Tascam DR-701D + Audio Technica M20x + Rode NTG2 & HDMI Cable Bundle

SKU
BU-DR701D-NTG2-M20X-JC2
$899.00
Out of stock

Tascam DR-701D Linear PCM Recorder for DSLR

The DR-701D is TASCAM's flagship recorder for single-shooter video production. A timecode generator is included for location reference, which can be jam synced from a SMPTE generator, camera, or smart slate. The HDMI in and out allows a DSLR camera to start recording on both devices, and video clock prevents drift between sound and picture.

Four mic inputs can be individually recorded and mixed to a stereo track, for a total of six-track recording. For additional tracks, multiple units can be cascaded together. The lightweight yet rigid chassis is forged from a magnesium alloy. Tripod mounts on the top and bottom of the unit allow the unit to mount under a camera, attach to a follow-focus cage, or used stand-alone.

Designed for the needs of professional filmmakers, television producers, advertisers, and documentarians, the DR-701D packs high quality multitrack recording into a package compact enough for use with any camera.

Features:

  • SD/SDHC/SDXC cards used for recording media.
  • 6 maximum simultaneous recording tracks
  • MONO, STEREO, 2MIX, DUAL MONO, DUAL ST and DUAL2MIX recording modes
  • Recording formats: 16/24-bit, 44.1/48/96/192kHz (WAV/BWF) (192kHz only for two-track recording)
  • Built-in original TASCAM HDDA mic preamps provide high audio quality
  • Input levels can be adjusted separately for each track
  • XLR/TRS inputs support +4dBu line level and 24/48V phantom power
  • Clock and record start/stop can be synchronized with a camera using the HDMI port
  • DR-701D audio signal can be output to an external camera or recorder from the HDMI OUT or line output
  • Cascade function using HDMI connections allows multiple DR-701D transport and monitoring operations
  • SMPTE Timecode can be input through the TC IN connector to add recording start times to files
  • Timecode generator (RTC) allows recording start times to be added to files even when there is no timecode input
  • Plug-in power mics and high output mics (EXT IN 1/2) supported
  • OUT (CAMERA OUT) connector can output audio mixed by the DR-701D to a DSLR camera
  • IN (CAMERA IN) connector enables monitoring the sound from a DSLR camera through the DR-701D
  • High quality audio output through a line output jack separate from the headphones jack
  • Headphones jack with 50mW+50mW maximum output
  • Tripod attachment threads (bottom), camera screw attachment that can be installed or removed with a coin (top) and shoe mount (top) included
  • Handles on the left and right sides of the front protect the control surface and also enable attachment of a shoulder strap
  • Transport and SLATE buttons made of rubber suppress noise during operation
  • HOLD switch prevents misoperation
  • 128×64-dot graphic LCD with backlight
  • LED lights have high visibility even in direct sunlight
  • High-speed transfer of files to computers possible using USB 2.0
  • Micro-B type USB cable included
  • Powered by 4 AA batteries, USB bus power or a PS-P515U AC adapter (sold separately)
  • BP-6AA external battery pack (sold separately) enables operation for even longer times
  • Optional RC-3F foot switch and RC-10 wireless remote control can be connected (both sold separately)
  • Built-in mixer enables pan and level adjustments as well as solo monitoring and can output a mix of 4 channels
  • GANG function allows the levels of multiple channels to be controlled simultaneously
  • Individual channel trim settings shown
  • 5-position low-cut filter (50/80/120/180/220 Hz) cuts unwanted low frequencies
  • Multiband limiter automatically adjusts input overloads (stereo-linking possible with 1/L and 2/R)
  • Delay function can compensate for distances between mics (+/-150 ms)
  • Mid-side decoder function enables use with mid-side stereo mics
  • Slate tone insertion functions (AUTO/MANUAL)
  • Slate tone insertion points can be selected (recording start or recording start and stop when slate AUTO function used)

 

Rode NTG2 Multi-Powered Shotgun Microphone

The RØDE NTG2 is a lightweight condenser shotgun microphone, designed for professional applications within the film, video, television and production industries.

