Rivera Amplification Rivera Sedona Lite 25 - 25-watt 1x10" Acoustic and Electric Tube Combo

Rivera Amplification Rivera Sedona Lite 25 - 25-watt 1x10" Acoustic and Electric Tube Combo

The new ultra portable Sedona Lite 1×10 combo delivers 25 watts of dynamic 6V6 tube power, complemented by a full-range speaker system with a custom Rivera 10′ speaker and a special high-power, liquid-cooled dome tweeter which can be switched off when using and electric guitar.

Two independent channels of warm, glorious vacuum tube tone enhance and wrap every note you play in an envelope of light. Each channel has 3-band equalization, along with several exclusive tone-enhancing features, including a Notch switch that allows you to change the characteristics of the vital mid-range frequencies, and a Bright switch to accentuate the harmonics.

Channel 1 features a special ultra-low-noise input that allows you to accept signals from balanced or unbalanced instruments or a microphone.

Instruments like the Taylor ES series with balanced outputs will be at their optimum when used in Channel 1 with the balanced input.  Even if your guitar is an inexpensive model, using it with the Sedona Lite, will provide your sound with the best of tonal ingredients.

Channel 2 features a harmonically active unbalanced input to amplify either a passive or active instrument, including electric guitars.

Instruments with multiple outputs, such as the Fishman system that utilizes a microphone as well as a piezo transducer, can utilize both channels simultaneously to balance the level and tone between the two instrument signal sources.

For lounge and small-venue performers wanting to keep it simple, the Sedona Lite can act as a small P.A. system as well as an instrument amplifier. Just plug your microphone into Channel 1 and your instrument into Channel 2, and, voila, you have the warmth of tubes for your voice as well as your instrument.

In the age of digital effects, we are proud to provide the legendary, costly, analog Accutronics mechanical reverb as a standard feature. With its special deep, lush sonic character, it enhances your tones with a sweet and natural swell and decay.

With built-in parametric anti-feedback controls on the front panel, you can easily eliminate irritating low-frequency droning sounds as well as enhance the overall tone of your instruments.

Adding presence and shimmer to your instruments and voice is simple with the Presence control, conveniently located on the front panel.

Turn on the tweeter switch when using the Sedona Lite for your Acoustic Guitar.  Our own proprietary super high power dome tweeter produces the sweetest highs without the quack and shrills produced by normal piezo tweeters.

Patching your pedals or rackmount effects was never easier with a full serial effects loop that features separate level controls for the send and return. (Paul Rivera invented this concept almost 40 years ago with his previous work designing amps for Fender and Yamaha.)

Recording your Sedona Lite or providing a live feed to a house P.A. system is a snap with the separate direct output with its own level control.

An extra rear-panel speaker jack is provided, so adding an external Sedona extension enclosure for those larger gigs takes only seconds.

All Rivera Amplification amps are built to robust military standards. We utilize the finest components, the same kind used in leading esoteric and exotic tube hi-fi systems. Our cabinets are made of solid-core plywood and are constructed with interlocking dado joints. Every one of our amplifiers is rigorously tested to ensure that it conforms to our exacting specifications. As a Rivera owner, you can expect years of tonal pleasure from your new Sedona Lite.

Because we strive to constantly improve our products, specifications are subject to change without prior