SPL Crimson 3 6-In/6-Out 24-bit/192kHz USB 2.0 Audio Interface, Black

SKU
SPL-DSHIP-SPLCRIMV3-BL
SPL Crimson 3 6-In/6-Out 24-bit/192kHz USB 2.0 Audio Interface, Black SPL Crimson 3 6-In/6-Out 24-bit/192kHz USB 2.0 Audio Interface, Black
SPL Crimson 3 6-In/6-Out 24-bit/192kHz USB 2.0 Audio Interface, Black
$1,299.00
Out of stock
Ships From Manufacturer

This product ships direct to your doorstep from the manufacturer. Please allow 24-72 hours extra processing time.

Shipping times vary, so please contact us for more information.

DropShip items are non-refundable and not returnable to Pitbull Audio. For more information, click here.

Crimson 3

Crimson, speakers, headphones, DAW. Ready is the recording studio.

Two Mic Preamps

  • 2 microphone preamplifiers in discrete technology
  • separate switchable phantom power for condenser microphones
  • High-pass filter to remove footstep sound and rumble before recording

Two Instrument Preamps

  • High impedance (Hi-Z) instrument jacks on front side

Talkback

  • Electret microphone with omnidirectional characteristic
  • Gain control on the front side

Channel & State LEDs

  • Traffic light LEDs for the analog inputs
  • Power (PWR)
  • Host – Mac/PC, iDevice, Tablet etc. detected
  • Midi In traffic LED

Analog Monitoring Inputs & DAW

  • Monitoring the analog mic/line inputs 1/2 with mono switching
  • Monitoring the analog instrument/line inputs 3/4
  • Monitoring the digital workstation inputs 1/2 & 3/4

Source& Digital In

  • Monitoring the three analog sources or feeds
  • Monitoring a digital source
  • Selection for digital input channels 1/2 & 3/4

Speakers | Artist Mode | Talk

  • Toggling the speaker pairs and the dim function
  • Activating the Artist Mode and Talk switch

Crossfeed

Adjusting the crossfeed when Phonitor Matrix is activated

Headphone Volume 1 & 2

Independent volume control for two headphones

Monitor Mix

Creation of a monitoring mix between the analog inputs and the analog & digital sources/DAW

Phonitor Matrix

  • Enables correct mixing on headphones
  • Removes the super stereo effect
  • Calculates the interaural levels and time differences

Volume

Control for the loudspeaker monitoring volume

The Revolution

in the headphone amplifier is the Phonitor Matrix, with adjustable crossfeed, thanks to which you can create mixes with headphones that sound the same on speakers.

The Phonitor Matrix in its largest expansion stage has three setting parameters: Crossfeed, Speaker Angle and Center Level.

In the Crimson 3, the center level is preset to -1 dB and the speaker angle to 30°. These are the most commonly used values.

The crossfeed function determines the crosstalk of the channels, the so-called interaural level difference. The intensity of the crossfeed is fully variable.

Microphone Input; XLR (balanced)

  • Maximum input gain (Gain fcc): 14.5 dBu
  • Input impedance: 10 kΩ
  • Frequency range (-3 dB): 20 Hz – 200 kHz
  • THD + N (10 Hz – 22 kHz, 30 dB) 0.003 %
  • Noise (A-weighted, 150 Ω, 30dB): -94 dBu
  • E.I.N. (150 Ω): -128 dBu
  • Common mode rejection (1 kHz): 70 dB

Instrument Input; 1/4", 6.3mm TRS Jack (balanced)

  • Maximum input gain (Gain fcc): 24 dBu
  • Input impedance: 1,1 MΩ
  • Frequency range (-3 dB): 20 Hz – 200 kHz
  • THD + N (10 Hz – 22 kHz, 1:1 Gain): 0.005 %
  • Noise (A-weighted, 1:1 Gain, 100 Ω): -89 dBu