Its full frequency response, low noise and audio transparency make it an ideal film, video, and voice over microphone, while its low weight (161gm/5.7oz without battery) makes it an ideal boom microphone.

In addition to the native 20Hz-20kHz frequency response a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded.

The NTG2 operates either from a AA (1.5V) battery or P48 phantom power which can be supplied by professional cameras, audio recorders and power supplies. The battery power option makes the NTG2 ideal for scenarios where the camera does not supply phantom power such as DSLR video.

The WSVM windshield is supplied to minimise light wind noise and plosives during recording. The optional 'DeadCat' furry is recommended for outdoor applications.

The RØDE NTG2 shotgun microphone is designed and made in Australia, and covered by RØDE Microphones' industry leading 10 year warranty.

Features:

  • Broadcast sound quality
  • Low noise circuitry
  • Condenser transducer
  • Rugged metal construction
  • Two step High Pass Filter (Flat/80Hz)
  • P48 phantom power or AA battery option
  • Low handling noise
  • Low weight - 161g (5.17 oz.)
  • Includes mic clip, wind shield and zip case
  • Ideal for professional applications within the film, video, television and production industries

 

Audio-Technica ATH-M20x Professional Monitoring Headphones

The ATH-M20x professional monitor headphones are a great introduction to the critically acclaimed M-Series line. Modern design and high-quality materials combine to deliver a comfortable listening experience, with enhanced audio and effective isolation. An excellent choice for tracking and mixing.

More About the M-Series Headphones
Critically acclaimed M-Series professional monitor headphones deliver accurate audio and outstanding comfort, perfect for long sessions in the studio and on the go. Contoured earcups seal tight for excellent sound isolation, with minimal bleed. And the pro-grade materials are durable, yet comfortable. Find out why online reviewers, top audio engineers, and cult followers agree, M-Series is an unmatched combination of audio and build-quality that gets the job done. Hour after hour, year after year.

Features:

  • Advanced build quality and engineering
  • 40 mm drivers with rare earth magnets and copper-clad aluminum wire voice coils
  • Tuned for enhanced low-frequency performance
  • Circumaural design contours around the ears for excellent sound isolation in loud environments
  • Convenient single-side cable exit
  • Designed for studio tracking and mixing

Rode SM3 Camera Shoe Shock Mount

The SM3 is a suspension shock mount with camera shoe adaptor for mounting various RØDE microphones onto a camera via the standard hot/cold shoe mount.

This allows you to connect your RØDE Microphone to a number of video and DSLR cameras on the market while giving your camera maximum isolation from any handling vibrations.

Please note that an adaptor may be required for some cameras with proprietary mounts.

 

Pig Hog PHM3 8mm Microphone XLR Cable 3ft

Pig Hog cables are precisely overbuilt to stand up to the most grueling tour conditions imaginable. They feature extra-thick 8mm wire, performance quality connectors, and tension-resistant stress relief. And with Pig Hog's "no question" lifetime guarantee, we've got your back for the life of the cable. Don't settle for those fat-free cables. Grab hold of a Pig Hog!

Features

  • High performance microphone cable

  • 8mm high quality rubber outer covering

  • Heat shrink protected connectors

  • Lifetime guarantee

 

Hosa HDMC-403 High-Speed HDMI Male to Mini-HDMI Male Cable (3 ft)

Hosa High Speed HDMI Cable with Ethernet is certified to carry the HD video signals transmitted by today’s multimedia devices. It is ideal for DSLR cameras, camcorders, and other HD video sources.

