Taurus Stomp-Head 3.CL 60-Watt Ultra-Light Analog Guitar Amplifier, Master Tube Design

SKU
TAURUS-SH-3CL
Taurus Stomp-Head 3.CL 60-Watt Ultra-Light Analog Guitar Amplifier, Master Tube Design Taurus Stomp-Head 3.CL 60-Watt Ultra-Light Analog Guitar Amplifier, Master Tube Design Taurus Stomp-Head 3.CL 60-Watt Ultra-Light Analog Guitar Amplifier, Master Tube Design Taurus Stomp-Head 3.CL 60-Watt Ultra-Light Analog Guitar Amplifier, Master Tube Design Taurus Stomp-Head 3.CL 60-Watt Ultra-Light Analog Guitar Amplifier, Master Tube Design Taurus Stomp-Head 3.CL 60-Watt Ultra-Light Analog Guitar Amplifier, Master Tube Design
Taurus Stomp-Head 3.CL 60-Watt Ultra-Light Analog Guitar Amplifier, Master Tube Design
$799.99
Starting at $67/mo with .
Out of stock

Taurus Stomp-Head 3.CL 60-Watt Ultra-Light Analog Guitar Amplifier, Master Tube Design

The Stomp-Head 3.CL is an ultra light, very compact floor amplifier with integrated foot-switch designed to be set on the pedalboard along with effects or placed directly on the stage floor. An amplifier-equipped pedalboard provides a complete ready-to-use sound system. Simply connect a speaker cabinet, guitar and power source, then the system is ready to go.The amplifier can be also placed in a traditional way as a “Head” amp, on the top of the speaker cabinet. 

The Stomp-Head 3.Classic is an extremely light and small but still powerful and great sounding guitar amplifier. 

SH3.CL design is based on a MTD (Master Tube Design) technology. It is our own groundbreaking technology which permits us to create great sounding, powerful, fully analog amplifiers with extremely light weight and very compact dimensions. This technology uses all the significant features of tubes which determine the warm, classic sound of guitar amps. The sound characteristics and power of amplifiers based on our MTD technology are equal to the classic tube amps with the same power rating.

The guitarist has an access to two channels (CLEAN and LEAD) chosen by footswitch.  CLEAN channel gives a choice of two different sounds: CLEAN or slightly distorted CRUNCH which can be smoothly adjusted by a GAIN potentiometer  Two additional foot switches are assigned to control  BOOST and MUTE functions.         
The Stomp-Head’s 3 is equipped with power selector that allows to set 60Watt or 25Watt in STAGE MODE and 15Watt or 7Watt in STUDIO MODE. The amp is designed to work with 4, 8, and 16 ohm cabinets (Power Amp  adjust itself automatically  to speakers impedance).The Stomp-Head can also be used as a guitar preamp, without connecting speaker cabinet.
The LINE OUT (with a Speaker Cabinet Simulation) allows connect the amplifier to a mixer or an external power amp. The Speaker Cabinet Simulation imitates sound of the 4 x12 CELESTION Vintage 30 cabinets. The amp is also equipped with a serial Effect Loop.  

The guitarist has an access to two channels (CLEAN and LEAD) chosen by footswitch.  CLEAN channel gives a choice of two different sounds: CLEAN or slightly distorted CRUNCH which can be smoothly adjusted by a GAIN potentiometer  Two additional foot switches are assigned to control  BOOST and MUTE functions.
            
SH-3.CL is equipped with power selector that allows to set 60Watt or 25Watt in STAGE MODE and 15Watt or 7Watt in STUDIO MODE. The amp is designed to work with 4, 8, and 16 ohm cabinets (Power Amp  adjust itself automatically  to speakers impedance). The Stomp-Head can also be used as a guitar preamp, without connecting speaker cabinet.The LINE OUT (with a Speaker Cabinet Simulation) allows connect the amplifier to a mixer or an external power amp. The Speaker Cabinet Simulation imitates sound of the 4 x12 CELESTION Vintage 30 cabinets. The amp is also equipped with a serial Effect Loop.  

LINE OUT with a speaker cabinet simulation allows the connection of the amplifier to a mixer or an external power amp. LINE OUT signal simulates the sound of the 4x12 CELESTION Vintage 30 cabinet. Device is also equipped with a serial effect loop.

Features

  • Serial effect loop 
  • LINE OUTPUT with speaker simulation
    The ability to send the linear signal  with or without simulation or both at the same time
    Line output with Speaker Simulation. Allows send linear signal with simulation (PIN) or without simulation (RING) or both simultaneously
  • INPUT for external channel selector/controller
  • Head phones output
  • AUX-INPUT allows connect an audio player or send monitor signal to the headphones. 
  • The AUX  signal is send only to the headphones, bypassing  the speakers.
  • MIX-MODE  both amps channels can be mixed and used simultaneously
  • Power Output selector STAGE / STUDIO 
  • 15W or 7W / 4ohm, 8ohm,16ohm in STUDIO MODE
  • Speakers impedance auto detection 
  • Input GAIN boost (switch +6dB)
  • Technology : Master Tube Design
  • Power output: 60W RMS with a power brake to 25W,16 and 7W
  • Power Stage Efficiency: 130Watt
  • 2 channels: CLEAN and LEAD
  • 3 different sounds: CLEAN, CRUNCH and LEAD
  • 3 footswitches: CHANNEL [Clean/ Lead], BOOST, MUTE
  • Power output: 60W or 25W / 4ohm, 8ohm,16ohm in STAGE MODE
  • Power stage efficiency: 130Watt
  • Tubes: 12AX7
  • 2 channels: CLEAN and LEAD
  • 3 footswitches: CHANNEL [Clean/ Lead], BOOST, MUTE
  • CHANNELS controls: (CLEAN & LEAD):  GAIN, BASS, MIDDLE, MID-RANGE switch, TREBLE, PRESENCE, VOLUME and BOOST shared by both channels
  • BOOST: immediate  access to two different volume levels
  • Dimensions: [H x W x Dl] 90 x 270 x 205 mm
  • Weight: 2.2kg
More Information
Condition New
SKU TAURUS-SH-3CL
UPC 4065583057
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account