The RØDE VideoMic is a professional grade 1/2" condenser shotgun microphone designed for use with consumer video cameras and personal audio recorders.
The integrated Rycote Lyre based shock mounting system isolates the VideoMic capsule and electronics from its all-metal shoe mount, providing isolation from external physical factors that may cause unwanted rumble and vibrations in the microphone. Constructed from a single piece of hard-wearing thermoplastic, the Lyre® provides superior acoustic suspension to traditional elastic solutions, and will never wear out, sag or snap.
Its standard sized shoe mount also includes a 3/8" thread in the base for easy mounting on a boom pole or stand.
By employing a super-cardioid polar pattern the VideoMic becomes highly directional, focusing on the subject in front of the camera, and minimising any surrounding sounds.
In addition to the microphone's native 40Hz-20kHz response a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded.
A -10dB and -20dB level attenuation (or PAD), selectable from inside the battery compartment, allows recording of loud sound sources, such as live music or motorsport.
The RØDE VideoMic directional on-camera microphone is designed in Australia and covered by RØDE Microphones' industry leading 10 year warranty.
The RØDE Micro Boompole provides ultimate boom pole performance in a convenient and portable size.
Intuitive twist locks allow the Micro Boompole’s three sections to smoothly extend to 2063mm (6¾’), while the ergonomic grip provides comfort during use.
Its artificial fur is specially designed so as to minimise wind noise while remaining acoustically transparent.
Compatible with NTG-1 NTG-2 Video Mic WSVM
It is ideal for use to connect a RÃ˜DE VideoMic, Stereo VideoMic or VideoMic Pro when the microphone is mounted on a boompole, or away from the camera or recorder.
The VC1 can also be used as a high quality headphone extension cable.
Acoustic Principle: Line Gradient
Active Electronics: JFET impedance converter
Polar Pattern: Cardioid; Paired cardioid capsules in X-Y stereo pattern
Address Type: End
Frequency Range: 40Hz - 20kHz (selected HPF @ 0)
Output Impedance: 200Ω
Maximum SPL: 134dB SPL (@ 1kHz, 1% THD into 1KΩ load)
Sensitivity: -38.0dB re 1 Volt/Pascal (12.60mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Equivalent Noise Level (A-weighted): 20dB-A
Power Options: 9v battery powered
Dimensions: 65.00mmH x 102.00mmW x 250.00mmD
Output: Minijack/ 3.5mm output
Dimensions: 844.00mmH x 33.00mmW x 33.00mmD