Features

• Bandwidth greater than 10.2 Gbps for all HDTV formats
• 10-bit color for vivid images
• Ethernet channel for network connectivity

 

Tascam DR-701D Linear PCM Field Recorder for DSLR Camera

Recording media SD card(64MB to 2GB), SDHC card(4GB to 32GB), SDXC card(48GB to 128GB)
Recording format  
WAV 44.1k/48k/96k/192k Hz, 16/24-bit
BWF 44.1k/48k/96k/192k Hz, 16/24-bit
Number of input channels  
44.1k/48k/96k Hz 4 maximum
192kHz 2 maximum
Number of recording tracks  
44.1k/48k/96k Hz 6 maximum
192kHz 2 maximum
Analog audio inputs *The maximum input level the level that the input knob can be adjusted and a digital full-scale(0dBFS) signal can be input without distorting.
*The minimum input level is the level that the input knob can be adjusted and a -20dBFS signal can be input.
IN 1, IN 2, IN 3, IN 4 XLR can provide phantom power
Connectors XLR-3-31 (1:GND, 2:HOT, 3:COLD)
6.3mm(1/4")standard TRS jacks(tip:HOT, Ring:COLD, Sleeve:GND)
Input gain ”LOW”/”MID”/”HI”/”HI+”時
Input impedance 2k ohms
Phantom power 48V +/-4V(10mA/CH), 24V +/-4V(10mA/CH)
Maximum input level +4dBu
Minimum input level -72dBu
MIC input gain TRIM MAX
LOW +20dB
MID +40dB
HI +52dB
HI+ +64dB
Input gain "LINE"時
Input impedance 10k ohms以上
Nominal input level +4dBu
Maximum input level +24dBu
EXT IN 1/2  
Connector 3.5mm(1/8")stereo mini jack (can provide plug-in power)
Input impedance 10k ohms
Maximum input level +10dBV
Minimum input level -50dBV
MIC input gain TRIM MAX
LOW +3dB
MID +11dB
HI +26dB
HI+ +38dB
IN  
Connector 3.5mm(1/8")stereo mini jack
Input impedance 10k ohms
Nominal input level -10dBV
Maximum input level +6dBV
Analog audio outputs  
LINE OUT  
Connector 3.5mm(1/8")stereo mini jack
Output impedance 200 ohms
Nominal output level -14dBV
Maximum output level +6dBV
OUT  
Connector 3.5mm(1/8")stereo mini jack
Output impedance 200 ohms
Nominal output level -44dBV
Maximum output level +6dBV
PHONES  
Connector 3.5mm(1/8")stereo mini jack
Maximum output 50mW + 50mW
Control inputs/outputs  
HDMI IN/OUT  
Connectors Type A receptacle
USB  
Connector Micro-B
Format USB2.0 HIGH SPEED mass storage class
TIMECODE IN  
Connector BNCConnector
Signal voltage amplitude 0.5Vp-p to 5Vp-p
Input impedance 10k ohms
Format SMPTE 12M-1999 compliant
REMOTE  
Connector 2.5mm TRS jack
Power 4 AA batteries(Alkaline, NI-MH or lithium), 
AC adapter(TASCAM PS-P515U, sold separately), 
External battery pack(TASCAM BP-6AA, sold separately)
Power consumption 6.5W(maximum)
Current consumption (USB bus power) 1.3A(maximum)
Battery operation time (continuous operation) 2ch WAV, 48kHz, 16bit rec
*When using phantom power, the operation time might be reduced depending on the mic being used.
DR-701D  
Lithium
(Energizer ULTIMATE LITHIUM)
About 7:30 : Built-in mic used for 3/4ch, Phantom power unused,HDMI not connected
About 6:30 : 1/2ch used, 3mA phantom power used for 2ch, HDMI not connected
About 3:30 : 1/2ch used, 3mA phantom power used for 2ch, HDMI input connected(1080/60i)
NI-MH batteries
(eneloop)
About 4:00 : Built-in mic used for 3/4ch, Phantom power unused,HDMI not connected
About 2:30 : 1/2ch used, 3mA phantom power used for 2ch, HDMI not connected
About 2:00 : 1/2ch used, 3mA phantom power used for 2ch, HDMI input connected(1080/60i)
Alkaline batteries
(EVOLTA)
About 3:45 : Built-in mic used for 3/4ch, Phantom power unused,HDMI not connected
About 2:00 : 1/2ch used, 3mA phantom power used for 2ch, HDMI not connected
About 1:30 : 1/2ch used, 3mA phantom power used for 2ch, HDMI input connected(1080/60i)
DR-701D + BP-6AA *BP-6AA is using the alkaline batteries (EVOLTA).
Lithium batteries
(Energizer ULTIMATE LITHIUM)
About 12:30 : Built-in mic used for 3/4ch, Phantom power unused,HDMI not connected
About 7:30 : 1/2ch used, 3mA phantom power used for 2ch, HDMI not connected
About 5:30 : 1/2ch used, 3mA phantom power used for 2ch, HDMI input connected(1080/60i)
NI-MH batteries
(eneloop)
About 9:30 : Built-in mic used for 3/4ch, Phantom power unused,HDMI not connected
About 7:00 : 1/2ch used, 3mA phantom power used for 2ch, HDMI not connected
About 4:00 : 1/2ch used, 3mA phantom power used for 2ch, HDMI input connected(1080/60i)
Alkaline batteries
(EVOLTA)
About 9:00 : Built-in mic used for 3/4ch, Phantom power unused,HDMI not connected
About 6:30 : 1/2ch used, 3mA phantom power used for 2ch, HDMI not connected
About 3:45 : 1/2ch used, 3mA phantom power used for 2ch, HDMI input connected(1080/60i)
Dimensions 169(W)×57.3(H)×113.5(D)mm (with the top adapter attached)
Weight 654g (including batteries) / 567g (without batteries)
Operating temperature 0˚C to 40˚C
Standard accessories USB cable, Camera attachment bracket screw hole covers × 6 Owner's Manual (including warranty)

