Eliminator Lighting MBDMX-PLUS Heavy-Duty DMX Mirror Ball Motor

If you need a mirror ball motor that will allow you to synchronize up to 4 mirror balls via DMX control, then the Eliminator Lighting MBDMX-PLUS is the motor you are looking for. This motor supports mirror balls up to 20 inches in size. Let your mind be at ease knowing that your mirror ball is safely supported by the MB DMX II motor from Eliminator Lighting.

The MBDMX-PLUS motor will allow you to control up to 4 units simultaneously via 3-pin DMX In/Out and allow for a synchronized motor rotation and universal speed. This will results in many dramatic visual effects. Circuit Breaker protection is included so you don't need to worry about changing fuses. The MBDMX-PLUS motor is meant for indoor use only but is great for night clubs, mobile entertainers, bands, and permanent installations. Plus, there are two 3-prong Edison plus on the motor for powering pinspots or other lighting fixtures to light up the mirror ball.

The MBDMX-PLUS is equipped with 2 DMX channels: 1 channel to adjust the motor speed/direction of the mirror ball and 1 channel to turn the pinspots on and off. So when you are setting up that next dance and need the a fantastic display of light, hook up multiple mirror balls using the ADJ MB DMX II heavy-duty mirror ball motor. There is a 1/4-inch socket and a suppled infrared cable that allows control of the MBDMX-PLUS with a UC IR remote control.

Mirror ball, lighting and UC IR remote not included.