Line/Source Preamplifier; 1/4", 6.3mm TRS Jack (balanced), RCA, 3,5mm Mini-Jack

  • Maximum input gain: 22.5 dBu
  • Input impedance (balanced): 20 kΩ
  • Input impedance unbalanced): 10 kΩ
  • Frequency range (-3 dB): 10 Hz – 200 kHz
  • THD + N (10 Hz – 22 kHz, 0 dBu): 0.002 %
  • Noise (A-weighted, 600 Ω): -95 dBu
  • Common mode rejection (1 kHz): -60 dBu

Speaker Output A (XLR, balanced) & B (1/4", 6.3mm TRS Jack, balanced)

  • Maximum output gain: 22.5 dBu
  • Output impedance (balanced): 150 Ω
  • Output impedance (unbalanced): 75 Ω
  • Volume control range: -78 dB – 0 dB

Headphone Amplifier; 1/4", 6.3mm TRS Jack (balanced)

  • Pin Wiring: Tip = L, Ring = R, Sleeve = GND
  • Output impedance: 33 Ω
  • Frequency range (-3 dB): 10 Hz – 200 kHz
  • Max output power (600 Ω): 150 mW
  • Max output power (300 Ω): 265 mV
  • Max output power (470 Ω): 670 mW
  • THD + N (10 Hz – 22 kHz, 0 dBu, 47 Ω): 0,0026 %

DA converter (ASIO direct)

  • Noise (44.1/48 kHz sample rate): -109 dBFS
  • Noise (88.2/96 kHz sample rate): -107 dBFS
  • THD + N (44,1/48 kHz, -15 dBFS, 10 Hz – SF/2): 0.0022
  • THD + N (44,1/48 kHz, -1 dBFS, 10 Hz – SF/2): 0.0014
  • THD + N (88,2/96 kHz, -15 dBFS, 10 Hz – SF/2): 0.0025
  • THD + N (88,2/96 kHz, -1 dBFS, 10 Hz – SF/2): 0.0032
  • Dynamic range (44.1/48 kHz sample rate): 109 dB
  • Dynamic range (88.2/96 kHz sample rate): 107 dB
  • Sample rates: 44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz
  • 0 dBFS calibrated to: 15 dBu

AD converter (ASIO direct)

  • Noise (44.1/48 kHz sample rate): -113 dBFS
  • Noise (88.2/96 kHz sample rate): -110 dBFS
  • THD + N (44,1/48 kHz, -15 dBFS, 10 Hz – SF/2): 0.002 %
  • THD + N (44,1/48 kHz, -1 dBFS, 10 Hz – SF/2): 0,001 %
  • THD + N (88,2/96 kHz, -15 dBFS, 10 Hz – SF/2): 0.0016 %
  • THD + N (88,2/96 kHz, -1 dBFS, 10 Hz – SF/2): 0,001 %
  • Dynamic range (44.1/48 kHz sample rate): 113 dB
  • Dynamic range (88.2/96 kHz sample rate): 110 dB
  • Sample rates: 44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz
  • 0 dBFS calibrated to: 15 dBu

Internal Power Supply

  • Operating voltage for analog audio: +/- 17 V
  • Operating voltage for digital audio: +5 V, +3.3 V
  • Phantom power: + 48 V
  • Power consumption: 16.8 W

External Power Supply

  • AC/DC switching adapter: Mean Well GE18/12-SC
  • DC plug: (+) pin 2.1mm; (-) outside ring 5.5mm
  • Input voltage: 100 - 240 V AC; 50 - 60 Hz; 0.7 A
  • Output voltage: 12 V DC; 1.5 A

Dimensions & Weight

  • W x H x D (width x height x depth): 330 x 67 x 212 mm / 13 x 2.64 x 8.35 inch
  • Unit weight: 2.8 kg / 6.17 lbs
  • Shipping weight (incl. packaging) 4 kg / 8.82 lbs
More Information
Condition New
SKU SPL-DSHIP-SPLCRIMV3-BL
UPC 4260149321442
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account