to side of cabinet or over top

• Fits 8–14" cabinets and amps