IK Multimedia AXE I/O SOLO 2-in / 3-out USB Audio Interface + AmpliTube 5 Bundle

Common

• AD and DA Resolution: 24-bit
• Sampling Rate: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz and 192 kHz
• Host Connection: USB Type-B receptacle. USB 2.0 (High Speed).
  
  

Line Outputs 1-2 (Monitor)

• Configuration: Electronically balanced and floating, automatically compensates level when connection is balanced or unbalanced, tip hot.
• Output impedance: 150 Ohms balanced, 75 Ohms unbalanced
• Output Level: 0 dBFS corresponds to +13.5 dBu
• Frequency response: From 1 Hz to 46 kHz within 0.5 dB (96 kHz sample rate)
• Dynamic Range: 113 dB(A)
• THD @ -1 dBFS: 0.001%
• THD+N: -103 dB(A) at -1 dBFS
• Channels 1-2 crosstalk: 112 dB(A)
  
  

Output 3 (Amp output)

• Configuration: Unbalanced, floating, with selectable ground lift
• Output impedance: 75 Ohms
• Output Level: 0 dBFS corresponds to -3 dBu
• Frequency response: From 20 Hz to 42 kHz within 0.5 dB (96 kHz sample rate)
• Dynamic Range: 106 dB(A)
• THD+N: -93 dB(A)
  
  

Headphones Out

• Output impedance: Virtually ideal source (zero Ohms) until clipping
• Maximum Output level: +9 dBu into 50 Ohms load (approx 95 mW)
• Frequency response: From 1 Hz to 42 kHz within 0.5 dB (96 kHz sample rate)
• Dynamic Range: 111 dB(A)
• THD+N: -102 dB(A)
  
  

Instrument Input

• Configuration: Multiple topology instrument preamp
• Input impedance, PASSIVE mode: Variable from 1 MOhms down to 2.2 kOhms
• Input impedance, ACTIVE mode: 10 kOhms
• Input level, min gain: 0 dBFS is obtained with a +12.5dBu signal at the TS input
• Input level, max gain: 0 dBFS is obtained with a -19 dBu signal at the TS input
• Frequency response: From 6 Hz to 42 kHz within 0.5 dB (96 kHz sample rate)
• Dynamic Range: 117 dB(A)
• THD, PURE mode: 0.002 % (-1dBFS input)
• THD, JFET mode: 0.5 %
  
  

Mic Input

• Configuration: Class-A discrete differential microphone preamp, pin 2 hot
• Input impedance: 4 kOhms differential
• Input level, min gain: 0 dBFS is obtained with a +9 dBu signal at the XLR input
• Input level, max gain: 0 dBFS is obtained with a -44 dBu signal at the XLR input
• Frequency response: From 7 Hz to 32 kHz within 0.5 dB (96 kHz sample rate)
• Dynamic Range: 116 dB(A)
• THD+N: -104 dB(A) at -10 dBFS
  
  

Line Input

• Configuration: Class-A discrete differential line receiver, tip hot
• Input impedance: 20 kOhms differential
• Input level, min gain: 0 dBFS is obtained with a +26 dBu signal at the TRS input
• Input level, max gain: 0 dBFS is obtained with a -27 dBu signal at the TRS input
• Frequency response: From 7 Hz to 32 kHz within 0.5 dB (96 kHz sample rate)
• Dynamic Range: 117 dB(A)
• THD+N: -104 dB(A) at -10 dBFS
  
  

Connections and Controls

Front Panel

• One 1/4" instrument input jacks
• Two analog potentiometers for Input GAIN
• Two 5 segments input level meter (peak)
• Analog potentiometers for Z-Tone control
• Pick-Up selector (PASSIVE/ACTIVE)
• Preamp topology selector (JFET/PURE)
• +48V phantom power switch
• USB LEDS
• MIDI IN/OUT LEDs
• Monitor knob
• 1/4" headphones output jack
• Master potentiometer for main output control
• 1/4" Amp output jack
  
  

Rear Panel

• MIDI I/O 5-pin DIN connectors
• B-Type USB socket for connecting a computer (Mac/PC)
• 2 x 1/4" TRS External controllers sockets
• 2 x 1/4" TRS Balanced floating line outputs
• 1 Combo socket for MIC input and Line input (auto selecting)
  
  

Package includes

• AXE I/O SOLO
• USB A-Type to USB B-Type connection cable (1.5m/4.32ft)
  
  

Dimensions

• Size: 19.5cm x 19.5cm x 5.3cm
• Weight: 1.0kg
  
  

Compatibility

Computers

64-bit application. Requires a 64 bit CPU and Operating System.

