SPL BiG 500 Series Stereo Image Bigger Maker Expander Module

SKU
SPL-SPLBIG
$499.00
Starting at $42/mo with .
Out of stock

BiG

The Stereo Image Bigger Maker for 500 Series.

500 Series double-slot module for stereo stage processing.

BiG is special.
BiG is unique.

BiG enlarges the stereo image in a new manner and opens up new creative ways of sound shaping. Intuitive with just three controls.

On/Bypass

The On/Bypass switch activates (On) or deactivates (Bypass) the module. This allows you to quickly switch between processed and unprocessed signal.

Signal LEDs

The signal LEDs (Sig) indicate whether an audio signal is present at the input of the respective channel. (With a level higher than -20 dBu)

Stereo Image Shaping

Range

With the Range control, the frequency Range which should be processed can be selected.

Stage

With the Stage control, the frequency range previously selected with the Range control can be moved backwards or forwards on the stereo stage.

BIGNESS

The huge BIGNESScontrol adjusts the intensity of the STEREO IMAGE SHAPING.

The BASS/Off switch can be used to activate (BASS) or deactivate (Off) an additional bass boost following the BIGNESS section.

The bass boost is performed by a passive filter implemented in a similar circuit to the one used in the AirBass function of the SPL IRON Mastering Compressor.

Black magic?

In BiG a difference signal derived from the input signal is processed by an analog filter network before mixed back to the original signal in a special mixing stage. This is not M/S processing but a completely different and new way of stereo-processing. The processed stereo signal, when summed to mono, creates a clean mono signal without phase shifts, cancellations, or other unwanted artifacts.

Sounds good

With all SPL devices we develop not only according to plan, but also by ear.
All important components are installed on the circuit boards using Through-hole technology. This way we can ensure that we can use the best sounding components.

Input & Output; balanced

  • Maximum input & output gain: 21 dBu
  • Input impedance: 20 kΩ
  • Output impedance : 150 Ω
  • Common mode rejection: > 82 dB
  • Frequency range (-3 dB): 10 Hz – 100kHz
  • THD & N (0 dBu, 10 Hz – 22 kHz): 0.03 %
  • Noise (A-weighted): -92.3 dBu
  • Dynamic range: 113 dB

Dimensions & Weight

Double-spaced module for 500 Series

  • Unit weight
    • 0.9 kg
    • 1.98 lbs
  • Shipping weight (incl. packaging)
    • 1.05 kg
    • 2.31 lbs
More Information
Condition New
SKU SPL-SPLBIG
UPC 4260149322234
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account