Nady Systems PEM-01 Single Channel UHF Wireless In Ear Monitor System
The revolutionary Nady PEM multi-frequency, in-ear wireless monitor series allows either one or multiple performers (additional receivers not included) the ability to receive crystal clear in-ear audio mixes.
The The PEM-01 features 16 available frequencies is rackmount-able and each receiver comes with comfortable EB-6 behind-the-ear access earbuds. The Nady PEM-01 Wireless Personal In-Ear Monitor System is an all-in-one wireless audio monitor solution for direct, uncompromised high-quality referencing. The Nady PEM-01 Wireless Personal In-Ear Monitor System provides clear audio transmission up to 300-feet, extended battery-life up to 11 hours of use, and a virtually endless expansion of receivers; serving perfectly for the most demanding musical and audio applications. The Nady PEM-01 Wireless Professional In-Ear Monitor System includes a PEM-01 Wireless Transmitter, PEM Wireless Receiver, and EB-6 behind-the-ear monitor earbuds.
- Frequency Response: 20Hz – 20,000Hz ±3dB
- Dynamic Range: 120dB (A-weighted)
- Total Harmonic Distortion: <0.1%
- Latency: 3ms
- RF Carrier Frequency Range: 16 user-selectable frequencies between 902 and 928MHz
- Operating Range: Up to 300 ft. typical (depending on site conditions); optimum line-of-sight
- Outputs: 1/8” (3.5 mm) receiver headphone jack (515mV/no load)1/8” (3.5 mm) Unbalanced line output jack (326mV/no load) 1/4” (6.35 mm) transmitter headphone jack (383mV/no load)
- Transmitter Battery Type: 2 AA Alkaline
- Transmitter Battery Life: Up to 11 Hour
OVERALL SYSTEM
- Frequency Range: Frequency Range: 903.250MHz – 927.650MHz
- Frequency Response: 60 Hz – 17,000 Hz (±3dB)
- Dynamic Range: 98dB
- Signal-to-Noise Ratio: > 80 dB, with proprietary companding noise reduction
- Operating Range: 300 feet line-of-sight
PEM-01 WIRELESS TRANSMITTER
- Controls: Power/Mute On/Off
- Connectors: ¼" Stereo headphones monitor out, two unbalanced ¼†line level inputs, 21mm barrel-type DC input jack; BNC antenna socket
- Power Requirements: DC 12V/1000mA
- Dimensions: 8.25x 7.125x 1.75
- Weight: 2.2 lbs
PEM BODYPACK RECEIVER
- Connectors: 3.5mm dual mono headphone output, 3.5mm line output
- Controls: Power/Mute On/Off
- Belt Clip
- Power Requirements: 2xAA
- Battery Life: up to 11 hours
Condition | New |
---|---|
SKU | NADY-PEM-01 |
UPC | 634343118889 |