Pair of PreSonus R Series R65 150W Active 2-way AMT Studio Monitors and Cables

Pair of PreSonus R Series R65 150W Active 2-way AMT Studio Monitors and Cables

SKU
BU-PS-R65-1
$799.90
Earning 799 points for this item
Applies only to registered customers, may vary when logged in.
Availability: In stock
Earn 10 points for writing a review for this product
Pair of PreSonus R Series R65 150W Active 2-way AMT Studio Monitors and Cables
Pair of PreSonus R Series R65 150W Active 2-way AMT Studio Monitors and Cables

PreSonus R Series R65 150W Active 2-way AMT Studio Monitor

Superior transient response.

In order to dampen resonance peaks at higher frequencies, conventional dome tweeters are injected with fluid to raise their mass, sacrificing transient response time. By contrast, the custom-designed AMT tweeter in the R65 uses an incredibly thin, folded Kapton® membrane (< 0.01 mm) with an inlayed aluminum circuit functioning as the voice coil, allowing the tweeter to move at the same instant as the electric current. The resulting reactive response time provides marked clarity and superior transient reproduction.

Wide, consistent stereo image.

An unfolded AMT tweeter diaphragm provides 8 to 13 times the projection area of a traditional 1-inch dome tweeter, enabling R65 monitors to provide a much wider stereo soundstage than traditional designs. At the same time, the R65 provides a very limited vertical dispersion, which helps to reduce reflections from the ceiling and desktop that can cause phase coherence issues. Because it’s less subject to room-anomaly interference, the R65 reacts predictably and sounds consistent from room to room.

Transparent sound.

The R65 utilizes a 6.5-inch, custom-coated, woven Kevlar® low-frequency driver. This rigid cone maintains a more consistent dispersion pattern across its frequency rtesponse range. Biamped and driven by a 150W Class D amplifier—making the R series some of the most powerful monitors in their category—these monitors deliver an open, clear, and less fatiguing listening experience.

Have it your way.

You can customize the R65 in several ways. It’s available with black or blue faceplates to fit your studio décor. With balanced XLR, balanced ¼” TRS, and unbalanced RCA line-level inputs, it’s easy to feed audio to your R65 monitors from a mixer, an interface, a media player, or almost any other line-level source. And R series monitors offer user-adjustable contour features for optimizing the monitors for your mixing space. This enables full integration into any studio environment.The R65 offers a four-position Acoustic Space switch that helps to compensate for the boundary bass boost that occurs when the monitor is placed near a wall. A high-frequency driver level control helps to further mitigate room anomalies. An onboard highpass filter makes it easy to integrate a Temblor® T10 or other subwoofer into your monitor setup.

 

Features

Components and construction

  • 2-way active AMT design provides articulate high-frequency response and wide stereo imaging
  • Custom-designed, 6.8-inch, AMT ribbon tweeter responds to the subtlest waveforms and the highest frequencies
  • 6.5 Kevlar® LF drivers provide transparent mid- and low-frequency reproduction for clean sound and punchy bass
  • Balanced XLR and ¼-inch TRS plus unbalanced RCA inputs provide flexibility for seamless integration into any environment


User controls

  • Acoustic Space settings (Linear, -1.5 dB, -3 dB, -6 dB) compensate for room placement


​Power and safety

  • Biamped 150W RMS (LF = 100W, HF = 50W), Class D power amplifier with switching power supply
  • RF interference, output current limiting, over temperature, turn-on/off transient, and subsonic filter protection
  • Energy Conservation Mode (with enable/disable) lowers standby power to <0.5W
  • External mains fuse
  • Internal power supply with IEC connector

 

Hosa Technology HSX-005 Balanced 1/4 Inch TRS Male  3-Pin XLR Male HSX005

This cable is designed to connect gear with balanced phone outputs to gear with XLR inputs. It is ideal for use in touring and other live-sound applications.

Features include:

• REAN® connectors for superior signal transfer rugged durability
• 24 AWG Oxygen-Free Copper (OFC) conductors for enhanced signal clarity
• 90 % OFC spiral shield for effective EMI and RFI rejection and flexibility

Conductor(s): 24 AWG x 2 OFC
Connector(s): REAN 1/4 in TRS to XLR3M
Length: 5 ft
Shield: 90% OFC Spiral

Specifications

PreSonus R Series R65 150W Active 2-way AMT Studio Monitor

Inputs 
  1- Balanced XLR
  1- Balanced ¼” TRS
  1- Unbalanced RCA
Performance 
Frequency Response 45 Hz – 22 kHz
Crossover Frequency 2.7 kHz
LF Amplifier Power 100W Class D
HF Amplifier Power 50W Class D
Peak SPL (@ 1 meter) 104 dB
LF Driver 6.5” Kevlar®
HF Driver Type AMT
Diaphragm 6.8-inch2 (4,400 mm2)
Equiv. Diaphragm ø 3” (75 mm)
Input Impedance 20 kΩ balanced, 10 kΩ unbalanced
SNR (typical, A-weighted) >100 dB
Power 
Factory preprogrammed 100-120V ~50/60 Hz or 220-240V ~50/60 Hz
Standby Power < 0.5W
Protection 
  RF interference
  Output-current limiting
  Over-temperature
  Turn-on/off transient
  Subsonic filter
  External mains fuse
User Controls 
Volume Range A-type taper
HF Driver Linear, +1 dB, -3 dB, -6 dB
Highpass filter Linear, 60 Hz, 80 Hz, 100 Hz
Acoustic Space Linear, -1.5 dB, -3 dB, -6 dB
Energy Conservation Mode On/Off/Query
Cabinet 
  Vinyl-laminated, medium-density fiberboard
Physical 
Width 8” (203 mm)
Depth 10.3” (261 mm)
Height 13” (328 mm)
Weight 14.7 lbs (6.65 kg)

Hosa Technology HSX-005 Balanced 1/4 Inch TRS Male  3-Pin XLR Male HSX005

Type Audio, balanced
Conductor 24AWG OFC wire
Shielding 90% OFC spiral shield
Connectors 1 x REAN 1/4" TRS male phone connector
1 x REAN 3-pin XLR male connector
Length 5' (1.5 m)
More Information
Condition New
SKU BU-PS-R65-1
UPC 7018778266
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account