Red Panda Remote 4 4-Mode Passive Footswitch Controller

Remote switch with 4 modes to access presets and pedal functions. Scribble strips above each switch can be labeled with a Sharpie and erased using isopropyl alcohol.

Connects to our pedals via a 1/4" TRS cable (included). The Remote 4 does not require power.

Tensor Loop Sampler (Remote Mode 3)

Mode 3 is designed to use the Tensor as a loop sampler with live loop manipulation. Switches A-C control loop record, overdub, play, and retrigger functions. Switch 4 toggles between the current knob settings and the default (normal playback settings). For example, you can set SPEED to reverse and PITCH to -1 octave for instant access to reverse and half-speed effects. See the user's manual for complete details.

Configuring the Remote Switch (all pedals):

• Start with the pedal powered on and nothing plugged into the CTRL port.
• Hold the right footswitch while plugging in the remote switch. The right LED will blink yellow 3 times to indicate it is in CTRL configuration mode. You can release the right footswitch and begin configu-ration immediately.
• Press one of the buttons on the remote switch to select a mode.
• Hold the right footswitch for 2 seconds to save the configuration. The right LED will blink green to indicate that the configuration has been saved.