PreSonus CDL Sub18 2000-Watt 18" Active Sound Reinforcement Subwoofer

SKU
PS-CDL-SUB18
PreSonus CDL Sub18 2000-Watt 18" Active Sound Reinforcement Subwoofer PreSonus CDL Sub18 2000-Watt 18" Active Sound Reinforcement Subwoofer PreSonus CDL Sub18 2000-Watt 18" Active Sound Reinforcement Subwoofer PreSonus CDL Sub18 2000-Watt 18" Active Sound Reinforcement Subwoofer PreSonus CDL Sub18 2000-Watt 18" Active Sound Reinforcement Subwoofer PreSonus CDL Sub18 2000-Watt 18" Active Sound Reinforcement Subwoofer
PreSonus CDL Sub18 2000-Watt 18" Active Sound Reinforcement Subwoofer
was $1,699.99 Special Price $1,599.99
SAVE $100.00
In stock

Designed to complement any full-range PA loudspeaker and a perfect companion for the PreSonus CDL-series full-range loudspeakers, the CDL Sub18 subwoofer delivers a powerful, clear, and accurate low-end punch. With 2,000 watts (peak) of Class D power; a direct radiating, ported enclosure; and a custom 18-inch low-frequency transducer with 4-inch voice coil that provides 7 mm of driver travel before over-excursion, the CDL Sub18 produces detailed low frequency performance audio for mobile and installed applications.

To provide maximum versatility with full-range systems, the CDL Sub18 features a variable lowpass filter, enabling you to accurately dial in the crossover transition between the subwoofer and full-range system. Two DSP presets provide extended low-frequency performance for a more natural response to suit a variety of applications. Onboard polarity invert facilitates cardioid array creation, and a Mono Mode function simplifies cabling multiple mono subs in a stereo system.

Like full-range CDL-series loudspeakers, the CDL Sub18 has a rugged, tour-grade enclosure. A locking IEC power connector, M10 rigging points, integrated castor provisions, and ground-stacking provisions make it a great choice for a wide variety of mobile and install applications. One XLR line-level input and one XLR direct line-level output are provided to connect full-range systems or multiple subwoofers in larger systems.

With flexible connectivity; a rugged, tour-grade enclosure; and generous Class D power, the CDL Sub18 delivers the versatility and punch expected from today’s professional sound systems and is an excellent solution for permanent installations. Yet it’s also portable, making it a top choice for tours and other mobile use. Although designed to complement CDL-series full range loudspeakers, the CDL Sub18 is also an excellent companion for third party loudspeakers thanks to its onboard variable lowpass filter. The CDL Sub18 delivers outstanding low-end clarity and natural music reproduction.

The CDL Sub18 is equipped with M10 rigging points for suspended installation. PreSonus recommends the use of the M10-AI Kit. A minimum of four suspension points must be used per speaker to safely suspend the CDL Sub18.

Do not suspend additional loudspeakers or other items from the CDL Sub18.

A screw-lock pole cup is also provided to support a top-mounted full-range enclosure for ground-stacked applications. When used with any full-range CDL-series loudspeaker, PreSonus supports a maximum sub pole height of 31 inches. Other configurations have not been tilt-tested for safety and should be managed with caution.

Features

  • 18 – inch custom woofer with 4 – inch voice coil with 7 mm driver travel
  • 2,000W Class D power (1,000 continuous)
  • 1 – Balanced XLR Input
  • 1 – Balanced XLR Direct Output
  • Onboard DSP: Variable Low-pass filter, Output Power Preset Select, Polarity Invert
  • M20 threaded pole receiver to mount PreSonus® CDL Speakers
  • M10 mount points
  • Signal, -3 dB, Limiter Protection, and Clip Monitoring LEDs
  • Rugged, lightweight plastic enclosure and tour-grade, 1.2 mm steel grille — great for touring bands and mobile DJs
  • LF Driver: 18” (4” voice coil)
  • Amplifier Type: Class D
  • Total System Power: 2,000W Peak (1,000W RMS)
  • Frequency Range: 45 Hz to 150 kHz Variable (+/- 3dB)
  • Maximum Peak SPL: 135 dB
  • Crossover Frequency: 90 Hz
  • Low Pass Filter Range: 50 Hz – 150 Hz
  • Inputs: 1 Line (XLR)
  • Outputs: 1 XLR Direct Line (XLR)
  • User Controls: Output Level, Low Pass Filter, Output Power Preset Select, Polarity Invert
  • Dims: (H x W x D) 22.75” x 24.5” x 25” (577.8mm x 622 mm x 635 mm)
  • Weight: 105.8 lbs (48 kg)
More Information
Condition New
SKU PS-CDL-SUB18
UPC 673454012402
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account