- Two Pulsar II microphones performance matched for accurate stereo sound
-
Switchable pads and low-cut filters provides outstanding versatility
-
Transformerless FET electronics designed for low noise and minimal coloration
-
Solid brass body with internal shockmounts delivers premium protection and performance
-
Includes stereo bar, risers and hard mounts allows excellent stereo positioning
Carefully selected for their nearly identical response, matched pairs of Pulsar II microphones from M-Audio® deliver superior stereo performance. The brass bodies are equipped with internal shockmounts and low-noise transformerless electronics. Each microphone offers a switchable 10 dB attenuation pad, plus an 80 Hz low-cut filter. Together, these functions allow the Pulsar II microphones to adapt to a variety of applications. The included hardware package allows Pulsar II microphones to be mounted in either an X-Y or ORTF (110º) stereo configuration. While ideal for stereo use, these microphones can also be used independently in a wide range of critical recording situations. This complete package includes a stereo mounting bar, hard mounts, risers, windscreens, and cloth bags, as well as a handsome and functional wooden storage/travel case.
-
Two response-matched M-Audio Pulsar II microphones
-
0.75" diameter, 6-micron sputtered gold diaphragms
-
Cardioid pickup patterns
-
Class A FET transformerless electronics
-
Brass bodies with internal shockmounts
-
Switchable 10 dB pads and 80 Hz filters (18 dB/octave)
-
48 Volt phantom power required
-
Includes stereo bar, hard mounts, risers, wind screens, and soft bags—all in a wooden travel case
-
Type: Large diaphragm condenser, gold evaporated
-
Polar pattern: Cardioid
-
Frequency response: 20 Hz-20 kHz
-
Sensitivity: 13.8 mV/Pa (-37dBV)
-
Max. SPL (<0.5% Threshold Level): 134dB; 144 dB using -10 dB Pad
-
Equivalent noise level: 15dB—A weighted
-
Output impedance: 300-600 Ω
-
Suggested Mic Pre Input Impedance: 1 - 2.5k Ω
-
Preamp topology: Class A FET, transformerless
-
Power requirement: 30 VDC - 50 VDC phantom power
-
Connector: 3-pin male XLR
-
Dimensions: 22mm (0.87") diameter x 132mm (5.20") length
Condition | New |
---|---|
SKU | MAUDIO-PULSAR |
UPC | 694318014875 |