MXL 2006 Cardioid Condenser Large Diaphragm Studio Microphone Shock Mount Case

0 Review(s) | Add Your Review SKU: MXL-2006 |UPC: 801813093094
MXL
MXL 2006 Cardioid Condenser Large Diaphragm Studio Microphone Shock Mount Case
MXL 2006 Cardioid Condenser Large Diaphragm Studio Microphone Shock Mount Case MXL 2006 Cardioid Condenser Large Diaphragm Studio Microphone Shock Mount Case

Availability: Out of stock

$109.95
Earn points:
109
Reward Points earn 10 Points for reviewing this product.

The MXL 2006 is a large diaphragm cardioid condenser microphone with a transformer-less FET output stage. The FET output stage is the optimum choice for low noise and transparency. The 2006's large diaphragm features a cardioid polar pattern for optimum rejection of residual noise while minimizing feedback. The 2006 boasts a wide frequency response that accurately reproduces audio signal in all ranges. The 2006 is suitable for vocal and general instrument capturing in any home or project studio.

The MXL 2006 is a large diaphragm cardioid condenser microphone with a transformer-less FET output stage. The FET output stage is the optimum choice for low noise and transparency. The 2006's large diaphragm features a cardioid polar pattern for optimum rejection of residual noise while minimizing feedback. The 2006 boasts a wide frequency response that accurately reproduces audio signal in all ranges. The 2006 is suitable for vocal and general instrument capturing in any home or project studio.

FET Tranformerless Output
The 2006 features an FET output stage for quiet, noise free audio output and maximum gain.
Cardioid Condenser
The cardioid polar patter effectively minimizes noise and off-axis audio for accurate signal reproduction while minimizing feedback.
Wide Frequency Response
The wide frequency response is delivers accurate audio fidelity no matter the signal source.

Additional Information

Condition New
SKU MXL-2006
UPC 801813093094

Transducer

Condenser pressure gradient mic with large 25mm diaphragm capsule

Polar Pattern

Cardioid

Frequency Response

30Hz-20kHz

Dynamic Range (Typical)

not specified by manufacturer

Signal-to-Noise Ratio

78dB (Ref. 1Pa A-weighted)

Maximum Input Sound Level

for 0.5% THD:

130dB

Power Requirements

Phantom Power 48V +/- 4V

Output Impedance

150 ohms

Output Connectors

3-pin XLR

Pad

No

Low Frequency Roll-Off

No

Dimensions

1.97 x 7.48" (50 x 190mm) (Diameter x Length)

Weight

1.3lb (594.20 g)

Write Your Own Review

Only registered users can write reviews. Please, log in or register

You may also be interested in the following product(s)