Mac® (64-bits)

Minimal: macOS 10.11 or later. One free USB port.

Windows® (64-bits)

Minimal: Windows 7 or later. One free USB port.

AmpliTube 5

• Fully redesigned Graphical User Interface
• Re-sizable display
• New VIR™ Volumetric Impulse Response cabinet engine
• Up to 2,400 impulse responses per cabinet
• New impulse response loader
• Fully redesigned power amps section with new impedance matching
• Improved chains with custom routing options
• Expanded rig with up to 57 simultaneous FX
• Over 400 gear models
• New effects derived from T-RackS
• Industry-standard sound with DSM™ (Dynamic Saturation Modeling) and VRM™ (Volumetric Response Modeling) technologies for Hyper-
• Realistic emulation of real world gear and the best sounding models
• Dynamic Response Modeling provides real amp response and feel — models dynamic relationship and interaction between power amp and speakers, plus physical and harmonic interaction between individual speakers, cabinet and room construction and mics
• Perfect as a plug-in for studio recording and mixing in any Mac/Win
• DAW, native compatibility with 64-bit applications and operating systems
• Also perfect for live performance thanks to the standalone version with instant preset switching via MIDI control
• Highest supported Sampling Rate: 96 kHz
• DAW automation and BPM synchronization
• Two movable microphones allow you to mic the cabinet exactly like in real world studio and live environment
• Replace individual speakers in cabinets (12” speaker models)
• 31 individual speaker models available with more added to Custom Shop
• Stereo signal path makes it suitable for any type of instrument including drums, keyboards, vocals and more
• Massive database of presets with multiple guitar and bass oriented tags and keywords, advanced search function and more
• Perfect integration with IK’s range of audio interfaces and controllers such as iRig AXE I/O, iRig Stomp I/O, iRig HD, iRig Pro, iRig 2 allows for instant recording and performing in the studio or on stage with full programming at the software level
• 8-track built-in multitrack recorder and DAW enables you to quickly capture ideas or even record a full 8-track composition in the standalone application without the need to open a DAW and with the convenience of AmpliTube superior quality audio processing
• Multi-Track Looper for capturing and layering ideas quickly and easily
• Export loops to hard drive and import into the DAW section, import audio to track 1 in looper for playing over backing track loop
  Imports any Wav, Aiff, sd2, Apple Caf, Flac, MP3 audio file (Standalone version)
• SpeedTrainer for speeding up/slowing down imported tracks without affecting the pitch – the perfect tool for practicing and improving your instrument skills or learning your favorite riffs and solos (standalone version)
• Expandable via the new redesign built-in AmpliTube Custom Shop feature with gear from the world’s top manufacturers and artists
• Universal upgrade is available to anyone and any previous version of AmpliTube — Restore gear from previous purchases via the Custom Shop
  
  

System Requirements

Mac® (64-bits)

• Minimal: Intel® Core™ 2 Duo (Intel Core i5 suggested), 4 GB of RAM (8 GB suggested), macOS 10.10 or later. 3 GB of hard drive space.
• Requires an OpenGL 2 compatible graphics adapter.
• Supported Plug-in formats (64-bit): Audio Units, VST 2, VST 3, AAX.
  
  

Windows® (64-bits)

• Minimal: Intel® Core™ 2 Duo or AMD Athlon™ 64 X2 (Intel Core i5 suggested), 4 GB of RAM (8 GB suggested). Windows® 7 or later. 3 GB of hard drive space.
• Requires an ASIO compatible sound card.
  Requires an OpenGL 2 compatible graphics adapter.
• Supported Plug-in formats (64-bit): VST 2, VST 3, AAX.