dbx DriveRack VENU360 3x6 Loudspeaker Management System
The VENU360 provides all the processing and flexibility you need between your mixer and amplifiers to optimize and protect your loudspeakers. With the latest advancements in dbx’s proprietary AutoEQ and AFS algorithms, additional input channels, ethernet control via an Android, iOS, Mac, or Windows device, and updated wizards, the DriveRack VENU360 continues the DriveRack legacy of great-sounding, powerful, and affordable loudspeaker management processors, for a whole new generation.
AutoEQ
New, improved AutoEQ algorithm ensures an extremely accurate, fast, and non-intrusive automatic EQ experience.
With a RTA Mic “listening” to your room, the updated DriveRack VENU360 AutoEQ algorithm sets speaker levels and room EQ automatically in a matter of seconds using sine sweeps. This means room adjustments can now be made very quickly, without subjecting the audience to annoying, lengthy broadcasts of pink noise.
The AutoEQ is now located in the output processing stage, which means independent sections of a system can be equalized automatically. This allows AutoEQ to be used on the FOH system as well as the stage monitors, zones and tower delays!
Enhanced AFS Feedback Elimination
Enhanced AFS algorithm for faster, more precise feedback elimination, without adversely affecting your system’s tone.
Nothing turns audiences away like annoying and potentially painful audio feedback. Fortunately, dbx engineers have revisited their already-stellar Advanced Feedback Suppression algorithm and made it work even better. The DriveRack VENU360 listens for and anticipates feedback and automatically removes it before it even has a chance, while never altering your sound.
Updated Wizard Setup Functions
Updated Wizards make initial set up easy, while ensuring speaker tunings and other settings are up-to-date.
Wizard functions in the DriveRack VENU360 guide you through easy, step-by-step processes to help you get the most from your loudspeaker system. The Wizards help you configure routing, level balancing, AutoEQ, Advanced Feedback Suppression, and provide access to updated speaker tunings – available for most major speaker brands. The addition of a Monitor Wizard makes it easy to configure and optimize stage monitors.
Mobile Control
Connect to the DriveRack VENU360 through your local network with your Android, iOS, Mac, or Windows device to customize the sound of your loudspeaker system so it sounds and performs optimally. The app lets you directly manipulate the Compressor, Graphic EQ, Parametric EQ, Crossover settings, Speaker profiles, and more with its attractive, easy-to-use graphical user interface.
Features
Input Processing
- dbx Compression
- AFS (Advanced Feedback Suppression)
- 31-Band Graphic EQ
- 12-Band Parametric EQ (with narrow notch capabilities)
- Subharmonic Synthesis
- Backline Delay
- Noise Gate
Output Processing
- Crossover (supports full range up to mono 6-way systems)
- 12-Band AutoEQs (8 AutoEQ bands, 4 User bands)
- dbx Compression
- Automatic Gain Control
- Subharmonic Synthesis
- Noise Gate
- Tower Delays (up to 1000ms per output)
- 8-Band Parametric EQs (used for speaker tunings)
- dbx Limiting
- Driver Alignment Delays
Tested Wireless Routers:
- Dlink 636L
- Dlink Cloud router 2000
- Cisco / linksys: WRT54G2V1
- Netgear WGR614 v7
- Netgear WNR 1000
Mogami Gold Stage XLR Male to XLR Female Microphone Cable - 30 ft
This ultra-rugged, "roadie proof" cable offers killer sound for active stage performers. Separating Mogami Gold Stage from other cable brands is unique cable cores with three times the number of copper strands compared to a typical high quality cable. The higher the stranding the less likely the cable is to break when handled. Two of these 105 strand cores are covered with a comprehensive full-coverage braided shield. This forms the basis of a nearly indestructible, yet highly flexible cable that offers transparency and accuracy unequaled by other brands.
Features
- Conductor insulation is XLPE (Cross-Linked Polyethylene) which has excellent electrical characteristics and prevents shrink-back during soldering
- Braided shielding makes Mogami Gold more durable
- For stage and broadcast, Mogami Gold Stage is extremely durable, a valuable feature on stage where cables tend to be abused
- Lifetime warranty
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer, reproductive, and developmental harm. For more information, visit www.p65warnings.ca.gov
dbx DriveRack VENU360 3x6 Loudspeaker Management System
Input | (3) analog line inputs/(2) AES digital inputs (shared connectors), (1) RTA mic input |
Input Connectors | (3) female XLRs (2 selectable between analog/AES digital audio formats), (1) female XLR RTA mic input |
Input Type | Electronically balanced/RF filtered |
Input Impedance | > 30 kΩ, balanced line to line |
