Peluso CEMC-6 Solid State Small Diaphragm Microphone w/ Wooden Storage Box

SKU
PEL-CEMC-6
$399.00
In stock

Peluso CEMC-6 Solid State Small Diaphragm Microphone w/ Wooden Storage Box

Peluso CEMC-6 Solid State Small Diaphragm Microphone w/ Wooden Storage Box Peluso CEMC-6 Solid State Small Diaphragm Microphone w/ Wooden Storage Box
Peluso CEMC-6 Solid State Small Diaphragm Microphone w/ Wooden Storage Box

The Peluso CEMC-6 is a solid-state small diaphragm condenser microphone capsule and amplifier set. The CEMC-6 ships with a cardioid pattern capsule with a 20 millimeter gold-sputtered diaphragm. Additional capsules are available in omni-directional, cardioid, and hyper-cardioid patterns. The CEMC-6 has very low self-noise. A high SPL allows it to handle very loud sources without distortion. A flat frequency response across its entire range provides a natural sound very true to your source. We achieve our balanced output with a generously sized transformer, eliminating interference and distortion. The CEMC-6 features a -10 dB and -20 dB pad switch and a two-position high pass filter with 75hz and 150hz settings. This versatile microphone is used in the studio on everything from vocals and acoustic instruments to drum overheads. For the remote recordist this is a great mic for orchestras, live audience tapers and location sound. You'll always get great results from the CEMC-6, one of the most versatile and best sounding small diaphragm microphones on the market.

Additional capsules with omni-directional, cardioid, wide cardioid, and hyper-cardioid patterns available.

Acoustically matched pairs available with our Stereo Kit.

The Single CEMC-6 ships with a hard mount. The Peluso Small Diameter Shock Mount is available separately.
Includes one CEMC-6 Microphone with Cardioid Capsule, a Hard Mount, and Wooden Storage Box

  • Type: Condenser Pressure Gradient w/ 20mm capsule
  • Frequency Range: 19Hz/25Khz
  • Polar Pattern: Cardioid w/ removable capsule
  • Sensitivity: 10 mv/pa
  • Impedance: 200 ohms
  • SPL: 156 dB w/ 20dB pad switch engaged
  • Equivalent Noise: 14 dB(A)
  • Power Requirements: Phantom - 48v ± 4v
  • Current Consumption: < 3.0 MA
  • Size: 22mm x 164mm
  • Weight: 134
More Information
Condition New
SKU PEL-CEMC-6
UPC 610370944189
Weight 11.000000
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account