SPL Phonitor 3 DAC Headphone Amplifier / Monitor Controller with Expansion Rack

SKU
SPL-DSHIP-2086
SPL Phonitor 3 DAC Headphone Amplifier / Monitor Controller with Expansion Rack SPL Phonitor 3 DAC Headphone Amplifier / Monitor Controller with Expansion Rack
SPL Phonitor 3 DAC Headphone Amplifier / Monitor Controller with Expansion Rack
$2,988.00
Out of stock
Ships From Manufacturer

This product ships direct to your doorstep from the manufacturer. Please allow 24-72 hours extra processing time.

Shipping times vary, so please contact us for more information.

"DropShip items are non-refundable and not returnable to Pitbull Audio. For more information, click here.” "

Phonitor 3 DAC is not only the ultimate headphone amplifier and monitoring controller with 120V technology – the integrated DAC makes it the perfect monitoring centerpiece for demanding producers as well as sound and mastering engineers working with digital sources or in the DAW.

Whether using USB, AES/EBU or S/PDIF - the integrated DAC with analog SLP120 converts digital PCM audio signals with a resolution of 32 bit and a sampling rate of up to 768 kHz. It converts DSD signals with a resolution of up to DSD256.

On the analog side, the Phonitor 3 DAC, based on the SPL 120V technology, offers the same monitoring quality as the big SPL mastering consoles – on loudspeakers and headphones. The analog Phonitor Matrix allows mixing and mastering on headphones in the highest quality – with the same spatial perception of the stereo stage as on loudspeakers.

The SPL Expansion Rack is not only a 19″ rack housing for the Phonitor 3 DAC, it also expands the connection possibilities. This allows the Phonitor 3 DAC to become a monitor controller for up to four stereo speaker pairs!

Home is where the heart is. That’s why we manufacture all devices in our own production facility in Niederkrüchten on the Lower Rhine, Germany.

  • Analog inputs & outputs: XLR (balanced)
    • Maximum input & output gain 32.5 dBu
    • Input impedance (XLR) 20 kΩ
    • Output impedance (XLR) 75 Ω
    • Common mode rejection ratio (XLR) -82 dB
    • Frequency range (0 dBu) 10 Hz – 100 kHz
    • THD +N (1 kHz, 0 dBu) 0.0009 %
    • Noise (A-weighted) -102 dBu
    • Crosstalk (1 kHz) -95 dB
    • Dynamic range 134.3 dB
  • Digital Inputs: DAC768
    • AES/EBU (XLR), PCM sample rates 44.1/48/88.2/96/176.4/192 kHz
    • Coaxial SPDIF (Cinch), PCM sample rates 44.1/48/88,2/96/176.4/192 kHz
    • Optisch SPDIF (Toslink F06) sample rates 44.1/48/88.2/96/mit Glasfaser < 1m: 176.4/192 kHz
    • USB (B), PCM sample rates 44.1/48/88.2/96/176.4/192/352.8/384/705.6/768 kHz
    • USB (B), DSD over PCM (DoP), sample rates 2.8 (DSD64), 5.6 (DSD128), 11.2 (DSD256) MHz
    • 0 dBFS calibrated to 15 dBu
  • Standard Headphones Output: 6.35 mm (1/4") TRS Jack
    • Wiring: Tip = Left, Ring = Right, Sleeve = GND
    • Source impedance 0.18 Ω
    • Damping factor (40 Ω) 180
    • Frequency range (0 dBu) 10 Hz – 100 kHz
    • Crosstalk (1 kHz, 0 dBu) -91 dB
    • THD + N (1 kHz, 0 dBu) 0.0003 %
    • Noise (A-weighted) -102 dBu
    • Output power (1 kHz, 1% THD, 250 Ω) 2 x 5 W
    • Output power (1 kHz, 1% THD, 32 Ω) 2 x 1 W
    • Dynamic range 134.5 dB
  • Internal Linear Power Supply with Shielded Toroidal Transformer
    • Operating voltage for analog audio +/- 60 V
    • Operating voltage for relays and LEDs +12 V
  • Mains Power Supply
    • Mains voltage (selectable, see fuse chamber) 230 V AC / 50; 115 V AC / 60 Hz
    • Fuse for 230 V T 0.5 A
    • Fuse for 115 V T 1 A
    • Power consumption max. 40 VA
  • Dimensions & Weight
    • W x H x D (width x height incl. feet x depth) 11 x 4 x 11.81 inch
    • Unit weight 10.8 lbs
More Information
Condition New
SKU SPL-DSHIP-2086
UPC 4260149320612
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account