Max Input Level (line inputs) | > +28 dBu, balanced, ≤1% THD |
CMRR | > 50 dB @ 1 kHz |
RTA Mic Preamp Phantom Power | +48 VDC |
Output | (6) Line Outputs |
Output Connectors | Male XLR |
Output Type | Electronically balanced, RF filtered |
Output Impedance | 120 Ω, balanced line to line |
Max Output Level | +22 dBu, balanced, ≤1% THD |
Alignment Delay | Up to 1000 ms per output channel |
A/D Converter | 24-bit with dbx Type IV™ Conversion System |
A/D Dynamic Range | 117 dB A-weighted, 114 dB unweighted, 22 kHz BW |
Type IV Dynamic Range | 129 dB with transient material, A-weighted, 22 kHz BW; 126 dB with transient material, unweighted, 22 kHz BW; 121 dB typical with program material, A-weighted, 22 kHz BW |
D/A Converter | 24-bit |
D/A Dynamic Range | 116 dB A-weighted, 113 dB unweighted, 22 kHz BW |
Internal Processing Wordlength | 32-bit floating point |
Supported Sample Rates | 48/96 kHz (32-192 kHz using sample rate conversion) |
System Performance Dynamic Range | 114 dB A-weighted; 110 dB unweighted |
THD+Noise | 0.0025% typical at +4 dBu, 1 kHz, 0 dB input gain |
Frequency Response | 20 Hz – 20 kHz, +0 /- 0.5 dB |
Interchannel Crosstalk | < -97 dB, -105 dB typical 20-20 kHz, +4 dBu, all channels measured |
Latency | Analog input to output: 2.57 ms (48 kHz), 2.28 ms (96 kHz); Digital AES input to output: 2.31 (48 kHz), 2.15 ms (96 kHz) |
Operating Voltage | 100-240 VAC 50/60 Hz |
Power Consumption | 18 W |
Unit Weight | 5.48 lbs. (2.49 kg) |
Shipping Weight | 7.10 lbs. (3.22 kg) |
Dimensions | 1.75” (H) x 8.0” (D) x 19” (W), 4.4cm (H) x 20.32cm (D) x 48.26cm (W) |
Mogami Gold Stage XLR Male to XLR Female Microphone Cable - 30 ft
High Quality Balanced Microphone Cable
Neglex Type #22AWG Balanced Microphone Cable
W2549 has been designed using our famous Neglex OFC to provide the highest quality audio reproduction in any recording application. It features #22AWG conductors and extremely low capacitance. The 100% coverage served shield and twisted pair construction is excellent at preventing noise caused by electromagnetic interference. This cable is recommended when extended high frequencies are important or where long cable runs may be needed.
Part No. | W2549 |
Conductor Size (mm²) | 0.339mm² (#22AWG) |
O.D. (mm) | 6.0ø (0.236") |
Flex Life | 14,500 cycles |
Tensile Strength | 657 N |
Colors | Black / Red / Yellow / Green / Blue |
Excellent for rugged remote and on stage use in Sound Reinforcement, TV, Radio broadcasting etc. Its compact size together with a heavy duty binder and filler system and a braided shield make it ideal for all continuous handling applications. Exhibits very low microphonic pick - up and can operate at very cold temperatures down to -20#176;C (-4#176;F) without losing its flexibility. 105 strands of 44AWG annealed bare copper features ultra flexibility with extraordinary flex life, while maintaining excellent strength characteristics.
Part No. | W2791 |
Conductor Size (mm²) | 0.206mm² (#24AWG) |
O.D. (mm) | 5.5ø (0.217") |
Flex Life | 131,000 cycles |
Tensile Strength | 578 N |
Colors | Black / Red / Yellow / Green / Blue |
Braided Shield | Coverage: over 95% |
Configuration | ![]() |
![]() |
|
Part No. | W2549 | W2791 | |
No. of Conductor | 2 | ||
Conductor | Details | 30/0.12 OFC | 105/0.05 A |
Size(mm²) | 0.339mm² (#22 AWG) | 0.206mm² (#24 AWG) | |
Insulation | Ov. Dia.(mm) | 1.9Ø (0.075") | 1.5Ø (0.059") |
Material | XLPE (Cross-Linked Polyethylene) | ||
Colors | Blue / Clear | Red / Clear | |
Shield | Served Approx. 64/0.18A | Braid 0.10A/9/16 | |
Jacket | Ov. Dia.(mm) | 6.0Ø (0.236") | 5.5Ø (0.217") |
Material | Flexible PVC | Flexible PVC | |
Colors | Black / Red / Yellow / Green / Blue | Black / Red / Yellow / Green / Blue | |
Roll Sizes | 50m (164 Ft) 100m (328Ft) 200m (656Ft) |
50m (164 Ft) 100m (328Ft) 200m (656Ft) |
|
Weight per 200m Roll | 11kg | 9kg |
ELECTRICAL & MECHANICAL CHARACTERISTICS
Part No. | W2549 | W2791 | |
DC Resistance at 20°C | Inner Cond. | 0.058Ω/m(0.018Ω/Ft) | 0.09Ω/m(0.027Ω/Ft) |
Shield | 0.013Ω/m(0.004Ω/Ft) | 0.002Ω/m(0.006Ω/Ft) | |
Capacitance at 1kHz, 20°C (Partial C. Value) See below figure* |
K0 | 76pF/m(23pF/Ft) | 86pF/m(26pF/Ft) |
K1 | 11pF/m(3.4pF/Ft) | 10pF/m(3.1pF/Ft) | |
Inductance between conductors at 1kHz. 20°C | 0.8µH/m(0.24µH/Ft) | 0.8µH/m(0.24µH/Ft) | |
Electrostatic Noise** | 50mV Max. | 250mV Max. | |
Electromagnetic Noise** | 0.15mV Max. | 0.15mV Max. | |
Microphonics at 50KΩ Load** | 30m V Max. | 30m V Max. | |
Voltage Breakdown | Must withstand at DC 125V/15sec. | ||
Insulation Resistance | 100000 M Ω × m Min. at DC 125V, 20°C | ||
Flex Life** | 14,500 cycles | 164,000 cycles | |
Tensile Strength | 657N | 578N | |
Emigration | Non-emigrant to ABS | Non-emigrant to ABS | |
Applicable Temperature | -20°C‾ +70°C(-4°F‾ +158°F) |
Condition | New |
---|---|
SKU | BU-DBX-VENU360-113017-1 |
UPC | 7068571496 |