SPL Expansion Rack Rackmount for Phonitor 2 and SMC 7.1, Silver
This product ships direct to your doorstep from the manufacturer. Please allow 24-72 hours extra processing time.
Shipping times vary, so please contact us for more information.
"DropShip items are non-refundable and not returnable to Pitbull Audio. For more information, click here.” "
Rackmount for Phonitor 2 and SMC 7.1
The Expansion Rack also increases the number of active speakers or power amplifiers that can be connected from one to four.
Installed in the Expansion Rack, a Phonitor 2 or an SMC 7.1 can be mounted into a 19-inch rack.
The installation is the same for both devices. A detailed illustrated installation guide can be downloaded below.
The Expansion Rack is equipped with a rotary switch that passively routes the stereo output signal of Phonitor 2 or the SMC 7.1 to four stereo outputs.
Switching is passive, i.e. without active electronics in the signal path and without power supply.
Phonitor 2 or SMC 7.1 are expanded by three additional stereo outputs, so that for example full range, midfield and nearfield monitors can be connected.
Expansion Rack without rack ears
- The two rack ears can be removed from the Expansion Rack to set it up freely.
- The feet of Phonitor 2 can also be screwed under the Expansion Rack.
- Passive 1 to 4 Splitter
- Input, 1x stereo: XLR (balanced)
- Outputs, 4x stereo: XLR (balanced)
- Dimensions & Weight
- W x H x D (Width x Height x Depth): 482 x 88 x 303 mm / 19 x 3.46 x 11.93 inch
- Weight: 2.7 kg / 5.95 lb