 

Audio performance
Frequency response 20-20kHz +0.5/-1dB(LINE IN to LINE OUT, Fs48kHz, JEITA)
20-40kHz +0.5/-1dB(LINE IN to LINE OUT, Fs96kHz, JEITA)
20-80kHz +0.5/-5dB(LINE IN to LINE OUT, Fs192kHz, JEITA)
Distortion 0.007% or less(MIC IN to LINE OUT Fs44.1k/48k/96k/192k Hz, JEITA)
S/N ratio 100dB or more
(MIC IN to LINE OUT, -10dBu入力, 1kHz, Fs44.1k/48k/96k/192k Hz, JEITA)
Equivalent input noise -124dBu or less

 

Rode NTG2 Multi-Powered Shotgun Microphone

  • Acoustic Principle: Line Gradient

  • Active Electronics: JFET impedance convertor with balanced transformer output

  • Capsule: 0.50"

  • Polar Pattern: Supercardioid

  • Address Type: End

  • Frequency Range: 20Hz - 20kHz (selected HPF @ 0)

  • Output Impedance: 250Ω

  • Maximum SPL: 131dB SPL (@ 1kHz, 1% THD into 1KΩ load)

  • Maximum Output Level: 6.9dBu (@ 1kHz, 1% THD into 1KΩ load)

  • Sensitivity: -36.0dB re 1 Volt/Pascal (15.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz

  • Equivalent Noise Level (A-weighted): 18dB-A

  • Power Options: AA battery powered; +48v phantom power required from mixer or interface

  • Weight: 161.00gm

  • Dimensions: 280.00mmH x 22.00mmW x 22.00mmD

  • Dimensions: 280.00mmH x 22.00mmW x 22.00mmD

  • Output: 3-pin XLR output

 

Audio-Technica ATH-M20x Professional Monitoring Headphones

  • Type: Closed-back dynamic

  • Driver Diameter: 40mm

  • Magnet: Neodynium

  • Voice Coil: CCAW (Copper-clad aluminum wire)

  • Frequency Response: 15 Hz - 20 kHz

  • Maximum Input Power: 700 mW @ 1 kHz

  • Sensitivity: 96 dB

  • Impedance: 47 Ohms

  • Weight: 190 g (6.7 oz.), without cable and connector

  • Cable: 3.0 m (9.8') straight, left side exit

  • Accessories Included: 6.3 mm (1/4") snap-on adapter

 

Rode SM3 Camera Shoe Shock Mount

  • Weight: 83.00gm

  • Dimensions: 105.00mmH x 60.00mmW x 75.00mmD

More Information
Condition New
SKU BU-DR701D-NTG2-M20X-JC2
UPC 7018122158
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account