Synergy SYN1 Tube Preamp Module Dock w/ Friedman HBE Module

Synergy Amps SYN1 Single Module Tube Preamp

Unlock the full potential of your Synergy preamp modules with the convenient and powerful SYN-1 Single Module Tube Preamp Dock. The SYN-1 is a roadworthy, professional housing that is compatible with any of Synergy’s interchangeable preamp modules. Want to change your sound? Simply slide in a different Synergy preamp module and you can access a whole new array of boutique amp tones.

The SYN-1 provides a powerful, flexible gateway to boutique tone in several different ways. Using the SYN-1 loaded with a Synergy module you can:

1. Go direct out (XLR or ¼”) into a recording console, concert venue mixer or powered monitor
2. Add two new “boutique” channels to your current amp via the series effects loop

Run from the direct out of the Synergy into your current amp’s input if there is no effects loop (This method does NOT bypass your preamp, and only gives you the 2 channels of your Synergy module)

GOING DIRECT

By taking advantage of the SYN-1’s direct recording and performance capabilities, you’ll send the real sound and feel of some of the world’s most iconic tube amplifiers right to your track or front-of-house. This is true tube-driven tone, not a digital emulation. The SYN-1’s direct XLR output boasts a cabinet simulation that is second to none, offering you a studio-grade tone that is as effortless to attain as hooking up an XLR cable. Do you have your own impulse response that you’d rather use? No problem. Simply bypass the cab sim on the back of the unit. And to further dial in your tube-amp experience, we worked hand in hand with legendary amp designer, Steven Fryette to outfit the SYN-1 with a front-mounted Sag control, supplying you with the feel and response that only a great tube amp can give.

• Intuitive and fast way to record great tube tone
• Balanced XLR output offers cab simulation with bypass
• Licensed Fryette Sag control lets you dial in the preamp’s feel and response
• Onboard effects loop for use with your rack and floor-based effects
• Ground lift eliminates unwanted signal noise
  
  

TURN ANY AMP INTO A “BOUTIQUE” TONE MACHINE

By hooking the SYN-1 to your amp’s series effects loop with a straightforward 3-cable method, you’re able to footswitch between the two channels on your Synergy preamp module and your amp’s built in channel(s). By clicking ‘bypass’ on the footswitch, you’ve now bypassed the amplifier’s preamp, giving complete tonal control to the SYN-1, and can switch between the two channels of the module. With the simple swap of a module you can turn any amp into a Diezel VH4, Friedman BE, Morgan AC40, or any other of the top-tier amps recreated in the Synergy line. Because each Synergy module boasts two footswitchable channels, and an effects loop, you can effortlessly call up new tones on the fly. Best of all, with the SYN-1’s onboard effects loop, you still have the ability to run your favorite rack and stompbox effects before or after the preamp section.

You might ask, “but my amp doesn’t have a series effects loop… can I still use the Syn1?” The answer is YES! You would simply use the ¼” direct out into the input of your amp. However, this method will only allow the use of the 2 channels on the Synergy module, and will not bypass the preamp of your existing amp… but it WILL give you two boutique amp channels!

• Harness the tones of top-tier amp builders through any series effects loop equipped amplifier
• Instantly replace any amp’s preamp section with an upgraded, tube-driven module of your choice, or switch between your amp’s preamp and the Syn1.
• Offers convenient and consistent tube tone for players relying on rental gear
• Add two additional channels to any series effects loop equipped amp
• Channels are easily footswitchable
• Select between your module’s channels and your amp’s internal tone on the fly

Synergy hardware and interchangeable pre-amps are protected under US patent.

Synergy Amps Friedman HBE Interchangeable Pre-Amp Module, Dave Friedman Designed

FRIEDMAN HBE – INTERCHANGEABLE PRE-AMP

Dave Friedman is the man behind some of the most impressive tones in rock 'n' roll, and has been for over 25 years. Throughout that time, luminary players such as Jerry Cantrell and Steve Stevens have been relying on Friedman's amplifier modifications, repairs, and builds to keep them sounding at the top of their game. With that expertise in tow, Friedman moved into crafting his own line of top-shelf electric guitar amplifiers, instruments, and effects, and in doing so has built one of the most enviable rosters of artists out there. Whether discussing the plexi-on-steroids tone of the BE-100, the pedal-platform versatility of the Buxom Beauty, or the fire-breathing Bill Kelliher signature Butterslax head, Friedman amps are undoubtedly taking over as the premier rock 'n' roll electric guitar amplifiers.

Few modern amplifiers carry the intrigue of Friedman's flagship BE-100. The amp's ability to dish out thick waves of overdriven power while simultaneously keeping the nuanced character of your individual style have made it the go-to amp for players and bands such as Dave Weiner (Steve Vai) and the Foo Fighters. One of these players' favorite features is the amp's HBE boost circuit. With a flip of a switch, the BE-100 slides from toothy hard rock amp to a high-gain fire breather without ever losing its calling card tight lows and clear note separation. When players talk about Friedman amps, the BE-100 is always at the top of the list.

Thanks to the Synergy Friedman HBE preamp, the exact tone and feel of the HBE-boosted BE-100 can be at your fingertips. Far from modeling or emulating, Dave Friedman himself designed this module, nailing every detail of his amp's to-die-for tone and impressive touch sensitivity. The HBE preamp boasts a pair of 12AX7 preamp tubes to power its two channels. Whether you're switching between a high-gain rhythm tone and a boosted lead sound or just want two channels of over-the-top sonic destruction, your tone will always be present, aggressive, and hopelessly addictive. When it’s time to give your Synergy rig cream-of-the-crop high-gain British tone with an extra kick, you'll want to grab an HBE Preamp.

The Synergy HBE pre-amp features two channels.  Each channel has a gain and volume knob with a shared three band EQ.

CATHODE SELECT SWITCH:

The Friedman HBE module includes a three position switch which allows you to configure the input tube bass response to match the original circuit of the selected module Patent Pending. Switch setting will will affect the feel and tightness. Each amp designer has a specific combination of components that makes up their input tube circuit. We have selected the three most popular combinations which you can access with this switch. You can experiment and try any of the positions to see what you prefer. The Friedman HBE module will come preset to Dave Friedman's preferred setting which is switch position 2 (2.7K resistor and .68uf capacitor).