SPL SMC 7.1 Surround Monitor Controllers
SKU
SPL-SPLSMC-71BL
SMC 7.1
Surround Monitor Controller
The SMC 7.1 expands analog surround monitoring to 8 channels and offers Solo, Solo-In-Place and Solo-To-Center as well as a headphone jack.
Inputs & Speaker Management
- Two 7.1 and two stereo input sources can be connected to the SMC 7.1. This is important because in monitoring, two productions are always compared with each other.
- A subwoofer can be added to a stereo input by activating the LFE button.
- Each loudspeaker can be switched on and off individually, and the SMC 7.1 remembers the last speakers used for each source.
- The Solo-In-Place function now turns the loudspeaker on/off switches into solo buttons. This allows each loudspeaker to be heard alone at its position.
- Solo-To-Center places the selected loudspeaker on the center speaker, so that it can be listened to exactly from the front in case critical listening is required.
- An alternative output is available for connecting a pair of stereo loudspeakers.
- The 45mm all-aluminium rotary knob moves an 8-level potentiometer.
- Mute is especially important when the DAW is sending full-range audio garbage due to a problem. Mute can be used quickly to protect speakers and hearing.
- As an alternative to the speakers, headphones can be used for monitoring. The headphones can be switched on and have their own volume control.
Expansion Rack
- The SMC 7.1 can be installed in the Expansion Rack to be screwed into a 19-inch rack.
- The Expansion Rack is equipped with a switch that can passively route the stereo output signal of the SMC 7.1 to four stereo outputs.
- In this combination, the SMC 7.1 is expanded by three additional stereo outputs.
- This allows a 7.1 loudspeaker array and full-range, mid and nearfield stereo speakers to be controlled and monitored.
- Analog inputs & outputs; XLR & DB25 (balanced)
- Maximum input: 22 dBu
- Input impedance: 20 kΩ
- Output impedance: 100 Ω
- Frequency range (-3 dB): 10 Hz – 150 kHz
- THD +N (10 Hz – 22 kHz, 0 dBu): 0.001 %
- Noise (A-weighted): -93 dBu
- Crosstalk (1 kHz): -92 dB
- Common mode rejection (1 kHz): 82 dB
- Dynamic range: 115 dB
- Standard Headphones Output, 6.35 mm (1/4") TRS Jack
- Wiring: Tip = Left, Ring = Right, Sleeve = GND
- Frequency range (-3dB): 10 Hz – 80 kHz
- Crosstalk (1 kHz): -70 dBu
- Total harmonic distortion (0 dBu, 1 kHz, 40 kΩ load): 0.001 %
- Noise (A-weighted): -93 dBu
- Dynamic range: 115 dB
- Internal Linear Power Supply with Toroidal Transformer
- Operating voltage for analog audio: +/- 18 V
- Operating voltage for relays and LEDs: +12 V
- Mains Power Supply
- Mains voltage (selectable, see fuse chamber): 230 V AC / 50; 115 V AC / 60 Hz
- Sicherung für 230 V: T 500 mA
- Sicherung für 115 V: T 1 A
- Power consumption: max. 30 W
- Dimensions and Weight
- W x H x D (width x height x depth)
- 278 x 100 x 330 mm
- 11 x 4 x 13 inch
- Unit weight
- 4.1 kg
- 9.04 lbs
- W x H x D (width x height x depth)
Condition | New |
---|---|
SKU | SPL-SPLSMC-71BL |
UPC | 4.26015E+12 |
Write Your Own Review