Warm Audio Foxy Tone Box Octave Up and Fuzz Pedal
The Return of a legend
The new Foxy Tone Box from Warm Audio is a hyper-accurate recreation of one of the most sought-after and beloved fuzz pedals of all time - used in the early seventies by legendary tone masters Billy Gibbons and Peter Frampton, and in the present day by folks like Adrian Belew, Nine Inch Nails and Beck. Covered in thick velvet just like the vintage pedal, the Warm Audio Foxy Tone Box faithfully recreates the vintage circuit and brings you the huge tone, octave-up sounds and look of the original…without having to pay crazy vintage prices!
Serious Attention to Detail
The specific components used in a pedal circuit are critical to the way that it sounds and reacts to your playing, so each Foxy Tone Box is assembled by hand using premium parts. We searched far and wide for a stash of the correct NOS (“New Old Stock”) Fairchild germanium transistors used in the original—and then paired them with germanium diodes, high-watt carbon resistors, and film capacitors to bring the fury of the vintage pedal to the present day. It’s true bypass, and it sounds like nothing else on earth!
fuzz it up
Just like the original, the Foxy Tone Box features controls for Volume, Sustain, and Fuzz (from “Mellow” to “Brite”), along with a switch to engage the pronounced octave effect. From mellow and subdued crunch to all-out searing fuzz and everything in between, this pedal is a virtual library of dirt encased in orange velvet!
To get started, keep the Octave switch off and roll the Fuzz to the “Mellow” side for warm, square-wave distortion. Then engage the Octave effect, crank the Fuzz to “Brite", and increase the Sustain for maxed-out, hyper-compressed tones that are barely hanging on for dear life! Electric guitar is the obvious application, but try it on synthesizers, drum machines, bass, acoustic/electric, and more. If you can plug a cable into it, the Foxy Tone Box can add character you just can’t get anywhere else.
Warm Audio PRO-TS-2RT-6INCH Pro Series Dual Right-Angle Guitar Instrument Cable, 6"'
Introducing Premium Cables by Warm audio
At Warm, we always put customers front and center in our decision-making. You are the reason that we put so much time and effort into ensuring that the products we bring to market sound amazing, are as affordable as possible and inspire endless creativity - we’re serious about this stuff!
We’re also serious about recording as an art, and we’re always looking for ways to help our customers achieve their sonic goals. With that mission in mind we partnered with Switzerland-based Gotham AG - Europe’s top producer of premium cable - to provide the cable stock for our entire new line of interconnects, and the results have exceeded our expectations!
Highest Quality Possible
With Warm Cables we knew that we wanted to offer the highest quality possible at a price low enough for everyone to afford, with construction robust enough that we could offer a lifetime warranty. Well known as the original supplier to some of the industry’s elite manufacturers (their 3-conductor wire was known simply as “the Neumann Cable” for decades), Gotham’s cable construction techniques and technology now represent the current state-of-the-art. We couldn’t be happier to partner with them on these new cables, and we can’t wait for you to use them!
Premier vs. Pro
Warm makes two lines of cable - Premier and Professional - in order to offer the largest number of options possible in two different price ranges. Both lines take advantage of Gotham’s state-of-the-art construction, offering absolutely stellar audio performance, near-perfect signal transfer and the ultimate in reliability (which is why they both feature a lifetime warranty!). Both cable lines produce fabulous results, but the Premier line adds above-and-beyond features like gold-plated connectors, four-conductor Starquad construction for powerful rejection of EMI and Double-Reussen shielding for increased rejection of RFI. There simply is no better-sounding or more reliable cable on the planet, and Warm Cables don’t come with a gold-plated price tag - these are wires that everyone can afford!
Warm Audio Premier and Pro cables are offered in XLR, XLR to TRS, TS to TS, and TS to angled TS varieties.
What does “StarQuad” mean?
A traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable’s length by removing signals that are common to both the hot and cold legs.
StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable.
What is Double-Reussen Shielding?
Most cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from interference.
Double-Reussen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from RFI for the internal cores, and can result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of current balanced cable technology.
Warm Audio Foxy Tone Box Octave Up and Fuzz Pedal
- Faithful recreation of the original “foxy” fuzz circuit with 100% analog, fully discrete signal path
- Premium components used throughout, including the NOS 2N3565 germanium Fairchild transistors found in the original circuit
- Uses carbon resistors, germanium 1N34A diodes, and premium film capacitors
- True bypass operation
- Gold-plated PCB pads
- VOLUME, SUSTAIN, and FUZZ knobs
- OCTAVE SUSTAIN switch for engaging the octave-up effect
- 1/4" Input (INST) and Output (AMP) jacks
- Blue LED power indicator
- Groovy vintage enclosure covered in orange velvet
- Powered by 9V battery or standard 9V DC pedal adapter (2.1mm, center negative DC adapter included)
- Power consumption: 1.5mA
- Width: 6.5"
- Depth: 3.75"
- Height: 1.5"
- Weight: 1.4 lbs
Condition | New |
---|---|
SKU | BU-WARM-FOXYTB-TS |
UPC | 679771636710 |