Pedaltrain Metro 24 24"x8" Pedalboard with Soft Case and Voodoo Lab Pedal Power 2 Plus Power Supply

Availability: Out of stock

Pedaltrain Metro 24 24"x8" Pedalboard with Soft Case and Voodoo Lab Pedal Power 2 Plus Power Supply

SKU
BU-M24-SC-PP
$238.98
Earning 238 points for this item
Applies only to registered customers, may vary when logged in.
Availability: Out of stock
Earn 10 points for writing a review for this product
Pedaltrain Metro 24 24"x8" Pedalboard with Soft Case and Voodoo Lab Pedal Power 2 Plus Power Supply
Pedaltrain Metro 24 24"x8" Pedalboard with Soft Case and Voodoo Lab Pedal Power 2 Plus Power Supply

Pedaltrain Metro 24 24"x8" Pedalboard with Soft Case

The Metro Series is Pedaltrain’s first three-rail pedal board system.  Pedaltrain’s new Metro Series is perfect for players who need a portable, grab-and-go solution. Musicians who live or work in urban settings or tight spaces will appreciate Metro’s low profile, horizontal orientation. Thanks to Pedaltrain’s new modified rail system, even the smallest pedals make an incredibly strong bond with the pedal board.

Metro 24 is big enough for your essentials, including almost all multi-effects units.Included with purchase is 72” of Pedaltrain’s professional grade hook-and-loop pedal fastener and plenty of zip ties for securing cables.

Metro 24 is available for purchase with Pedaltrain’s redesigned fitted soft case (featuring a heavy-duty metal zipper and reinforced stress points)

 

Features:

  • Durable 24" x 8" aluminum alloy pedalboard
  • Open, elevated, angled frame design for easy reach of pedals

 

Voodoo Lab Pedal Power 2 Plus 9V 12V 18V 24V DC Effect Pedal Power Supply

Filter, regulate, isolate, and protect!
Pedal Power® 2 Plus does it, and does it well, because
any less will degrade your pedal’s performance. Players everywhere upgrade to Pedal Power 2 Plus because it powers what conventional power supplies can’t. Pedal Power 2 Plus is hand made in the U.S.A., comes complete with cables, detachable AC power cord, a 5-year warranty, and simply makes you sound better!

 

Isolation is more than fixing ground loops.
Ground loops cause hum, and the solution is to break the unwanted ground path. Isolation is the best way to do it. Unlike other power supplies, Pedal Power 2 Plus isolates EVERY output. This eliminates tone robbing interaction between units. Now you can properly power everything from vintage overdrives to modern digital marvels that others just can’t!
      
Proprietary balanced transformer makes it possible.
A typical transformer, like those used in a wall wart, creates a large magnetic field that causes hum in any audio path near it. Pedal Power 2 Plus uses a custom designed, ultra-low noise toroidal transformer, with separate balanced windings for every output. Now even the most sensitive pedals can be dead quiet.

Switching power supplies aren’t for everything.
What’s good for charging a cell phone is NOT good for your pedals. While digital switching power supplies are small and inexpensive, they also generate unpredictable transients and extraneous noise. Pedal Power 2 Plus uses an audiophile quality linear supply for consistently stable, clean, pure power.

 

Features:

9V (x2) – High Current 9V and Line 6 Modelers
These two outputs each deliver 250mA allowing you to run high current draw effects like the Boss DD-20 Giga Delay or Line 6 DL4 Delay Modeler. Via switches underneath the Pedal Power 2 Plus, these two outputs can be separately configured for regulated (Boss Twin Pedals) or unregulated (Line 6 Modelers) power allowing you to run both units if so desired. These outputs can also power any standard 9V effects as well.   

9V (x2) – Standard 9V With Battery Sag Control
These outputs each have an available 100mA of power, but also allow you to SAG the voltage from roughly 4V to 9V. This feature can be enabled via the bottom panel switches. The SAG control is mostly useful for transistor-based fuzz, octavia, and distortion circuits, as most modern opamp designs are minimally affected by variations in supply voltage. We recommend turning SAG off if you’re going to run digital pedals like delay, chorus, and reverb.

18V/24V – Using Custom Cables
All of the outputs on the Pedal Power 2 Plus (and the original Pedal Power) are completely isolated allowing you to create different voltages. You can run effects like the current MXR Flanger by combining two 9V outputs to create a single 18V supply. By switching two outputs into 12V ACA mode, you can join them together to create a 24V output for powering numerous Electro-Harmonix stompboxes including the Deluxe Memory Man. 

Important!
Pedal Power 2 Plus is manufactured to operate from a specific supply voltage. There are three different models, which accept 100V, 120V, or 240V mains. All units sold in North America are for 120V only. You cannot operate a 120V Pedal Power using 240V power without the correct step down transformer. The supply voltage is marked on the bottom of the unit.

Short Circuit Protection
Each output on the Pedal Power 2 Plus is short-circuit protected. This means that if you have a short in a power cable, or one of your pedals malfunctions, PP 2 Plus will temporarily turn off the power to that pedal. All other outputs will continue to function normally with no long-term damage.

 

Pedaltrain Metro 24 24"x8" Pedalboard with Soft Case

Frame:

 

  • 24x8x1.4 inches (60.9x20.3x3.5 cm)

  • Featherweight, aircraft grade aluminum

  • 1.15 lbs. (878.84 g)

 

Included: 

 

  • 72 inches (183 cm) Pedaltrain’s professional grade adhesive backed hook-and-loop for securing pedals

  • Assortment of zip ties for organizing and securing cables

 

Voodoo Lab Pedal Power 2 Plus 9V 12V 18V 24V DC Effect Pedal Power Supply

Input

IEC connector:
120V 50/60Hz (North America model)
100V 60Hz (Japan model)
230V 50/60Hz (Europe/Australia model)

Model and input power are marked on the bottom of unit.


Output

 

5.5x2.1mm barrel connectors - center negative
Short circuit protected


DIP Switch: NORMAL

 


Output


DC Voltage


Max current

 


1-4 (ACA)

9V

100mA

 


5-6 (L6)


9V


250mA

 


7-8 (SAG)


9V


100mA


DIP Switch: ON


Output


DC Voltage


Max current

 


1-4 (ACA)

12.3V

60mA

 


5-6 (L6)


14.5V / 12V (unregulated)


50mA / 200mA+

 


7-8 (SAG)


Adjustable 4V - 9V


100mA


Included Cables

5.5x2.1mm right angle barrel connectors (6)
5.5x2.1mm straight barrel connectors (2)
5.5x2.5mm “red” barrel for L6 (1)
3.5mm mini plug for vintage MXR or Electro-Harmonix (1)
9V battery snap for pedals without a power jack (1)

 

 


Physical

 

6" wide x 3.4" deep x 1.8" tall (152 x 86 x 44 mm)
Weight: 2 lbs. (0.9 kg)

 


Special

 

Toroidal power transformer
Rear Courtesy Auxiliary AC outlet, 200 watts max

More Information
Condition New
SKU BU-M24-SC-PP
UPC 7016007801
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account